• Journal of Power Electronics
• /
• v.18 no.4
• /
• pp.1255-1267
• /
• 2018

Parasitic parameters have a larger influence on Silicon Carbide (SiC) devices with an increase of the switching frequency. This limits full utilization of the performance advantages of the low switching losses in high frequency applications. By combining a theoretical analysis with a experimental parametric study, a mathematic model considering the parasitic inductance and parasitic capacitance is developed for the basic switching circuit of a SiC MOSFET. The main factors affecting the switching characteristics are explored. Moreover, a fast-switching double pulse test platform is built to measure the individual influences of each parasitic parameters on the switching characteristics. In addition, guidelines are revealed through experimental results. Due to the limits of the practical layout in the high-speed switching circuits of SiC devices, the matching relations are developed and an optimized layout design method for the parasitic inductance is proposed under a constant length of the switching loop. The design criteria are concluded based on the impact of the parasitic parameters. This provides guidelines for layout design considerations of SiC-based high-speed switching circuits.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.225-228
• /
• 1998

This paper specifies the interface and procedures of AINI signalling protocol, which is defined for supporting interworking between ATM public network based BISUP and ATM private network based P-NNI. Also it is discussed in this paper that the required considerations such as message, information element and QoS to design AINI interworking scenario, and evolution direction.

• Proceedings of the Korean Reliability Society Conference
• /
• 2004.04a
• /
• pp.15-25
• /
• 2004

Inherent reliability depends on decisions made during design and manufacture. Reliability degrades with age and production rate (or usage level/intensity). System design based on some nominal production rate. Actual production rate can differ-depends on commercial considerations.(omitted)

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.1235-1237
• /
• 1998

Spacer Dampers must be carefully designed and tested. Because it can protect conductors from conductor oscillations due to winds and electrical forces. If the spacer damper has any problems in itself, it may cause extensive damage to the transmission lines. This paper suggests a design method and considerations of spacer damper for bundled conductor transmission lines.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.44
• /
• pp.287-295
• /
• 1997

In existing technology planning, there is lack of considerations such as technology fusion, users' requirements of future, gap analysis between technology development and production, and industrialization process of development technology, that is, technology diffusion and technology transfer strategy. The most noticeable thing is that there is an obvious transition from supplier-centered to consumer-centered in the development of service or product because users' needs are getting a diverse and high level with the paradigm change of industry and society in the 21st century. So it is very important to design effectively a technology planning system under integration of R&D-production-sales system for satisfaction of customers' various choices. In this paper, we present considerations being required strategically in technology planning through analysis of mutual relationship and interface between technology planning, R&D and production system.

• Electronics and Telecommunications Trends
• /
• v.8 no.2
• /
• pp.69-91
• /
• 1993

In the conventional speech processing, the technique of FFT(Fast Fourier Transform) is usually applied to the finite number of samples within the window of specified length using the fixed sampling rate. In this case, the temporal resolution is dependent upon the length of window while the spectral resolution is dependent upon the number of samples within the window. Thus, once the temporal resolution is determined the spectral resolution is also determined or vice versa. To resolve this type of dilemma, a new type of bank-filter similar to the characteristics of cochlear model needs to be considered. Furthermore, wide dynamic range of cochlea certainly helps the stable extraction of speech features. In the paper, the human auditory system will be briefly introduced and previous works on auditory preprocessors based on cochlear model will be reviewed. As a conclusion, the design considerations of auditory preprocessors based on cochlear model will be addressed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.5
• /
• pp.413-422
• /
• 1999

Auto-connected multipulse(12/24pulse) rectifier schemes are cost effective methods for reducing line current hamonics in PWM drive systems. Employing these schemes to enhance utility power quality requires careful attention to several design considerations In particular, excursion of dc-link voltage at no load, effect of pre-existing voltage distortion, impedance mismatches, unequal diode drops on rectifier current sharing and performance, are fully analyzed, Several corrective measures to improve the performance of 12/24­pulse rectifier systems are also discussed. Finally, experimental results on a 460V, 60Hz 400kVA commercial ASD, retrofitted with 12/24pulse rectifier systems are discussed in detail.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.22 no.3
• /
• pp.23-36
• /
• 1997

In the design of telecommunication network, the network configuration using hubbing topology is useful for designing and managing the network efficiently : i. e. all of central offices (COs) are grouped into clusters. Each cluster has one hub consisting of large-scale transmission facilities like digital cross-connect systems and ATMs. In clustering process, the community of interest and geographical factor should be considered. However, there exists a tradeoff between two factors. One is to minimize total link costs for geographical factor and the other is to maximize the total intra-cluster traffics for community of interest. Hence, this can be solved by multiobjective linear programming techniques. In this paper, the problem under considerations is formulated as two p-median subproblems taking into considerations total costs and total intra-traffics, respectively. Then we propose the algorithm to solve the problem based on the concept of cost-traffic tradeoff. The algorithm enables to identify efficient cost-traffic tradeoff pairs. An illustration is also presented.

• The KIPS Transactions:PartC
• /
• v.8C no.4
• /
• pp.415-420
• /
• 2001

VLSI 기술의 빠른 발전으로 디지털 시스템의 동작주파수가 높아짐에 따라 고속 통신시스템 의 하드웨어 설계 시 신호 무결성을 고려한 설계가 필수적이다. 디지털시스템에서의 잡음원 은 전송선에서의 전원장치, 접지 바운스, 실장 재료 등에 관련된다. 본 연구에서는 고속네트 워크/통신시스템의 기가비트 연결 설계기술에 필요한 요소들을 언급하였고, 실제 설계 신호 불연속에 영향을 미치는 커넥터의 누화 및 전송선의 표피 효과, 유전손실 등을 고려한 백플 레인보드를 시뮬레이션 하였다.

• The Korean Journal of Applied Statistics
• /
• v.24 no.3
• /
• pp.495-503
• /
• 2011

When a patent of an innovative (brand-name) small-molecule drug expires, generic copies of the innovative drug may be marketed if their therapeutic equivalence to the innovative drug has been shown. The small-molecule drugs are considered therapeutically equivalent and can be used interchangeably if two drugs are shown to be pharmaceutically equivalent with identical active substance and bioequivalent with comparable pharmacokinetics in a crossover clinical trial. However, the therapeutic equivalence paradigm cannot be applied to biosimilars since the active ingredients of biosimilars are huge molecules with complex and heterogeneous structures, and these molecules are difficult to replicate in every detail. The European Medicine Agency(EMEA) has introduced a regulatory biosimilar pathway which mandates clinical trials to show therapeutic equivalence. In this paper, we discuss statistical considerations in the design and analysis of biosimilar cancer clinical trials.