• Journal of the Institute of Electronics and Information Engineers
• /
• 제50권5호
• /
• pp.121-127
• /
• 2013

When input power is small, nonideal symmetric balance incomplete block design(BIBD) code design is effective in the spectral-amplitude-code(SAC) optical code-division multiple-access (OCDMA) system. But the number of simultaneous users is not sufficient. To overcome this property, we propose 2-D BIBD codes, where nonideal BIBD codes are used as spectral code and ideal BIBD codes are used as spatial codes. Analytical results show that the number of simultaneous users increases significantly.

• Journal of Wind Energy
• /
• 제13권3호
• /
• pp.5-12
• /
• 2022

A methodology of wind turbine blade design has been established with PROPID code, which is an aerodynamic blade design tool developed by UIUC. PROPID code can design and analyze a wind turbine blade in a steady state flow. The methodology of wind turbine blade design includes an initial blade concept design, airfoil selection, basic design, and detailed design steps. Inverse design and performance analysis of the 2.3 MW U113 wind turbine blade was performed to verify the wind turbine blade design methodology. The differences in calculated power between PROPID code and GH Bladed code are under 1.0% in all wind conditions. Both blade shape design and performance analysis results using PROPID code are accurate. The aerodynamic characteristics of a U113 blade were investigated by computational fluid dynamics. Separation flow was captured by a Reynolds-averaged Navier-Stokes steady flow simulation using ANSYS CFX code. The numerical aerodynamic analysis methodology was verified by comparing the analysis results through CFD with BEMT-based program GH Bladed code results. Therefore, the blade design methodology will be applied to develop a super-capacity 20 MW wind turbine blade in the future.

• Korean Journal of Computational Design and Engineering
• /
• 제19권3호
• /
• pp.224-235
• /
• 2014

Recently, Productivity of the construction industry has been decreasing than other industries. Because of this, BIM is being spread in the construction industry. However, quality criteria for BIM data is insufficient. Regulation information is an important factor for initial architectural design evaluations. However, building code and related regulation are numerous. National building code structure in Korea is much more complex than other countries. The purpose of this study is to suggest the typology method of building code and apply to real regulations. To achieve this purpose, the authors have extracted required information to from original regulation for code checking and suggested mapping methods between extracted information and information of IFC scheme. In addition, the authors have represented EXPRESS-G diagram for extracting information from IFC scheme and suggested code checking method through stair case. Output of this study can be used as a base line data for automated code checking system based on open BIM. Automated code checking system will be utilized in architectural design evaluations and supported to increase design quality. It can be used to mount in SEUMTER that is the construction administration system of Ministry of Land, Infrastructure and Transport (MOLIT).

• Korean Journal of Computational Design and Engineering
• /
• 제21권4호
• /
• pp.433-442
• /
• 2016

This paper aims to define the relational logic of in-between code articles as well as within atomic sentences in Korean Building Code, as an intermediate research and development process for the automated building permit system of Korea. The approach depicted in this paper enables the software developers to figure out the logical relations in order to compose KBimCode and its databases. KBimCode is a computer-readable form of Korean Building Code sentences based on a logic rule-based mechanism. Two types of relational logic definition are described in this paper. First type is a logic definition of relation between code sentences. Due to the complexity of Korean Building code structure that consists of decree, regulation or ordinance, an intensive analysis of sentence relations has been performed. Code sentences have a relation based on delegation or reference each other. Another type is a relational logic definition in a code sentence based on translated atomic sentence(TAS) which is an explicit form of atomic sentence(AS). The analysis has been performed because the natural language has intrinsic ambiguity which hinders interpreting embedded meaning of Building Code. Thus, both analyses have been conducted for capturing accurate meaning of building permit-related requirements as a part of the logic rule-based mechanism.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 한국전산구조공학회 1995년도 봄 학술발표회 논문집
• /
• pp.187-194
• /
• 1995

Traditional genetic algorithms(GA) have mostly used binary code for representing design variable. The binary code GA has many difficulties to solve optimization problems with continuous design variables because of its targe computer core memory size, inefficiency of its computing time, and its bad performance on local search. In this paper, a real code GA is proposed for dealing with the above problems. So, new crossover and mutation processes of read code GA are developed to use continuous design variables directly. The results of real code GA are compared with those of binary code GA for several single and multiple objective optimization problems. As results of comparisons, it is found that the performance of the real code GA is better than that of the binary code GA, and concluded that the rent code GA developed here can be used for the general optimization problem.

• Journal of the Institute of Electronics and Information Engineers
• /
• 제50권1호
• /
• pp.117-123
• /
• 2013

By calculating the spectral efficiency of symmetric balance incomplete block design(BIBD) codes satisfying BER=$10^{-9}$, it can be found that ideal BIBD code design with m=2 and various q's is effective when effective power is high($P_{sr}=-10$ dBm). But BIBD code design with q > 2 and various m's can be effective when effective power is low($P_{sr}=-25$ dBm).

• Structural Engineering and Mechanics
• /
• 제43권4호
• /
• pp.545-560
• /
• 2012

Design codes provide the minimum requirements for the design of code-compliant structures to ensure the safety of the life and property. As for code-exceeding buildings, the requirements for design are not sufficient and the approval of such structures is vague. In mainland China in recent years, a large number of code-exceeding tall buildings, whether their heights exceed the limit for the respective structure type or the extent of irregularity is violated, have been constructed. Performance-based seismic design (PBSD) approach has been highly recommended and become necessary to demonstrate the performance of code-exceeding tall buildings at least equivalent to code intent of safety. This paper proposes the general methodologies of performance-based seismic analysis and design of code-exceeding tall buildings in Mainland China. The PBSD approach proposed here includes selection of performance objectives, determination of design philosophy, establishment of design criteria for structural components and systems consistent with the desirable and transparent performance objectives, and seismic performance analysis and evaluation through extensive numerical analysis or further experimental study if necessary. The seismic analysis and design of 101-story Shanghai World Financial Center Tower is introduced as a typical engineering example where the PBSD approach is followed. The example demonstrates that the PBSD approach is an appropriate way to control efficiently the seismic damage on the structure and ensure the predictable and safe performance.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 한국지진공학회 1998년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Spring 1998
• /
• pp.188-195
• /
• 1998

The seismic design guidelines for the pile-supported marginal wharf structures are studied. Various design codes such as AASHTO code or UBC code, which are focused on general structures, may be referred for the design of the wharf structures. However, in developing domestic design code, special consideration should be made concerning the size of the earthquake and the type of the structure. This study aims at the comparison among the various design codes for a specific wharf structure in the process of developing a domestic design code.

• Steel and Composite Structures
• /
• 제5권5호
• /
• pp.395-405
• /
• 2005

This work introduces to the international scientific community the Chinese Code on fire safety design of steel building structures. The aim of the Code is to prevent the structure of a steel building subjected to fire from collapsing, ensure safe evacuation of building occupants, and reduce the cost for repairing the damages of the structure caused by fire. The main contents of the Code is presented in this paper, including the fire duration requirements of structural components, fundamental requirements on fire safety design of steel components, temperature increasing of atmosphere and components in fire, loading effect and capacity of various components in fire, and procedure for fire-resistant design of steel components. The analytical approach is employed in the Code and the effectiveness of the Code is validated through experiments.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.65-68
• /
• 2000

In CDMA, the currently used PN code acquisition methods detect the phase of the incoming PN signal on the basis of ML estimation. In serial search strategy, it takes relatively long time for PN code acquisition. A study related to reduce processing time of PN code acquisition is important. Therefore we propose a reference code design for a new algorithm that a reference code and the received PN code are fully correlated to detect the transmitted PN code, in detail, the relative phase offset j of c⒡. After choosing two weight factors, we show the mathematical analysis and derivation for the reference code design.