• 한국항공운항학회지
• /
• 제19권3호
• /
• pp.1-9
• /
• 2011

In this paper, a conceptual design process for Very Light Jet aircraft has been proposed incorporating aircraft safety certification. During the proposed design process, satisfaction of the airworthiness certification for an intermediate resulting aircraft configuration is evaluated and then redesigns are carried out if necessary and until the designed aircraft configuration satisfies the airworthiness requirements. Certification database has been developed using FAR 23, AC 23, KAS 23, and CS 23 as the airworthiness certification. Based on the developed certification database Design Certifcation Related Table has been produced to use the airworthiness requirements as design constraints in the propsed design process. Using Quality Function Deployment the design variables for a redesign are carefully selected and a design optimization is performed. To demonstrate the feasibility and effectiveness of rapid aircraft conceptual design using the proposed approach, a Very Light Jet design optimization including a redesign of wing flap has been performed and the design results have been presented.

• International Journal of Aeronautical and Space Sciences
• /
• 제13권4호
• /
• pp.435-445
• /
• 2012

In this paper, a design process is established by integrating aviation safety requirements for the development of general aviation aircraft. An Airworthiness-Design Integration System, which integrates certification requirements with the entire design/analysis process, is developed and presented. For the proposed system, KAS 23/FAR 23/AC 23/CS 23 certification regulations are analyzed to determine design constraints and system compliance checks and to construct an ER&G (Engineering Requirement and Guide) and a Design-Certification Related Table (DCRT). Furthermore, through building a DB (Data Base), the management of design and certification related resources for developing a FAR 23 class aircraft are made. Certification tools and resources are also efficiently managed by the DB. The connection between the certification requirements and the detailed design process is proposed in this system. Tracking of this proposed method is validated by configuring a USE CASE and a system. The Airworthiness-Design Integration system will be constructed based on the system's design plan, certification system, and usage scenarios.

• 항공우주시스템공학회지
• /
• 제2권4호
• /
• pp.13-18
• /
• 2008

Airworthiness is a term used to dictate whether an aircraft is worthy of safe flight. It is illegal in most countries to fly an aircraft without first obtaining an airworthiness certificate from the responsible government agency. For developing an aircraft, the design modifications and upgrades are considered a high financial risk proposal for most Program Managers(PMs). However Design-to-Certification Integrated System can be a great help in achieving a good design solution in an acceptable amount of time and flight test. In this paper, we present a method to construct database for the Development of Design-to-Certification Integrated System. By using this database, the human designer could manage and find the regulation and requirements related with his concern effectively.

• 대한안전경영과학회지
• /
• 제23권3호
• /
• pp.1-9
• /
• 2021

Crane is an important equipment for the transport of heavy goods in industrial sites, but it is also known as one of the most fatal machines. In order to reduce crane accidents, it is necessary to minimize human errors during crane operations. To achieve this, ergonomic design principles are recommended to be reflected from the crane design stage. The study analyzed the safety certification standards for crane that should be fulfilled at the crane design and manufacturing stage. This study selected five representative ergonomic design principles (feedback, compatibility, consistency, full-proof, and fail-safe) by surveying heuristic evaluation principles that are widely used for usability evaluation in early design stage. Next, the principles were applied to the safety certification standards to identify insufficient clauses. This study identified 12 insufficient clauses out of 119 in the current safety certification standards for crane and discussed their improvement directions to comply the ergonomic principles. The analysis results of this study can help of improving the safety certification standards and the method used in this study can also be applied to identify insufficient clauses in the safety certification standards for other industrial machines such as press machine and lift.

• 한국항공우주학회지
• /
• 제45권7호
• /
• pp.566-573
• /
• 2017

항공기의 설계 안전성을 보장하기 위하여 형식증명을 받아야 한다. 형식증명을 받은 항공기의 설계가 중대하게 변경되는 경우, 형식증명을 새로 받거나 개정형식증명 또는 부가형식증명을 신청하여야 한다. 국제민간항공기구, 미국 및 유럽의 인증 규정에서 부가형식증명 대상이 되는 설계변경에 대하여 매우 추상적으로 정의하고 있으므로, 본 논문에서는 설계변경에 관한 세계 각국의 인증절차와 인증사례를 분석하여 부가형식증명 대상이 되는 "광범위하지 않은 중급 설계변경"을 판단하는 기준을 제시하였다.

• 항공우주시스템공학회지
• /
• 제1권2호
• /
• pp.13-20
• /
• 2007

Structural qualification plan (SQP) for aerospace vehicle is based on material certification methodology, which must be approved by certification authority. It is internationally required to use of statistically based material allowables to design aerospace vehicles with aerospace materials. In order to comply with this regulation, it is necessary to establish relatively large amount of database, which increases test costs and time. Recently NASA/FAA develop the new methodology which results in cost, time, and risk reduction, and satisfies the regulation at the same time. This paper summarizes the certification methodology of materials system as a part of structural qualification plan (SQP) of aerospace vehicles and also thermal management of the vehicle system, like thermal protection materials system and thermally conductive material system. Materials design allowable was determined using this method for a carbon/epoxy composite material.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제25권4호
• /
• pp.61-70
• /
• 2019

Purpose: This study aims to find directions to improve the barrier-free (BF) certification criteria by assessing the current BF certification system, which is used as a method to improve access to passenger facilities and as a method for universal design planning, and by comparing BF certified facilities with non-BF certified facilities. Methods: This study assesses 20 BF certified facilities and 39 non-BF certified facilities, which were constructed in 2005 and onwards. The results of the assessment are compared and analyzed based on the following three categories: railway stations, urban railway stations and bus terminals. Results: The results of the analysis show that the total scores of the BF certified facilities are higher than those of the facilities that were not BF certified, indicating that the BF certification system is effective. Implication: However, there are some criteria items showing higher scores in facilities that are not BF certified than in BF certified facilities. This suggests the need to improve the BF certification criteria.

• 항공우주시스템공학회지
• /
• 제15권2호
• /
• pp.16-25
• /
• 2021

Reliability of fatigue strength on Aircraft Composites(GFRP) Structures was assessed in this paper. Fatigue strength of GFRP was used through the existing fatigue test data with Monte Carlo method. The S_a-N_f curve of composites fatigue strength was assumed as normal distribution and reliability was analyzed using SSIT model. Fatigue stress was designed IAW ASTM F3114-15 with special safety factor of S_sf=1.2~2.0. Reliability was calculated by analytic method and FORM. Sensitivity for the effect of mean and standard deviation of fatigue strength as well as fatigue stability was evaluated. This result can be usefully applied to reliability and fatigue design for composite structures of light weight aircraft.

• 한국실내디자인학회논문집
• /
• 제18권1호
• /
• pp.80-88
• /
• 2009

This study basically aims to examine how the GBCC system, which has been implemented since 2005 regarding school facilities, is actually being applied to schools and to survey students' satisfaction and awareness of school facilities. Ultimately, this study is to contribute to improving environment-friendly certification indexes and promoting the system. When it comes to research methods, a school with the green building certification and a school without it were selected for comparison, the two schools were visited for the investigation of their actual conditions, and then, based on the results, a survey was conducted for the students of both schools on their satisfaction(POE) of the school facilities, and finally, the results of the two schools were compared with each other and analyzed. The results of this study shows that the facilities of the school with the green building certification are much superior to those of the school without the certification as well as the former has more various facilities then the latter Nonetheless, facilities with the green building certification were found to miss something in terms of maintenance and management. Most of the survey questions show that students of the school with green building certification have higher satisfaction and awareness levels for school facilities than those of the other school students without the certification. However, the difference was a merely relative one, with most students of the school with the certification answering "so so" for their school facilities in terms of absolute evaluation.

• KIEAE Journal
• /
• 제16권6호
• /
• pp.29-38
• /
• 2016

Purpose: This study is conducted to contribute to the improvement of Green Standard for Energy and Environmental Design(G-SEED) from the existing energy physical efficiency-centric system to the well-being-centric green building certification system. Method: In order to modify existing G-SEED Certification, three phases of research have been conducted; 1) identification of needs of well-being-centric environment-friendly construction certification system, 2) comparison of domestic certification system with WELL Building standard(WELL) which focuses on human health and promotion of wellness and 3) AHP analysis to sort out the supplement items from WELL. Result: We proposed four alternatives which should be preferentially introduced to the existing domestic certification system; addition of independent 'well-being' section(field) in G-SEED, insertion of 'well-being' indicators in each relevant section of G-SEED, addition of 'well-being' indicators in 'Innovative Design(ID)' of G-SEED and independent score systems for 25 items in a high priority.