• 전기학회논문지
• /
• 제56권8호
• /
• pp.1466-1470
• /
• 2007

MEMS design flow based on DFM concept is presented and applied to gyroscope design as a test case. It is purposed to contribute to the yield improvement by considering the process-related parameters from the design phase. After defining the performance requirements, the sensitivity analysis should be done on the draft design(s) to find out the key parameters related with the device performance. By doing so, TEG can be designed for the selected process and/or material parameters. Through a set of test runs, the process capability is characterized and the material properties are extracted using the TEG. Then we can estimate the virtual yield of the current process for the designed device by running Monte Carlo analysis where the process and/or material property variations are considered. The estimated yield will make us redesign the device to be more robust or improve the current process to have the smaller variations.

• 농촌계획
• /
• 제20권4호
• /
• pp.157-164
• /
• 2014

This study clarified the correlation between the satisfaction of farm experience village visitors and the package design of farm specialty products and identified the factors to consider when improving the package design. It was found that the satisfaction with package design when purchasing farm specialty products affected the satisfaction of farm experience village visitors. In case of farm experience village visitors, they were more satisfied with the purchase when they were satisfied with the package design of farm specialty products they purchased. The results of analysis of correlation between the satisfaction of farm experience village visitors and the improvement of package design of farm specialty products showed that the important factors of package design are easiness of transport handling, easiness of storage, and functionality of packaging materials.

• 한국환경과학회지
• /
• 제19권9호
• /
• pp.1169-1175
• /
• 2010

A case study for the design of a wind farm in complex terrain was carried out using the wind farm site analysis software OpenWind, which has an open-source platform and is free to use. The Youngdeok Wind Farm, constructed on mountainous terrain in Korea, was chosen as a model site; the design process reproduced using OpenWind. A comparison of the positions of the wind turbine derived from the OpenWind optimization process and the current positions were in good agreement. The annual energy production predicted by OpenWind compared with the prediction by the micrositing software, WindSim, were also validated to within 1%. Therefore, it was confirmed that OpenWind can be used for a practical wind farm design project. It is also anticipating that this paper will provide a prototype process for the design of a wind farm site and offer a database for the post-evaluation of a constructed wind farm in Korea.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 춘계학술대회 논문집
• /
• pp.77-81
• /
• 2002

A new method of optimal blank shape design using the initial nodal velocity (INOV) has been proposed for the drawings of arbitrary shaped cups. With the given information of tool shape and the final product shape, corresponding initial blank shape has been found from the motion of boundary nodes. Although the sensitivity method, the past work of Hynbo Shim and Kichan Son, has been proved to be excellent method to find optimal blank shapes, the method has a problem that a couple of deformation analysis is required at each design step and it also exhibits an abnormal behaviors in the rigid body rotation prevailing region. In the present method INOV, only a single deformation analysis per each design stage is required. Drawings of practical products as well as oil-pan have been chosen as the examples. At every case the optimal blank shapes have been obtained only after a few times of modification without predetermined deformation path. The deformed shape with predicted optimal blank almost coincides with the target shape at every case. Through the investigation the INOV is found to be very effective in the arbitrary shaped drawing process design.

• 디자인학연구
• /
• 제15권1호
• /
• pp.299-308
• /
• 2002

Along with the increasing social concern on cultural products and corresponding policy development by government many domestic regions have been trying to establish their own cultural identity. Based on the case stuffy for Gwang-Ju, this paper provides a methodology of developing cultural products from the unique regional resource. Its scope was classified into three categories: alread-developed, regional character and regional theme products. For this purpose, marketing strategies were established for quality improvement and promotion of cultural products through analysis on the current products including a questionnaire to customers. Then, conceptual designs for each scope were developed through the five steps of "selection of items", "target customer analysis", "concept establishment", "extraction of cultural factos7" and "derivation of conceptual design". The concept establishment was based on the expression of the material characteristics, the harmony of tradition and modernity, symbolization of images and so on. The cultural factors taken into account included the natural resources, historical heritages and landmarks. Finally, several examines of the conceptual designs were illustrated for commercial products. This study could be extended further in the future by introducing potential immaterial resources into the cultural factors.

• 소성∙가공
• /
• 제11권6호
• /
• pp.487-494
• /
• 2002

A new method of optimal blank shape design using the initial nodal velocity (INOV) has been proposed for the drawings of arbitrary shaped cups. With the given information of tool shape and the final product shape, corresponding initial blank shape has been found from the motion of boundary nodes. Although the sensitivity method, the past work of the present authors, has been proved to be excellent method to find optimal blank shapes, the method has a problem that a couple of deformation analysis is required at each design step and it also exhibits an abnormal behaviors in the rigid body rotation prevailing region. In the present method INOV, only a single deformation analysis per each design stage is required. Drawings of practical products as well as oil-pan, have been chosen as the examples. At every case the optimal blank shapes have been obtained only after a few times of modification without predetermined deformation path. The deformed shape with predicted optimal blank almost coincides with the target shape at every case. Through the investigation the INOV is found to be very effective in the arbitrary shaped drawing process design.

• 패션비즈니스
• /
• 제27권5호
• /
• pp.135-145
• /
• 2023

The purpose of this paper is to develop a workwear design framework that can be applied in workwear design. A general explorationstudy was conducted onworkwear concepts and market research to understand the importance and growth potential of workwear. Subsequently, representative brands specializing in workwear are selected, and a case analysis of workwear is conducted with a focus on jackets, pants, and overall items. As a result, four key characteristics of workwear are derived: Ergonomic Pattern-making, Certified Fabric, Specialized Color, and Customized Details. To present a model that considers the functional, expressive,and aesthetic aspects of workwear simultaneously, the 'Function Express Aesthetic' (FEA) model is utilized as the foundation. The 12 derived elements in the newly developed framework combine these four characteristics with three aspects (functional, expressive, and aesthetic), allowing for comprehensive consideration and validation of workwear conditions. The new framework will be used in subsequent research for developing workwear prototypes and is expected to enhanceworkwear production by employing a systematic approach during the design ideation and evaluation stages. By effectively integrating functional aspects with expressive-aesthetic values centered on the functionality of workwear products, this framework will provide.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2001년도 봄 학술발표논문집 Vol.28 No.1 (A)
• /
• pp.583-585
• /
• 2001

RUP의 Unified Process Model 에는 Use-Case Model, Analysis Model, Design Model, Deployment Model, Implementation Model, Test Model의 6가지 모델이 있다. 이 모델들은 모두 일관성이 있다. 한 모델에서 나오는 요소들은 전, 후 단계에서 다른 모델들과 Trace Dependencies를 갖는다. 예를 들면, Use-Case Model에서는 한 Use Case는 Design Model에서 Use-Case Realization으로 Test Model에서는 Test Case로 Trace Dependencies를 갖는다. 소프트웨어 개발에서 추적성은 Understandability와 Change Propagation 과 같은 이유로 매우 중요하다. 그러나 RUP에서는 각 모델들간의 추적성에 대한 지침이 충분히 제시되어 있지 않아, 개발 과정중에 요구사항의 변경이나 에러 수정 또는 향후 관리 시에 어려움을 겪고 있다. 본 논문에서는 이 점에 중점을 두고 RUP에서 제시하고 있는 모델들 간의 추적성 중 설계모델에서 분석모델로의 추적성 적용지침을 제시한다.

• 한국가시화정보학회지
• /
• 제17권1호
• /
• pp.78-84
• /
• 2019

A gas turbine is the main equipment of a power plant that generates electricity by high-speed rotation of the rotor in a high-temperature environment. In particular, in the case of medium to large-sized gas turbines, the rotor is composed of a plurality of stages, and each component is exposed to different physical environments. Especially, in the case of the tip clearance of the turbine, it is a very important factor in the performance of the design items and the operation of the stable turbine, and a design considering the physical behavior of all major parts should be done. In this study, we will discuss the process of visualizing the physical behavior of turbine operating conditions and the method of designing tip clearance for stable operation by using commercial finite element analysis program for gas turbine assembly model and single product.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.491-495
• /
• 1997

In this paper, an effective mount design method using vector synthesis is presented for two mount systems. For designing mount stiffnesses effectively, we perform a sensitivity analysis, i.e, identify the contribution rate of an input component vector to the total output vector. Especially, we show that it is necessary to takea phase sensitivity into consideration in case of two mount systems, such as the excavator mount systems having engine mounts and cabin mounts. THe proposed method is testified is testified through an test bed.