• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.4
• /
• pp.708-712
• /
• 1987

This paper deals with minimizing layout area of VLSI design. A long wire in a VLSI layout causes delay which can be reduced by using a driver. There can be significant area increase when many drivers are introduced in a layout. This paper describes a method to obtain tight bound on the worst-case increase in area when drivers are introduced along many long wires in a layout. The area occupied by minimum-area embedding for a circuit can depend on the aspect ratio of the bounding rectangle of the layout. This paper presents a separator-based area optimal embeddings for VLSI graphs in rectangles of several aspect ratios.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.16 no.4
• /
• pp.15-24
• /
• 2010

The purpose of this study is to provide the basic guideline of the archite-ctural planning and design of the women's hospital for optimizing the area compostion and spatial allcoation. The method of this study is to investigate and analyze the functional spatial composition based on the area composition and spatial allocation of the 4 departments space in women's hospital through a analysis of 9 cases study. Data collecting skills such as drawing documents analysis, field survey and observation were used to examine of the present facility condition. Hence this research is to grasp the present condition of department of the women's hospital, to inquire the area composition and spatial allocation. Finally, The derived important factors are expected to use as the basic data at the time of planning for the space programing of design women's hospital.

• The KSFM Journal of Fluid Machinery
• /
• v.9 no.2 s.35
• /
• pp.44-49
• /
• 2006

In this study, the effects of volute area distribution on the performance of a centrifugal pump were numerically studied using a commercial CFD code. To reduce the shutoff head, maintaining head and efficiency at a design flow rate, the flat head-capacity characteristic curves in which the head varies only slightly with capacity from shutoff to design capacity are frequently required. In order to control the shutoff head of a pump, several volute cross-sectional area distributions were proposed as a main parameter with the same impeller geometry The calculation results show that the slope of the performance characteristic curve of the centrifugal pump can be controlled by modifying the area distribution from volute tongue to volute outlet with fixed volute outlet area and also varied volute outlet area.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.373-378
• /
• 2004

Recently the electrostatic 2-axis MEMS stages have been fabricated for the purpose of an application to PSD (Probebased Storage Device). However, most of them have low area efficiency, which is undesirable as data storage devices, since all of the components (springs, comb electrodes, anchors, platform, etc.) are placed in-plane. In this paper, we present a novel structure of electrostatic 2-axis MEMS stage that is characterized by having large area platform. For large area efficiency, the actuator part consisting of mainly comb electrodes and springs is placed right below the platform. In this article, the structures and operational principle of the MEMS stages are described, followed by design procedure, structural and modal analysis using FEM(Finite Element Method). The area efficiency of the MEMS stage was designed to be about 55％, that is very large compared with conventional ones having a few percentage.

• Journal of Mechanical Science and Technology
• /
• v.16 no.5
• /
• pp.591-598
• /
• 2002

Leakage magnetic flux is occurred in the cracked area of magnetized specimens, and also it changes the magnetic domain area of the magneto-optical film positioned on the specimen. It causes the change of the optical permeability of the magnetic domain on the crack area. So crack images can be obtained easily using this principle. On the other hand, utilizing a laser in this method makes possible to perform a remote sensing by detecting the light intensity contrast between cracked area and normal area. This paper shows the application of non-destructive inspection system taking advantage of magneto-optical method for micro-cracks and presents examples applied to the several types of specimens having fatigue cracks and fabricated cracks using this method. Also the authors prove the possibility of this method as a remote sensing system under the oscillation load considering application to real fields.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.497-502
• /
• 2005

In this study. the effect of volute area distribution on the performance of a centrifugal pump were numerically studied using a commercial CFD code. To reduce the shutoff head, maintaining head and efficiency at a design flow rate. the flat head-capacity characteristic curves in which the head varies only slightly with capacity from shutoff to design capacity are frequently required. In order to control the shutoff head of a pump, several volute cross-sectional area distributions were proposed as a main parameter with the same impeller geometry. The calculation results show that the slope of the performance characteristic curve of the centrifugal pump can be controlled by modifying the area distribution from volute tongue to volute outlet with fixed volute outlet area and also varied volute outlet area.

• Proceedings of the SAREK Conference
• /
• 2005.11a
• /
• pp.558-563
• /
• 2005

In this paper, the effect of volute area distribution on the performance characteristic curve of a centrifugal pump were numerically studied using a commercial CFD code. To reduce the shutoff head, maintaining head and efficiency at a design flow rate, the flat head-capacity characteristic curves in which the head varies only slightly with capacity from shutoff to design capacity are frequency required. In order to control the shutoff head of a pump, several volute area distributions were proposed as a main parameter with the same impeller geometry. The calculation results show that the characteristic curve of a centrifugal pump can be controlled by modifying the area distribution with the same volute outlet area.

• Journal of the Korean housing association
• /
• v.18 no.1
• /
• pp.53-60
• /
• 2007

Storytelling approach is the way to formulate and solve problems using stories. Story is a means to understand and react everyday life that can be regarded as multi-dimensional problems. The approach becomes popular in various fields in conjunction with digital technology. In particular, it is used to solve problems in relation to whole context. In design, storytelling approach is used to clarify design constraints. It can be used to clarify and communicate thoughts for design artifacts, and to understand how the artifacts might be used in particular circumstances. In particular, the approach is useful to use under uncertain circumstances. In architecture, storytelling approach can be used in the area of design generation, design critique and capturing design knowledge. In design generation, it can be used to describe and formulate design experiences rather than simple designing artifacts. The approach formalizes design based on stories of user experiences. Digital technology such as virtual reality can be used to experience designed spaces for design modifications. In design critique area, it can be used to fill uncertain facts for historical buildings as welt as different from present status. Such stories can be used to build digital modeling and used to open criticism. Stories can be used to formalize knowledge in architectural domain as a form of implicit knowledge for certain projects. In architecture, it often is required to design types of environment never experienced before as well as to accomodate fast changing technologies. Storytelling methodology can be used as a method to cope with uncertainty and complexity in design requirements along with accumulating design knowledge.

• Proceedings of the ESK Conference
• /
• 1995.04a
• /
• pp.155-164
• /
• 1995

For efficient operation, vital hand controls must be easily controlled by the operator from his normal working position. The primary working area based on operator's working comfort was developed to serve as a design guideline tothe control panel layout. Ten male subjects participated in the experiment in which working comfort was measured for two controls of a lever type control and a knob type control with respect to the frontal and sagittal distances from the body center and the slope of a workplace. The response surface methodolgy using a central composite design was employed to develop a prediction model for perceived working comfort of each control. Both controls have a similar pattern of comfortable working area, but the lever type control has slightly broader working area. The concept of the proposed working area is a significant extension to the conventional working area such as Farley's or Squires' curves. It is shown that the distance toa control device and the slope have a quadratic effect to working comfort. It is noticeable that comfortable working area exists outside the conventional working area. The result of the response surface analysis also indicated that a little slope of about 15 .deg. for a control panel improves working comfort.

• Korean Institute of Interior Design Journal
• /
• v.23 no.5
• /
• pp.157-164
• /
• 2014

The subject specialization room will be able to support university library users who are inclined to use the general reading room. This study is the research of the area planning for university library's subject specialization room. For the evaluation, 431 users from 15 university libraries in 14 universities located across Seoul were surveyed. Statistical analysis was performed using SPSS. Frequency, percentage, mean, t-test, f-test were used. Results of the study are as follow. Subject specialization rooms in university libraries can be classified via the analysis of spatial characteristics. According to the area ratio of data space and reading space in a subject specialization room, the subject room can be separated into data-loaning and data-reading types. Old libraries are more likely to be data-loaning types, where reading room is small and there are a lot of bookshelves. The annual increase in library collections causes space for bookshelves to decrease. As a result, space for reading has been gradually transformed into space for stacking data. It is necessary to introduce ways to maintain enough space for both reading and stacking data. One way includes movable compact shelving, which can partially replace existing fixed shelves.