• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.22 no.6
• /
• pp.15-25
• /
• 2019

Contamination of soil by deicing salt is among the important environment problems due to their toxicity and negative impact to human health and the environment. One of the effective methods for cleaning the soil from deicing salts is desalination using soil amendment-phytoremediation continuum treatment. The purpose of this study was to determine how much of the pH, EC control and Ca²⁺, Na⁺, Mg²⁺, and K⁺ taken up soil amendments and Miscanthus sinensis, and to evaluate the effect of salt reduction and growth improvement as affected by soil amendment in high concentration of calcium chloride (CaCl₂) deicing salts. Results indicated that the addition of soil amendments was decrease the EC and pH, also significantly reduce the leaching of Ca²⁺, Na⁺, Mg²⁺, K⁺, a chloride ions related deicing salts, compared to the control for CaCl₂ 10 g/L treatment. It also resulted in an enhanced plant growth and higher plant height, leaf length, leaf width, number of leaves, fresh weight and dry weight in Hydroball treatment + Miscanthus sinensis planting continuum treatment compared to the treatment that planted Miscanthus sinensis only. Therefore, we concluded that soil amendments might be attributed to an accumulation of deicing slats in the roadside soil, resulting in the improvement of Miscanthus sinensis growth.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.4
• /
• pp.249-255
• /
• 2015

Functional nanochannels were fabricated in order to control selective ion transportation with high permeability and low energy consumption. In this research, nanochannel platform fabrication process and surface functionalization process were developed. In addition, selective ion transportation and concentration measurement system was also set-up. By using fabricated multilayer metal membrane with electrical bias, 95% of ion ($Cl^-$) was blocked. This developed process is new-conceptional membrane fabrication technology and is expected to be applied to next-generation water purification/desalination, portable artifical kidney, and artificial sense organ.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.4
• /
• pp.227-238
• /
• 2013

The purpose of this study is to develop a process technology to produce high hardness drinking water which meet drinking water standard, remaining useful minerals like magnesium and calcium in the seawater desalination process while removing the sulfate ions and chloride ions. Seawater have been separated the concentrated seawater and desalted seawater by passing on Reverse Osmosis membrane (RO). Using Nano-filtration membrane (NF), We were prepared primary mineral concentrated water that sodium chloride were not removed. By the operation of electro-dialysis (ED) having ion exchange membrane, we were prepared concentrated mineral water (Mineral enriched desalted water) which the sodium chloride is removed. We have produced the high hardness water to meet the drinking water quality standards by diluting the mineral enriched desalted water with deionized water by RO. Reverse osmosis membranes (RO) can separate dissolved material and freshwater from seawater (deep seawater). The desalination water throughout the second reverse osmosis membrane was completely removed dissolved substances, which dissolved components was removed more than 99.9%, its the hardness concentration was 1 mg/L or less and its chloride concentration was 2.3 mg/L. Since the nano-filtration membrane pore size is $10^{-9}$ m, 50% of magnesium ions and calcium ions can not pass through the nano-filtration membrane, while more than 95% of sodium ions and chloride ions can pass through NF membrane. Nano-filtration membrane could be separated salt components like sodium ion and chloride ions and hardness ingredients like magnesium ions and calcium ions, but their separation was not perfect. Electric dialysis membrane system can be separated single charged ions (like sodium and chloride ions) and double charged ions (like magnesium and calcium ions) depending on its electrical conductivity. Above electrical conductivity 20mS/cm, hardness components (like magnesium and calcium ions) did not removed, on the other hand salt ingredients like sodium and chloride ions was removed continuously. Thus, we were able to concentrate hardness components (like magnesium and calcium ions) using nano-filtration membrane, also could be separated salts ingredients from the hardness concentration water using electrical dialysis membrane system. Finally, we were able to produce a highly concentrated mineral water removed chloride ions, which hardness concentration was 12,600 mg/L and chloride concentration was 2,446 mg/L. By diluting 10 times these high mineral water with secondary RO (Reverse Osmosis) desalination water, we could produce high mineral water suitable for drinking water standards, which chloride concentration was 244 mg/L at the same time hardness concentration 1,260 mg/L. Using the linked process with reverse osmosis (RO)/nano filteration (NF)/electric dialysis (ED), it could be concentrated hardness components like magnesium ions and calcium ions while at the same time removing salt ingredients like chloride ions and sodium ion without heating seawater. Thus, using only membrane as RO, NF and ED without heating seawater, it was possible to produce drinking water containing high hardness suitable for drinking water standard while reducing the energy required to evaporation.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.6
• /
• pp.755-764
• /
• 2016

Pressure retarded osmosis (PRO) processes can be implemented on a number of water types, using different technologies and achieving various power outcomes. In this study, Sewage facility effluent was used for feed solution of PRO and synthetic NaCl water for draw solution. This study was conducted to investigate effect of water quality of pretreatment on power density and flux decline in PRO process. The results show that organic and particulate foulants have to be removed for more stable operation. Flourescence technique with EEM enables to investigate the chemical properties of aquatic organic matter by extracting spectral information. Humic/fulvic matters and soluble microbial by-products were analyzed as the most affecting factors on the PRO performance. As a result of analyzing the whole system based on the energy consumption of the unit process, specific energy consumption(SEC) of the applicable technology for PRO pre-treatment should be about $0.2kWh/m^3$ or less.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.4
• /
• pp.1-13
• /
• 2018

The grain complex of Saemangeum is created for promoting the foundation of agriculture combined the global competitiveness. However, the masterplan is being also revised with changing of local conditions and social needs. Thus, the dynamic masterplan is needed to consider the change of time for Saemangeum project. The present study was made to set up the dynamic masterplan of Saemangeum grain complex for handling the change such as project progress, local environment, and project conditions flexibly. In this study, the dynamic masterplan for the progressive development of water supply, farmland composition, and introduction facilities is presented to the 6-2 zone in three stages. We believed that the water supply would be possible through the pumping and desalination facilities with the development stages. The farmland composition proceeded for each complex with reclamation, soil preparation, and soft soil processing. And it is planned to carry out crop cultivation from the complex where the construction is completed first. The introduction facilities were analyzed focusing on the silos and forage loading facilities, and the optimal location of them was selected using road and accessibility. The concept of dynamic masterplan may provide the direction for the planning and progress of reclamation project.

• Membrane Journal
• /
• v.34 no.1
• /
• pp.20-29
• /
• 2024

Membranes are increasingly used in a variety of applications including desalination, gas separation, disposable filters, and healthcare products. Recently, sustainable and green membrane fabrication technology is recognized as one of the decisive initiatives to reach the target of pollution control. Especially, the fabrication of bio-based membranes using such as poly lactic acid (PLA), polybutylene adipate terephthalate (PBAT), and polybutylene succinate (PBS) has attracted considerable attention. The phase inversion method is one of the versatile approaches for preparing PLA membranes. This article reviews the recent advances in PLA membrane preparation via the phase inversion method. Furthermore, it provides a perspective on the potential outlook for future advances. Overall, this review has demonstrated has been conducted in the area of bio-based PLA membranes.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.3
• /
• pp.52-62
• /
• 2008

By analyzing specific plant distributions and physicochemical characteristics of topsoil in a reclaimed dredging area, baseline data was found of natural landscape planting sites, and developing dredged fill ground. The reclaimed dredging area is five different stands (1, 2, 3, 4 and 5) which were examined in this research. They are located from sea level to 15 meters in altitude and exhibited typical characteristics of the salt marsh in Gwangyang Bay. Species with high constancy in the vegetation on the reclaimed soil were classified into four stages. A total of 12, 15, 22, 27 and 35 different plant species were found and also increased in stands 1, 2, 3, 4 and 5, respectively. Moving from stand 1 to 5, halophytes decreased and non-halophytes increased. Desalination at each stage of the reclaimed dredging area was a driving force affecting the performance and distribution of halophytes and non-halophytes. Overall, 35 quadrats of soil were selected and analyzed for specific physicochemical characteristics of topsoil between O${\sim}$20cm. Results of the physicochemical analysis such as altitude, slope, vegetation and kind of reclaimed dredging soil, exhibited irregular increases or decreases. As survey areas moved from stand 1 to 4, desalination areas, soil acidity, electric conductions, content of salinity, available phosphorus, potassium, chlorine, calcium, and magnesium indicated decreasing patterns; however, total nitrogen, silt, and clay content increased. Cluster analysis and PCA by environmental data within the stands clearly showed five distinct vegetation patterns on the tested reclaimed area. These results indicate that the differences of performance and distribution of vegetation are due to the SAR in the reclaimed soil and related to the natural survival strategy at the given hostile habitat.

• Membrane Journal
• /
• v.34 no.2
• /
• pp.87-95
• /
• 2024

Recent studies explore a wide array of desalination and water treatment methods, encompassing membrane processes such as reverse osmosis (RO), nanofiltration (NF), and electrodialysis (ED) to advanced capacitive deionization (CDI) and its membrane variant (MCDI). Comparative analyses reveal ED's cost-effectiveness in low-salinity scenarios, while hybrid systems (NF-MCDI, RO-NF-MCDI) show improved salt removal and energy efficiency. Novel ion separation methods (NF-CDI, NF-FCDI) offer enhanced efficacy and energy savings. These studies also highlight the efficiency of these methods in treating complex wastewater specific to various industries. Environmental impact assessments emphasize the need for sustainability in system selection. Additionally, the integration of microfabricated sensors into membranes allows real-time monitoring, advancing technology development. These studies underscore the variety and promise of emerging desalination and water treatment technologies. They provide valuable insights for enhancing efficiency, minimizing energy usage, tackling industry-specific issues, and innovating to surpass conventional method limitations. The future of sustainable water treatment appears bright, with continual advancements focused on improving efficiency, minimizing environmental impact, and ensuring adaptability across diverse applications.

• Journal of the Korean Electrochemical Society
• /
• v.18 no.1
• /
• pp.24-30
• /
• 2015

To desalinate the aqueous solutions with high salt concentration using the capacitive deionization technology, two resin/membrane capacitive deionization(RMCDI) cells were fabricated by filling mixed ion exchange resins in two different flow channels (spacer and spiral type). The salt removal efficiency of the spacer- and spiral-RMCDI was 77.21 and 99.94%, respectively. Many ions were significantly removed in a spiral RMCDI cell because the feed solution could be more evenly contacted with the ion exchange resins filled on the spiral type flow channel. As the result of the changes of pH and accumulative charges, it was observed that Faradaic reaction was diminished for a spiral RMCDI cell filled by the mixture of cation and anion exchange resins. Therefore, the desalination of the aqueous solutions with high salt concentration by the capacitive deionization technology was proven. In addition, further studies on the optimization of the mixing ratio with ion exchange resins and the introduction of the regeneration process generally occurred in the continuous electrodeionization (CEDI) technology are required to improve the RMCDI technology.

• Korean Chemical Engineering Research
• /
• v.52 no.2
• /
• pp.154-165
• /
• 2014

Development of unconventional natural resources such as shale gas, shale oil and coal bed methane, has been activated and improved the productivity due to the recent technology advance in horizontal drilling and hydraulic fracturing. However, the flowback water mixed with chemical additives, and the brine water containing oil, gas, high levels of salts and radioactive metals is produced during the gas production. Potential negative environmental impact due to large volumes of the produced wastewater is increasingly seen as the major obstacles to the unconventional natural resource development. In this study an integrated framework for the flowback and brine water treatment is proposed, and we reviewed the upcoming state of the art technology in water treatment. Basic separation processes which include not only membrane, evaporation, crystallization and desalination processes, but the potential water reuse and recycling techniques can be applied for the unconventional natural resource industry.