• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.309-313
• /
• 2000

In order to meet the industrial requirement, precision grinding with brush tool has been applied. To analyze the brush tool characteristics, several parameters including numbers of brush string installed in a single holder, depth of cut and brush length have been changed. Several data from various source were acquired using AE, acceleration and tool dynamometer during the process. Consistent results revealing certain trend with respect to each process condition were observed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.34-38
• /
• 1996

Cylindrical plunge grinding is widely used for final machining process of precision parts such as automobile, aircraft, measurement units. In order to make parts which have high precison accuracy and high surface integrity, it is neccessary to consider grinding characteristics. these grinding characteristics are closely related grinding force. Soin this study, to examine closely characteristics of grinding force, effects of dressing condition, depth of cut and speed ratio on grinding force are considered. As the result, It is shown that grinding forces are affected bydressing condition, depth of cut and speed ratio and that there exist threshod grinding force and it also affected by dressing conditon.

• 한국기계가공학회지
• /
• 제17권6호
• /
• pp.61-67
• /
• 2018

The face milling cutter, which is mainly used for the face milling, is used to cut the Carbon steel(SM20C) in the machining center for 5 times and 10 times respectively. This study clarify the dimensional accuracy characteristics according to the number of fine machining varied the condition of cutting depth, table feed speed and spindle speed. Cutting depth is varied 0.05~0.2mm, table feed speed is varied 0.05~0.2mm/min and spindle speed is varied 1500~2500rpm. As a result, the dimensional accuracy was stable 6 times machining with table feed speed 150mm/min and 10 times machining with table speed 100mm/min and cutting depth 0.05mm regardless times of machining.

• 대한기계학회논문집
• /
• 제10권6호
• /
• pp.807-813
• /
• 1986

본 연구에서는 국내에서 생산되고 있는 구상흑연주철을 이단으로 어니일링하 여 기타조직을 3가지(p$_{1}$:28.88% 페라이트, 63.5% 퍼얼라이트, p$_{2}$:49.7% 페 라이트, 42.2% 퍼얼라이트, p$_{3}$:71.26% 페라이트, 22.3% 퍼얼라이트)로 변화시켜 족삭에서 이차원절삭실험을 실시하여 기타조직에 따라 제절삭성(절삭력, 절삭비, 전단 각 및 침의 흐름속도)을 비교검토 하므로서 어니일링효과가 절삭성에 미치는 영향을 검토 연구하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 사면안정학술발표회
• /
• pp.65-81
• /
• 2003

During the last few decades in Korea, the development of hillside or mountain areas has rapidly increased for infrastructure construction such as railroads, highways and housing. Many landslides have occurred during these constructions. Also, the amount and scale of damage caused by landslides have increased every year. In the case of Far East Asia including Korea, the damage of landslides is consequently reported during the wet season. In this paper, the effect of stabilizing piles on slope stability is checked and the behavior of slope soil and piles are observed throughout the year by field measurements in the large-scale cut slopes. In particular a large-scale cut slope situated on the construction site for the express highway in Donghae, Korea. First of all, The behavior of the slope soil was measured by inclinometers during slope modification. Landslides occurred in this area due to the soil cutting for slope modification. The horizontal deformations of slope soil gradually increased and rapidly decreased at depth of sliding surface indicating that the depth of sliding surface below the ground surface can be predicted. On the basis of being able to predict the depth of the sliding surface, stabilizing piles were designed and constructed in this slope. To ensure the stability of the reinforced slope using stabilizing piles, an instrumentation system was installed. The maximum deflection of piles is measured at the pile head and it is noted that the piles deform like deflection on a cantilever beam. The maximum bending stress of piles is measured at the soil layer. The pile above the soil layer is subjected to lateral earth pressure due to driving force of the slope, while pile below soil layer is subjected to subgrade reaction against pile deflection. As a result of research, the effect and applicability of stabilizing piles in large-scale cut slopes could be confirmed sufficiently.

• 지질공학
• /
• 제31권4호
• /
• pp.533-540
• /
• 2021

비탈면 안전성과 밀접한 관련이 있는 내부 상태를 평가하는 방법으로 복합지구물리탐사와 지반의 밀도모델링을 수행하였다. 완전부게이상 분포로부터 풍화대의 규모와 신선한 기반암의 분포 위치를 확인할 수 있었다. 오일러 디콘볼루션 역산법으로 비탈면 중앙부의 신선한 기반암은 주변에 비해 10 m 정도 깊은 30 m 깊이에 분포하고 저밀도의 풍화대 두께가 증가한다. 이러한 경향은 전기비저항 분포에서 관찰되는 저비저항과 고비저항대의 깊이와 일치한다. 비탈면 지반의 밀도 모델은 암반의 차별풍화대의 분도와 유사하게 나타났으며 이러한 결과로부터 중력장 해석을 이용한 밀도 모델링이 비탈면의 내적인 상태변화와 안전성 해석에 활용될 수 있고 노출된 암반에서 풍화대의 형상을 파악하는 방법으로써 적합함을 시사한다.

• 한국결정성장학회지
• /
• 제23권4호
• /
• pp.173-179
• /
• 2013

다이아몬드는 원석의 형태가 불규칙하고 견고하더라도 보석으로 쉽게 가공될 수 있으며, 등급 평가에 영향력을 나타내는 테이블, 크라운, 퍼빌리언, 거들면을 정밀하게 측정하였다. Round Brilliant Cut Diamond의 표준 연마에 적합한 규격을 조사하였고, 통계적(95 %) 신뢰 구간으로 표준편차, 평균, 허용 오차를 검토하였다. 측정된 크기, 각도, 깊이, 두께의 변수들이 나타내는 분포에 따라, 커팅 등급의 빈도 분석과 프로포션을 비교하였다. 각 변수간의 상관관계와 프로포션에 나타난 영향력의 근거는 LSM(Least Square Method)을 적용한 회귀 분석으로 결정하였다. 본 논문에서, 다이아몬드의 테이블 크기와 퍼빌리언 깊이 퍼센트가 등급 결정에 많은 영향을 미치고, 특히, 퍼빌리언 깊이는 프로포션과 관련하는 주요 원인으로 광학 현상에도 작용함을 알 수 있었다.

• 동력기계공학회지
• /
• 제17권1호
• /
• pp.58-63
• /
• 2013

The aerodynamic performance of double inlet sirocco fan is strongly dependent upon the design factors of impeller and scroll. In this paper, the change of scroll size was adopted to investigate the aerodynamic performances of double inlet sirocco fan and indoor PAC. Especially, a scroll expansion angle and a cut-off clearance ratio were considered to change the scroll size. In addition, the installation depth between double inlet sirocco fan and indoor PAC was considered. As a result, the total pressure efficiency of double inlet sirocco fan shows about 62%~73% according to the change of scroll expansion angles. Moreover, the flowrate performance of indoor PAC is the best at the condition of a scroll expansion angle of 8°, an installation depth of 15 mm and a cut-off clearance ratio of 8%.

• ALGAE
• /
• 제29권3호
• /
• pp.183-195
• /
• 2014

There are recognized three new species of Polysiphonia sensu lato at a 10-20 m water depth from Jeju Island, Korea. We described the morphology of three new species and analyzed rbcL sequences to infer phylogenetic relationships among Polysiphonia sensu lato. Polysiphonia amplacapilli sp. nov. is characterized by an epiphytic, discoid holdfast, 5-7 pericentral cells, large trichoblasts, lateral branches connecting with trichoblasts, only slightly corticated in the basal parts, cut-off rhizoids and a spiral arrangement of tetrasporangia. Polysiphonia morroides sp. nov. is characterized by saxicolous, cut-off rhizoids, four pericentral cells, ecorticate, spiral arrangement of tetrasporangia, and it was collected at the fast-flowing water habitat in 20-25 m depth. Polysiphonia sabulosia sp. nov. is characterized by ecorticate, 5-6 pericentral cells, a single filamentous trichoblast, lateral branches connecting with the trichoblasts, cut-off rhizoids, and spiral arrangement of tetrasporangia, and is growing in the sandy locations. The phylogenetic analysis of rbcL sequences demonstrated that three new species are clearly distinguished from other species of Polysiphonia sensu lato.

• Transactions on Electrical and Electronic Materials
• /
• 제18권6호
• /
• pp.341-344
• /
• 2017

Infrared (IR) filters were developed to implement integrated three-dimensional (3D) image sensors that are capable of obtaining both color image and depth information at the same time. The combination of light filters applicable to the 3D image sensor is composed of a modified IR cut filter mounted on the objective lens module and on-chip filters such as IR pass filters and color filters. The IR cut filters were fabricated by inorganic $SiO_2/TiO_2$ multilayered thin-film deposition using RF magnetron sputtering. On-chip IR pass filters were synthetized by dissolving various pigments and dyes in organic solvents and by subsequent patterning with photolithography. The fabrication process of the filters is fairly compatible with the complementary metal oxide semiconductor (CMOS) process. Thus, the IR cut filter and IR pass filter combined with conventional color filters are considered successfully applicable to 3D image sensors.