• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2000년도 학술발표회 발표논문집
• /
• pp.108-113
• /
• 2000

A field study was performed to investigate the effect of water saving irrigation method on water use efficiency and rice yield. The field plot was 40a (40 ${\times}$ 100m) in size and located at Buryangmyun, Kimjae city, Chonbuk province. Field measurements were made during the growing seasons, May to September of the year 1998 and 1990. Irrigation water volume, drainage water volume, rainfall and ponding depth were measured. Irrigation water management practice employed was such that to keep the ponding depth about 3 to 4cm by intermittent irrigation with drying the soil surface until hair cracks emerge before the next irrigation. The amounts of water volume irrigated and drained were measured by pipe flow meter and ponding depth was observed by using a partly buried 120mm diameter PVC pipe. The results showed that the irrigation water depths, the rainfalls, and the drainage depths were 379mm, 458mm, and 448mm in 1988, and 274mm, 819mm, and 736mm in 1990, respectively. The average yield was 590kg per 10a. The water saving irrigation method saved irrigation water by about 20% with higher yield compared with the traditional method.

• 한국컴퓨터그래픽스학회논문지
• /
• 제24권5호
• /
• pp.1-10
• /
• 2018

본 논문에서는 피사계 심도(DoF, Depth of field)가 포함된 사진을 자동으로 추상화 시켜주는 비 사실적 렌더링(NPR, Non-photorealistic rendering) 기술을 제안한다. 우리의 접근 방식은 RGB 채널을 이용하여 DoF 영역을 효율적으로 분류하고, DoF 크기에 따라 색상을 추상화하며, 라인의 두께를 자동으로 조절함으로 새롭게 필터링 하는 기술이다. DoF기반 필터링 방식은 성능과 디자인 관점에서 추상화의 품질을 크게 개선시켰으며, 간단하고 빨라 구현하기 쉽고, 사진으로부터 추상화나 일러스트레이션을 제작할 때 원본 사진이 갖고 있는 DoF의 특징과 스타일을 효율적으로 잘 표현한다.

• 한국농공학회지
• /
• 제39권2호
• /
• pp.134-142
• /
• 1997

This study was performed to evaluate the drain runoff characteristics from one paddy field, and to provide the basic data required for the determination of flood discharge and unit drainage water for drainage improvement and farmland consolidation. For this purpose, under the assumption that drain discharge from paddy field was similar to outflow of reservoir, runoff model based on storage equation was applied to the experimental field, and simulated results were compared to the measured discharge at weir point. To estimate effective storage volume of paddy field with water depth, 4 regression formula were examined such as linear, exponential, power, and combined. From the observed runoff characteristics, it was shown to be 3.3~16.3${\ell}$/sec in weir discharge, 57.2~98% in runoff ratio, and relative error of simulated result was 3.0~39.4%, 8.5 ~56.0 % for peak flow and runoff ratio, respectively. Curve number by SCS method was calculated as mean value of 96.4 using measured rainfall and runoff data, it was considered relatively high because paddy field has generally flooding depth contrary to the upland watershed area.

• Journal of Biosystems Engineering
• /
• 제38권4호
• /
• pp.240-247
• /
• 2013

Purpose: This study was conducted to develop a rubber-crawler type vehicle as a traveling device for harvesting water-dropwort cultivated in water contained paddy rice field in winter season. Methods: A commercial rubber-crawler type vehicle was used to investigate application of rubber crawler to the paddy rice field as preliminary test. As the result of the preliminary test, a both prototype traveling device with rubber crawlers for a water-dropwort harvest was designed with inclination of $45^{\circ}$ at the front-end and rear-end of crawler under the basic water depth of 0.6 m in the paddy rice field. The device was fabricated and attached to the experimental harvesting test devices on the front of the prototype vehicle. The size of the prototype crawler vehicle with a harvesting part is $2,800{\times}1,460{\times}1,040 $ (mm) ($L{\times}W{\times}H$) with weight of 9.21 kN (maximum). Sizes of the crawler of prototype vehicle are ground contact length of 900 mm, width of 180 mm, height of 1,070 mm and distance between center to center of crawlers of 720 mm. The side-overturn angle of the prototype was $26.4^{\circ}$. Results: Driving performance of the prototype vehicle in water contained paddy field were good at both forward and reverse (backward) directions as weights were applied. The drawbar pull and the maximum sinking depth of the prototype vehicle were 3.5 kN and 0.13 m respectively at water depth of 0.5 m, when the weight and bearing capacity of the prototype rubber crawler in the paddy field were 8.51 kN and 26.3 $kN/m^2$, respectively. Conclusions: Results of the driving test performance of the prototype crawler in paddy rice field at the water depth of 0.5 m were satisfactory. The prototype had enough drawbar pull and driving ability in the deep water contained paddy field.

• Geomechanics and Engineering
• /
• 제29권5호
• /
• pp.583-598
• /
• 2022

The Compaction effect is important for evaluating the subgrade construction. However, there is little research exploring the compaction quality of deep soil using hydraulic compaction. According to reinforcement effect analysis, dimensional analysis is adopted in this work to analyze subgrade compactness within the effective reinforcement depth, and a prediction model is obtained. A hydraulic compactor is then employed to carry out an in-situ reinforcement test on gravel soil subgrade, and the subgrade parameters before and after reinforcement are analyzed. Results show that a reinforcement difference exists inside the subgrade, and the effective reinforcement depth is defined as increasing compactness to 90% in the depth direction. Layered compactness within the effective reinforcement depth is expressed by parameters including the drop distance of the rammer, peak acceleration, tamping times, subgrade settlement, and properties of rammer and filler. Finally, a field test is conducted to verify the results.

• 한국농공학회논문집
• /
• 제46권4호
• /
• pp.13-21
• /
• 2004

The purpose of this study was to investigate tile effects of pending depth treatment on water balance in paddy fields. Field experiment was performed in an experimental farm in Taegu, southern part of Korea during the rice growing season In 2001, 2002 and 2003. Experimental plots were three 8m ${\times}$ 80m rectangular plots. Three pending depth treatments, very shallow, shallow, and deep were used. Daily values of water balance components were measured in the field. The irrigation amounts measured at the experimental plots showed that the very shallow and the shallow ponded plots required smaller amount than the deep ponded plot. The shallow ponded plot saved irrigation water about 17.7% compared with the traditional deep ponded plot in 2001 The very shallow ponded plot saved irrigation water about 25.7% compared with the traditional deep ponded Plot in 2002, The shallow ponded plot saved irrigation water about 18% compared with the deep ponded plot in 2003.

• 한국의학물리학회지:의학물리
• /
• 제1권1호
• /
• pp.91-95
• /
• 1990

The solid state detector system was constructed using commercially available rectifier diode for the assessment of quality assurance in radiotherapy. Dosimetry system which consists of the electrometer and the water phanton was used for measuring small field size scanning. The measured results, which had linearity in accordance with variation of radiation dose for gamma-ray of Co- 60 and 6 and 10MV photons of linear accelerator, showed quite linear characteristics within 1% error. The percent depth dose of 10MV photon of Mevatron KD linear accelerator was measured in small field size using diode, and the results were compared with that of using ion chambers. The results show that the difference of percent depth dose between the value of diode and that of ion chamber was negligible in large field size. However, in small size less than 4$\times$4cm, the difference of percent depth dose estimated by diode and ion chamber was 4.7% by extrapolation to 0$\times$0cm. Considering the smaller volume of diode than that of ion chamber, it might be more reliable to use diode for estimating percent depth dose. Above results suggest that diode can be used for routine check such as beam profile, flatness, symmetry and energy

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.231-236
• /
• 2000

In order to predict depth of the pile forward modeling and inversion of magnetic logging data was conducted by using a finite line of dipoles model. The horizontal component as well as the vertical component of magnetic fields can be measured in the borehole, and the magnetic anomalies can be obtained by subtracting the Earth's magnetic field from the measurement. The magnetic anomalies of the pile are considered as vector sum of induced magnetization due to the Earth's magnetic field and remnant magnetization possessed by steel strings in the pile. The magnetic anomalies are used as input data for inversion from which the length, the magnetic moment per unit length, and the dip angle of the pile can be obtained. From the inversion of synthetic noisy data, and the data obtained from the field model test it is found that the driving depth of the pile can be determined as close to the order of measuring interval (5∼10㎝). It is also found that the resultant magnetic anomalies due to an individual steel string in the pile are almost same as those due to a group of steel strings located at the center of the pile. The magnetic logging method also can be used for locating reinforced bars, pipes, and steel casings.

• 한국의학물리학회지:의학물리
• /
• 제3권2호
• /
• pp.13-22
• /
• 1992

쐐기 인자의 깊이 의존성 연구를 통하여 적절한 쐐기 인자 결정 깊이에 관한 연구를 하였다. 4 MV, 6MV, 10MV, 15MV (사용가속기 Varian, Siemens, Mitsubishi) 선종에 대하여 명목 쐐기 각도 15$^{\circ}$, 30$^{\circ}$, 45$^{\circ}$, 60$^{\circ}$, 쐐기를 사용하여, 깊이 변화에 따르는 쐐기 인자 변화를 살펴보았다. 적정 쐐기 인자 결정 깊이를 알아보기 위하여 서울중앙병원, 부산침례병원, 원주기독병원에서 1990. 1991. 12 사이에 쐐기를 이용하여 방사선 치료를 받은 환자중 무작위로 614명을 추출하여 사용 에너지별, 쐐기 각도별, 치료 깊이별 분석을 시도하였다. 전체 환자의 60% 이상이 8cm$\pm$2.5cm 깊이에서 치료를 받았다. 쐐기 인자를 선량 최대 깊이로 결정할 경우 모든 환자가 평균 2%(최대 4%)의 치료 오차를 갖게 된다. 그러나 8cm깊이를 쐐기 인자 결정 깊이로 할 경우 평균 0.5% 선량 오차 이내로(사용가속기 기종, 에너지, 쐐기 각도에 관계 없이 최대 오차 1.7% 이내) 정확한 치료를 받을 수 있음을 알았다. 따라서 쐐기 인자는 5-10cm(8cm) 깊이에서 결정되는 것이 합리적인 것을 알았다.

• 대한기계학회논문집
• /
• 제18권3호
• /
• pp.529-539
• /
• 1994

In laser heat treatment process of steels, the thin layer of substrate is rapidly heated to the austenitizing temperature and subsequently cooled at a very fast rate due to the self-quenching effect. Consequently, it is transformed to martensitic structure which has low magnetic permeability. This observation facilitates the use of a sensor measuring the change of electromagnetic field induced by the hardening layer. In this paper, the eddy-current electromagnetic field is analyzed by a finite element method. The purpose of this analysis is to investigate how the electrical impedance of the sensor's sensing coil varies with the change in permeability. To achieve this, a numerical model is formulated, taking into consideration the hardening depth, distance of the sensor from the hardened surface and the frequency driving the sensor. The results obtained by numerical simulation show that the eddy-current measurement method can feasibly be used to measure the changing hardening depth within the frequency range from 10 kHz to 50 kHz.