• Journal of the Korean Vacuum Society
• /
• v.12 no.3
• /
• pp.162-167
• /
• 2003

To find the concentration according to the depth-direction of ions implanted in the sample, with sputtering of the sample surface, one needs the depth profiling of ion implanted in the sample. On measuring of depth profiling, the sputtering rate to affect depth direction, is calculated by SRIM simulation. When ion is implanted in the sample, the atomic density of the sample rises up a little, and it alters sputtering yield. This alteration then causes differences of sputtering rate to affect depth-direction, on measuring of depth profiling. With the usage of SRIM Monte Carlo simulation code, one calculates sputtering rate, with sputtering yield by the alteration of atomic density of the sample through ion implantation. As a result, it goes to prove that its difference affects depth distribution, on measuring of depth profiling.

• Journal of the Korean Society of Earth Science Education
• /
• v.5 no.1
• /
• pp.88-94
• /
• 2012

This study was created to resolve the problems embedded in the formal measuring experiments to determine the earth's size in the current curriculum, to develop an updated measuring experiment to determine the earth's size and to establish its effect. For this study, pre-service elementary teachers, who had attempted the experiment of measuring the size of the earth when they were in middle school, performed the experiments in the existing national curriculum, and their responses, collected through in-depth interviews, were examined. To begin with, the pre-service elementary teachers conducted the experiment of measuring the earth size and they recorded the problems while performing it. At the end, an in-depth interview was administered. Based on the problems, an updated measuring experiment to determine the earth's size was suggested to be applied to the same contents and be analyzed through the in-depth interviews. Common themes which were mutually categorized and analyzed by the two researchers were obtained based on the records produced while conducting the experiment and the in-depth interview data. The teachers mentioned that the experiments for measuring the size of the earth in the current curriculum gave rise to difficulties in measuring precisely the angles between the string and the post. Also, there has been a scientific contradiction that solar altitudes were increased in a high latitude region, instead of decreased. For this reason, an alternative method has been developed to measure the earth's size using the distance and the solar altitude difference of two places. The teachers all agreed that by using the updated measuring experiment, they can acquire more precise measurements and it is easier, faster and consequently more effective than the existing methods. Through the results of this study, I suggest that the newly developed experiment by the researchers can overhaul the problems of the current experiments and it can be an effective alternative to the current experiment.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.9
• /
• pp.976-981
• /
• 2009

MEMS capacitive gap sensor is developed for measuring abrasion depth of gun barrel rifling. Measuring abrasion depth of gun barrel rifling is very important because it is related with exactness of firing and life of arms. The method using a gap sensor is not to hurt rifling. And it can measure abrasion depth through minimum shooting, because the developed gap sensor can measure from $1{\mu}m{\sim}12{\mu}m$ using Polydimethylsiloxane(PDMS) material and making a stretchable electrode on PDMS. And it's resolution is 1 ${\mu}m$ using capacitive method and MEMS technology.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.162-163
• /
• 2021

Currently, the depth of cracks is measured using ultrasonic detectors in maintenance practice. This method consists of measuring the depth of cracks by attaching ultrasonic depth measuring equipment to the concrete surface, and there are restrictions on the timing and location of the inspection. These limitations can be addressed through the development of image-based crack depth measurement AI technology. If crack depth measurements are made based on images, restrictions on the timing and location of inspections can be lifted because images acquired with simple filming equipment can be used as input information. To efficiently develop these artificial intelligence technologies, it is essential to identify the interrelationship between crack depth measurements and image characteristic information. Thus, this study is a basic study of the development of image-based crack depth measurement AI technology and aims to identify image characteristic information related to crack depth.

• Journal of Welding and Joining
• /
• v.20 no.1
• /
• pp.69-75
• /
• 2002

This study investigated the effect of the system parameters on penetration depth measurement using infrared temperature sensing system. The distance from focusing lens to detector was varied to diminish the error in measuring weld bead width. The effect of bead surface shape on measured surface temperature profile was evaluated using specimen heated by electric resistance. The measuring distance from laser beam was changed to optimize the measuring point. The results indicated that the monitoring device of surface temperature using infrared detector array was applicable to real time penetration depth control.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.124-129
• /
• 1998

The ultrasonic pulse measurements can be used to detect the development of cracks in concrete structures and to check deterioration due to frost or chemical action. An estimate of the depth of a visible crack at the surface can be obtained by measuring the transit times that across the crack for two different arrangements of the transducers placed on the surface. In this paper, the concrete cracks that artificially introduced crack of width 1, 2mm and depth 20, 40, 60, 80mm were measured by Tc-To, Direct and Indirect Method. The test results indicate that the Tc-To Method is the most useful in measuring crack of concrete structures. And the crack depth calculated by the Direct and Indirect Method is shown bigger than artificially introduced real crack depth.

• Journal of Korean Dental Hygiene Science
• /
• v.5 no.2
• /
• pp.13-24
• /
• 2022

Background: This study was aimed at investigating the perception of the requirement of measuring the periodontal pocket depth of the dental hygiene students in the mock national board examination. Methods: SPSS 25.0 (IBM SPSS Statistics) was used to perform the independent t-test for the recognition level of dental hygiene students in the interdisciplinary practical national board examination. A p-value < 0.05 was set to indicate statistical significance. Results: Participants showed a high recognition level for the requirement of measuring the periodontal pocket depth without any difference among disciplines. When periodontal pocket depth measurement was included in the national board examination, the educational and clinical work of dental hygienists was expected to be unified, and the professionalism of dental hygienists was expected to be strengthened. Conclusion: The results of this study suggest that the feasibility of introducing periodontal pocket depth measurement in the practical national board examination for dental hygienists should be reviewed by a group of experts.

• Journal of Korea Multimedia Society
• /
• v.16 no.9
• /
• pp.1109-1118
• /
• 2013

Recently, stereoscopic three-dimensional(S3D) movie and video are becoming globally popular. However, there are some people who could not perceive 3D depth information well. Traditional stereopsia test tools could not analyze the subject's perceived depth accurately. Therefore, it is necessary to have a test tool that accurately measures the degree of perceived depth of subjects. In this paper, we suggested a 3D content depth measuring instrument and produced suitable 3D contents for the instrument. We measured subjects' perceived depth of 3D foreground objects in terms of $+1^{\circ}$, $-1^{\circ}$, $-2^{\circ}$ binocular disparity and compared the measured values with the theoretical values. Measured values were slightly bigger than the theoretical values. Deviation between the measured values and theoretical values increased with extrusion distances.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.4
• /
• pp.409-417
• /
• 2005

This study is aimed to develop a remote control robot-ship system using wireless communication and DGPS, which it is an automatic system for measuring exact depth and bed topography of reservoir or dam. Robot-ship is equipped with GPS and echosounder, and it is controled remotely using wireless internet. Robot-ship is consist of frame, each module and control board. Control segment is consisted of a processing system for positioning data and remote control system. A wireless communication system is developed which can communicate interactively between robot-ship and control segment, and it is developed in two channel system of RF modem and wireless internet. The robot-ship could be used acquire economically and exactly the water depth and bed topography of reservoirs, dams, rivers and so on.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.1 s.39
• /
• pp.55-59
• /
• 2007

This study is aimed to acquire the depth information and measure the water volume of reservoir using the robot-ship equipped with GPS and echosounder. Robot-ship is an automatic system for measuring exact depth and bed topography. According to field experiment results, measured water volume by the robot-ship data was not much exceeding 6.8% in comparison with existing water volume data, and it was guessed because of sediments of reservoir bottom. The robot-ship could be used to acquire economically and exactly the water depth and bed topography of reservoirs, dams, rivers and so on.