• Journal of Technologic Dentistry
• /
• v.29 no.1
• /
• pp.133-138
• /
• 2007

In this study, the castability and of commercially pure titanium(c.p.Ti) grade according to the casting condition which are the vacuum condition in casting machine and mold temperature of investment, was investigated. Argon-arc melt/centrifugal casting machine was used for casting the specimens. The microstructure and mechanical properties were evaluated by using optical microscope. The results were as follows; 1. It could make a sure that there's relatively not much defect of casting body of c.p.Ti according to the deference of air pressure. 2. It could make sure that it formed porosity on the surface inside of the casting body of c.p.Ti according to deferent temperature. and on excellent castability was below $200^{\circ}C$ 3. As the mold temperature of investment was increased, the lamellar structure of phase and coarse grains were shown, especially under 42MPa.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.8
• /
• pp.2150-2156
• /
• 2009

The effects of MgO and coloring agents on the physical properties and color of zirconia based ceramics with glass frit were studied. The addition of MgO was effective on the coloring of zirconia-20wt% glass frit system. Major factor on the coloring was turned out to be sintering temperature. Coloring agents was turned out to be more effective than the addition of MgO on the coloring of zirconia base ceramics. Specimen without glass frit showed drastic change in color, while specimen with 20wt% glass frit revealed a limited change in color. This means that the addition of glass frit suppresses the coloring of zirconia based ceramics. The effect of sintering temperature on coloring revealed little change in color.

• Journal of Korean society of Dental Hygiene
• /
• v.1 no.2
• /
• pp.181-192
• /
• 2001

The purpose of this was to evaluate the level of knowledge about Hepatitis B and AIDS among dental hygiene students at six dental hygiene educational programs in nationwide, compare the findings to those of Song's study. 1703 dental hygiene students surveyed by mail and answered a questionnaire, using the questionnaire used developed by DiClemente el al., on Hepatitis B vaccination, antibody production, experience of unintentional needle stick injuries, experience of surgical operation and blood transfusion, personal risk factors for HBV and HIV, management of HBV and HIV postexposure management et al. The data indicated that dental hygiene students (79.0%) in this study had more HIV vaccination than dental hygiene(74.3%) in Song's study. As for recognition of antibody production after Hepatitis B vaccination, only 34.6% of respondents answered they knew having antibody production and 95% of respondents knew not having antibody production. Over one-half of the respondents (55%) answered they didn't even recognize having antibody production. 52.3 percent of dental hygiene students experienced unintentional needle stick injuries. The findings on the knowledge about Hepatitis B and AIDS were that dental hygienists (76.5 points) received higher mean score than those of dental hygiene students (71.0 points) and that the distribution of right answer rate also showed wider range in dental hygiene students (27.7~97.5%) than those of dental hygienist (41.2~99.5%). There were no statistical differences among dental hygiene education programs. Finding of this study support that the curriculum of dental hygiene program should include instruction on sources and methods of transmission of infectious diseases, risk of virus transmission in the workplace and principles of infection control. Furthermore, infection-control practices should be utilized routinely and their application to dental personnel, management of HBV and HIV postexposure management. Furthermore, for preventing the further spread of infectious diseases (HBV, HIV and AIDS${\cdots}$) caused by bloodborne viruses, imposing an obligation rather than recommendation on Hepatitis B vaccination to all dental personnel and routinely utilizing infection-control guidelines for all dental patients in dental practices (include dental educational programs) should be accomplished by coordination the government agency.

• Journal of Technologic Dentistry
• /
• v.12 no.1
• /
• pp.15-21
• /
• 1990

This research was to investigate and study on 92 Dental Technicians who had had some experience of working or being employed at dental craft-shops or craft-rooms in Seoul area and had transferred to other types of occupation, with regard to their reasons for changing their profession. For an approach to the study, some questionnaires and interview including 3 aspects of in quiriesmental, economic and social backgrounds-were administered, and major findings are as follows ; 1. The ages in which transferring to other kinds of job happened occurred mostly from 20 to 30(78.26%) an a group of subjects whose ages ranged from 20 to 30 years old. And, with regard to their experience of working or being employed at dental craft-shops or craftrooms, the transfer of their profession to the other kinds mosty happened in a group of subjects(94.56%) whose experience of working in the dental field is less than 4 years. 2. The reason of transfer with reference to the mental background was mostly mattered in a group that expressed "Excessive Work Duties"(34.78%), and most lowly mattered in a group of subjets who had "Certain Relations with Dentists"(8.70%). Thus, it appeared that the biggest reason of transfer by the mental background was, due to the excessive duty work, not to have Sufficient time to be usualized by dental technicians for their own purpose. 3. With reference to the economical background, a group that declared there was "No Wage Standards in Ratio to Their Labor" was the most in the separation rate as shown 45.56%. And, a group suspecting "No Guarantee for Their Living after Retirement" Showed a separation rate, 9.78%. In other words, the reason for transfer was that they did not receive due wage according to their amount of labor. 4. With reference to the social background, a group making a subject for no good working environments or conditions had a separation rate, 41.30%, which was the most among others, and a group with a subject of "The Rarity of Employment because of Excessive Supply of Dental Technicians" had the rate, 10.87%, which was the lowest. This meant that the major cause of transfer by the social background was a phenomenon for dental technicans to escape from unclean working places.

• Journal of Technologic Dentistry
• /
• v.32 no.4
• /
• pp.369-386
• /
• 2010

Purpose: This study aims to present practical data available for the effective health management and improvement for the dental technicians by exploring the interrelationships between general characteristics of dental technicians and seven health related habits like drinking, smoking, breakfast, and snacks among the others(alameda 7). Methods: Out of the random selection of the registered dental offices of Dental Technicians Association of Korea, 2,000 working dental technicians were asked to fill out the questionnaire from January 19 to April 30, 2009. We collected the 1,502 sheets of the questionnaire and took frequency analysis, crosstabulation, t-test, and analysis of variance using SPSS Win 12.0 program. Results: Among the seven health related habits, 54.9% of the subject answered 'never do exercise' in the question of exercise habits, which is the most problematic of all. Hours of sleep and BMI were found to be quite low. Of the general characteristics, sex proved statistically significant to all the seven habits(p<.001). Marital status, job title, and health check-up showed statistical significance in six items among the seven habits. Age, monthly income, job position showed statistical meanings in five items among the seven habits. The frequency of break showed statistical significance in four items among the seven habits. Working environment showed statistical significance only in the item of hours of sleep among the seven habits(p<.05). Conclusion: This study proved that it is vital to educate the dental technicians to learn the right habits for enhancing their health and quality of life and motivate them to practice those habits.

• Journal of Technologic Dentistry
• /
• v.24 no.1
• /
• pp.73-81
• /
• 2002

Accurate acquisition of surface geometries such as machined surfaces, biological surfaces, and deformed parts have been very important technique in scientific study and engineering, expecially for system design, manufacturing and inspection. Two camera method is relatively simple with an acceptable accuracy. In this paper, a new method is studied to acquire 3D geometric data of the small object such as a die in stone model. When the devices, cameras, laser beam and object are in a perfect plane, the calculation becomes very simple with less error. But this paper shows that arbitrarily positioned system can also be used to obtain 3D data.

• Journal of Technologic Dentistry
• /
• v.34 no.4
• /
• pp.369-377
• /
• 2012

Purpose: The aim of study was to compare the dimensional stability of digitized dental stone replica using different color of gypsum materials using a white light scanner with three-dimensional software. Methods: A master model(500B-1, Nissin dental product, Japan) with the prepared lower full arch tooth was used. Several type IV stones(white, yellow, green) were used for 30 stone casts(10 casts each) duplicated a master model of mandible. The master model and the replicas were digitized with the non-contacting white light scanner to create 3-dimensional digital models. The linear distance between the reference points were measured and analyzed on the Delcam Copycad$^{(R)}$(Delcam plc, UK) 3D graphic software. One-way analysis of variance(ANOVA) combined with a Tukey multiple-range test were used to analysis the data(${\alpha}$=0.05). Results: There were considerable differences in mean values between gypsum materials within each color(white, yellow, green), and this difference was statistically significant, p=0.001. Conclusion: Digitization of dental materials on optical scanner was affected by color. Three different color of gypsum materials showed clinically acceptable accuracies of full arch digital model produced by them. Besides, these results will have to be confirmed in further clinical studies.

• Journal of the Korean Dietetic Association
• /
• v.16 no.1
• /
• pp.22-38
• /
• 2010

In Korea, there has been a rapid increase in the number and proportion of elderly people, especially in rural areas, due to improvements in the standard of living and medical technology. One of the main health problems for the elderly people is dental health, which can cause nutritional and health problems. Thus, in this study, the dental health status and health status in relation to nutritional intake were analyzed. A total of 155 rural-dwelling elderly people (68 males, 87 females) over the ages of 65 participated in this study. The subjects were classified into three groups; the no denture no teeth group, denture user group, and natural teeth group. The dietary intake, biochemical health status, and anthropometry were evaluated. Can-pro 3.0 was used to assess dietary intakes and the SPSS 12.0 program was used for statistical analysis. The results showed that the natural teeth group had better nutritional and dietary intake status than the no denture no teeth group. The dietary assessment showed that there were differences in food intakes among the groups, which depended on their dental health status. In conclusion, dietary management is required for the elderly since each group has a different ability to chew food depending on their dental health status. In addition, the elderly will need different therapeutic diets because of the high prevalence of chronic degenerative diseases.

• Journal of Technologic Dentistry
• /
• v.24 no.1
• /
• pp.127-138
• /
• 2002

There are some cases that dental prosthesis does not operate as properly as expected in oral mouth. The reasons are such as a distortion of the mandibular, a fault of impression taking system or an extrusion of remaining teeth. One of dental prostheses to consider in the situations is the attachment which connects segment bridge. Active discussions are managed on theoretical side of this field but few on clinical side of it, which must be considered first. Accordingly I'd like to suggest a theoretical background for connect attachment of fixed segmented bridge. 1. As a bridge gets longer, burden on dental ligament is increased and the hardness of a bridge is lessened. 2. The flexibility of a bridge increases in ratio to 3 multiplication of the length and decreases in ratio to 3 multiplication of the width of occlusal surface and base of pontic. 3. Precision rest is needed to cope with the shake of teeth and the difference of axis direction among abutments. 4. Female part of the precision rest should be on middle abutment distal and male one on mesial of pontic. 5. Segmented attachment can be efficiently used to cope with long span bridgework and also in case that one piece casting can't be done because of slant of abutment.

• Journal of Technologic Dentistry
• /
• v.21 no.1
• /
• pp.131-138
• /
• 1999

As a society has developed, much concern has been put on appearances of people with development of economy. Accordingly malocclusion patients have been increasing. With this trend, it has become very important to investigate patients characteristics so as to cure the patients effectively. This study investigated 724 malocclusion patients who had been examined diagmosed and recorded well at Chong-a Dental Hospital for 5 years from 1994 to 1998. The results are as follows ; 1) The total number of orthodontic patients in 1998 increased about 79% than in 1994, and female orthodontic patients(68.1%) were more than male ones(31.9%). 2) Age distribution has shown more than 19 year-old group being the largest(48.9%) 3) Distributions in the types of malocclusion according to the Angle's classification have shown 42.5% for class I division, 21.5% for class II division, 35.9% for class III division, being class I division the largest. 4) 50.1% of the total patients were from Kang-nam Gu, So-cho Gu, and Song-pa Gu.