• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2008.10a
• /
• pp.129-130
• /
• 2008

• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.1
• /
• pp.101-112
• /
• 1996

Dry and wet deposition is an impertant removal mechanism of the amobient aerosol in the atmospheric environment. Since the deposition flut provides adverse impacts on various encironmental media including aquatic and ecological system as well as human health, it is essential to quantitatively estimate the removal fluxes of many air pollutants. Thus, the purposes of this experimental study are to investigate seasonal deposition flux variations of the total dustfall and various inorganic elements in the local ambient air and then to finally estimate their dry deposition velocities. To perform the study, the total of 90 dustfall samples were collected from January, 1994 thru February, 1995 in 5 different cities of Korea including Seoul, Suwon, Daejon, Kwangju, and Kangrung. Each sample was analyzed by an AAS and an ICP to determine the quantities of the 11 inorganic elements, such as Zn, Cd, Cr, K, Na, Pb, Ca, Fe, Mn, Mi, and Cu. As results, deposition fluxes, soluble/insoluble fractions, and deposition velocities for each element were extensively investigated. The resulting dry deposition velocities of some elements in Suwon were estimated by ranges of 0.57 .sim. 0.87 cm/sec for Zn, 0.35 .sim. 0.45 cm/sec for Pb, 1.25 .sim. 3.52 cm/sec for Ca, 0.21 .sim. 0.48 cm/sec for Fe, 0.95 .sim. 9.31 cm/sec for Mn, and 2.08 cm/sec for Cu.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.1
• /
• pp.178-190
• /
• 1999

This study was conducted to develop a simulation model for the growth dynamics of pigs and to describe quantitatively protein deposition depending on the amino acid composition of feed protein. In the model it is assumed that the essential processes that determine the utilization of feed protein in the whole body are protein synthesis, breakdown of protein, and oxidation of amino acid. Besides, it is also assumed that occurrence of protein deposition depends on genetic potential and amino acid composition of feed protein. The genetic potential for the protein deposition is the maximum capacity of protein synthesis, being dependent on the protein mass of the whole body. To describe the effect of amino acid composition of feed on the protein deposition, a factor, which consist of ten amino acid functions and lie between 0 and 1, is introduced. Accordingly a model was developed, which is described with 15 flux equations and 11 differential equations and is composed of two compartments. The model describes non linear structure of the protein utilization system of an organism, which is in non steady state. The objective function for the simulation was protein deposition(g/day) cal culated according to the empirical model, PAF(product of amino acid functions) of Menke. The mean of relative difference between the simulated protein deposition and PAF calculated values, lied in a range of 11.8%. The simulated protein synthesis and breakdown rates(g/day) in the whole body showed a parallel behavior in the course of growth.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.8
• /
• pp.56-63
• /
• 2020

The heat transfer phenomenon in the vicinity of the irradiated region of a focused laser beam of a DMT process greatly affects both the deposition characteristics of powders on a substrate and the properties of the deposited region. The goal of this paper is to investigate the heat transfer characteristics of a single bead deposition of Inconel 718 powders on S45C structural steel using a laser-aided direct metal tooling (DMT) process. The finite element analysis (FEA) model with a Gaussian volumetric heat flux is developed to simulate a three-dimensional transient heat transfer phenomenon. The cross-section of the bead for the FEA is estimated with an equivalent area method using experimental results. Through the comparison of the results of the experiments and those of the analysis, the effective beam radius of the bottom region of the volumetric heat flux and the efficiency of the heat flux model for different powers and travel speeds of the laser are predicted. From the results of the FEA, the influence of the power and the travel speed of the laser on the creation of a steady-state heat transfer region and the formation of the heat-affected zone (HAZ) in the substrate are investigated.

• Asian Journal of Atmospheric Environment
• /
• v.2 no.2
• /
• pp.81-89
• /
• 2008

The numerical simulation of wind and ozone ($O_3$) transport in mountainous regions was performed with a computational fluid dynamics technique. A dry deposition model for $O_3$ was designed to estimate $O_3$ deposition in complex terrain, and the qualitative validity of the predicted $O_3$ concentration field was confirmed by comparison with observed data collected with passive samplers. The simulation revealed that wind velocity increases around ridge lines and peaks of mountains. The areas with strong wind corresponded well with the sites of tree decline at high altitudes, suggesting that it is an important factor in the localization of tree/forest decline. On the other hand, there is no direct relationship between forest decline and $O_3$ concentration. The $O_3$ concentration, however, tends to increase as wind velocity becomes higher, thus the $O_3$ concentration itself may be a potential secondary factor in the localized decline phenomena. While the diffusion flux of $O_3$ is not related to localized tree decline, the pattern of advection flux is related to those of high wind velocity and localized tree decline. These results suggest that strong wind with large advection flux of $O_3$ may play a key role in the promotion of tree/forest decline at high mountain ridges and peaks.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.11a
• /
• pp.109-111
• /
• 2000

지금까지 대기침적량의 산정에는 크게 대기중의 오염물질 농도와 침적속도를 이용하여 추정하는 방법 (atmospheric flux methods)과 대리표면을 이용하여 건성침적량을 직접 측정하는 표면분석 방법(surface analysis methods)이 주로 이용되고 있다. 전자는 대기중 오염물질 농도를 관측ㆍ분석함으로써 eddy correlation, aerodynamic gradient methods 등의 미기상학적인 방법이 여기에 해당되며 균일하지 못한 표면이나 중력침강이 주가되는 조대입자에 대해 사용이 제한되는 단점이 있다. 이에 반해 대체표면을 사용하는 방법은 일반적으로 시료채취 및 분석과정에 있어서 통제가 용이하기 때문에 현재 광범위하게 널리 사용되고 있다. (중략)

• 한국초전도학회:학술대회논문집
• /
• v.16
• /
• pp.81-81
• /
• 2006

• Asian Journal of Atmospheric Environment
• /
• v.6 no.4
• /
• pp.246-258
• /
• 2012

Particulate matter deposited on leaf surfaces may cause erosion/abrasion of epicuticular wax and the malfunction of stomata. However, the deposition processes of particulate matter, such as elemental carbon (EC), has not been studied sufficiently in Asian forest ecosystems. Deposition processes for particulate ${SO_4}^{2-}$ and EC were studied in a Japanese cedar forest in Kajikawa, Niigata Prefecture, Japan, and in a dry evergreen forest and a dry deciduous forest in Sakaerat, Nakhon Ratchasima province, Thailand. The ${SO_4}^{2-}$ fluxes attributed to rainfall outside the forest canopy (RF), throughfall (TF), and stemflow (SF) showed distinct seasonalities at both sites, increasing from November to February at the Kajikawa site and in March/April at the Sakaerat site. Seasonal west/northwest winds in winter may transport sulfur compounds across the Sea of Japan to the Kajikawa site. At the Sakaerat site, pollutants suspended in the air or dry deposits from the dry season might have been washed away by the first precipitations of the wet season. The EC fluxes from RF and TF showed similar variations by season at the Kajikawa site, while the flux from TF was frequently lower than that from RF at the Sakaerat site. Particulate matter strongly adsorbed onto leaf surfaces is not washed away by rainfall and contributes to the EC flux. At the Kajikawa site, Japanese cedar leaf surfaces accumulated the highest levels of particulate matter and could not be neglected when calculating the total flux. When such leaf-surface particles were considered, the contribution of dry deposition to the total EC flux was estimated to be 67%, 77%, and 82% at the Kajikawa site, and at the evergreen and deciduous forests of the Sakaerat site, respectively. Leaf-surface particles must be included when evaluating the dry and total fluxes of particulate matter, in particular for water-insoluble constituents such as EC.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2006.05a
• /
• pp.135-138
• /
• 2006

OLEDs are attractive because of possible application in display with low operating voltage, low power consumption, self-emission and capability of multicolor emission by the selection of emissive material. We investigated the effects of deposition rate on the electrical characteristics, physical characteristics and optical characteristics of OLEDs in the ITO(indium-tin-oxide)/N,N'-diphenyl-N,N'-bis(3-methyphenyl)-1,1'-biphenyl-4,4'-diamine(TPD)/tris(8-hydroxyquinoline)aluminum($Alq_3$)/Al device. We measured current density, luminous flux and luminance characteristics of devices with varying deposition rates of TPD and $Alq_3$. It has been found that optimal deposition rate of TPD and $Alq_3$ were respectively $1.5{\AA}/s$ from the device structure. An AFM measurement results, surface roughness of the deposited film was the lowest when deposition rate was $1.5{\AA}/s$.

• Journal of Korean Society for Atmospheric Environment
• /
• v.25 no.6
• /
• pp.539-549
• /
• 2009

The purpose of this study is to estimate hourly Asian dust emission flux in springtime by using the optimized Weather Research Forecasting model (WRF) in order to accurately predict the horizontal flux of Asian dusts. Asian dust emission flux using 5 empirical formulas such as US EPA, Park and Inn, Wang, The Goddard Chemistry Aerosol Radiation and Transport (GOCART) and Dust Entrainment and Deposition (DEAD) were calculated and compared by using classified land-use types and size distribution at various locations in China and Mongolia together with the hourly meteorological elements of the WRF model. As a result, the empirical formula in US EPA among them, which was considered the various conditions such as vegetation, soil type and terrain, was better than the other 4 empirical formulas. However, these formulas were adjusted hourly and vertically in time and space because there was different order and time resolution of dust emissions from original empirical formulas.