• Journal of Korean Association for Spatial Structures
• /
• v.17 no.4
• /
• pp.133-140
• /
• 2017

Recently, the interest in the smart buildings is increasing in the architecture field. Among them, a research of facade design using a transformable system that can adjust the effect of the external environment is in progress. One of a typical example of the deployable system is a Scissors system that can change shape by using the geometric conditions of a unit member. Scissors system is a high-tech structural system which can construct the deployable plan and curved space by using the SLE (Scissors-Like Element) consisted of two Bar and Pivot. If the facade is designed by applying Scissors system, it is possible to maximize the performance and aesthetic effect of the structure by using a shape change of the line member. This paper presents a study of deployable facade design applying hybrid-typed Scissors system. A new deployable pattern of facade design is developed by combining Angulated Scissors system and tessellation pattern. Applying the deployable pattern a double skin construction method which is to add an outer wall for design, it raises three dimensional effects and can maximize the artistic essence of the change in shape upon deployment.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.9
• /
• pp.38-45
• /
• 2003

This research is concerned with the dynamic modeling of the multi-purpose satellite with deployable solar arrays equipped with strain energy hinges(SEH). To this end, we proposed the use of the equivalent torsional spring for the SEH and derived the equations of motion assuming that the satellite and solar arrays are being rigid. We also considered the effect of the support string for the ground experiment model, which has been observed as a critical factor affecting the deployment in the ground experiments. From the numerical simulation results, it is found that solar arrays are deployed in a similar pattern but the hub motions are different because of the support strings. It was concluded that the non-gravity deployment of the solar arrays can be approximately simulated by the ground experimental facility. The effects of the support string are also investigated by varying the length of the string. It was found that the current length of the string is adequate for the ground experiment. Ground experimental results will follow.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.8
• /
• pp.603-609
• /
• 2017

In the deployable solid surface antennas, the effects on the performances of antenna due to the structural errors that occur during the deployment are analyzed. The deployable solid surface antennas employed in a satellite are launched in folded configuration and those are deployed in the space environment, and the effects on the antenna performance are calculated depending on the type of surface errors. When the deviation error occurs in one panel, the degradation of performance appears in the side where the incomplete deployment of panel occurs. By assuming that the panel error distribution is in cosine function, the effect of errors are calculated and analyzed with regard to the types and the magnitude of the error. If the antena panel error is uniform, the gain is reduced and pattern is symmetric. For the panel error of cosine 1 or 3 cycle, the main lobe tilts while the pattern is symmetric and the gain reduces for 2 or 4 cycle error.

• Steel and Composite Structures
• /
• v.28 no.5
• /
• pp.607-615
• /
• 2018

The dynamic behavior of the deployment and folding process of a foldable boom based on the Miura origami pattern is investigated in this paper. Firstly, mechanical behavior of a single storey during the motion is studied numerically. Then the deployment and folding of a multi-storey boom is discussed. Moreover, the influence of the geometry parameters and the number of Miura-ori elements n on the dynamic behavior of the boom is also studied. Finally, the influence of the imperfection on the dynamic behavior is investigated. The results show that the angles between the diagonal folds and horizontal folds will have great effect on the strains during the motion. A bistable configuration can be obtained by choosing proper fold angles for a given multi-storey boom. The influence of the imperfection on the folding behavior of the foldable mast is significant.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.2
• /
• pp.197-205
• /
• 2017

During the sea trial, we discovered EMI between MOSCOS and ES DF antenna. CW emitted by MOSCOS raised the threshold level of ES DF antenna. As a result, direction finding rate of ES has been decreased. This is a study for the improvement of EMI between the antennas mounted on a surface ship. An analysis is accomplished for MOSCOS, ES DF antenna and Jamming transmitter. This paper presents the method how to solve EMI based on the measurements and calculations about the ES DF antenna receiving level, MOSCOS radiation pattern and Jamming transmitter thermal noise. The test was performed with optimal deployment of MOSCOS on a surface ship. After changing the position of MOSCOS, EMI has been decreased significantly.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.6
• /
• pp.877-885
• /
• 2018

The anti-submarine helicopter is the most effective weapon system in anti-submarine warfare. Recently changes in the introduction of the anti-submarine warfare sonar system are expected to operate multi-static sonar equipment of the anti-submarine helicopter. Therefore, it is required to study the operational concept of multi-static of anti-submarine helicopter. This paper studies on the optimal search of multi-static based on anti-submarine helicopter considering Furthest On Circles(FOC). First, the deployment of the sensors of the anti-submarine helicopter is optimized using genetic algorithms. Then, the optimized model is extended to consider FOC. Finally, the proposed model is verified by comparing pattern-deployment the search method in Korean Navy.

• Journal of the Korean Home Economics Association
• /
• v.48 no.2
• /
• pp.85-94
• /
• 2010

Comparative analysis of marker efficiency in blouse patterns, based on different sleeve designs, was carried out. Sleeve designs used included set-in-sleeve, laglan sleeve, and epaulet sleeve. The two types of epaulet sleeves, A and B, are based on pattern arrangement methods of center back. Cloth and production conditions are the width of cloth, the number of marking pieces, and the direction for marking deployment. A blouse pattern saved to the PAD CAD System was graded with different sizes and arranged for industrial purpose to calculate the marker efficiency in different conditions. The results were as follows. On the whole, the marker efficiency of small pattern sized set-insleeve was higher than laglan and epaulet sleeve designs. It was also established that marker efficiency is dependent on cloth and production conditions. For small number of marking pieces, efficiency was higher in the condition of 110cm cloth widths compared with that condition of 150cm cloth widths. However the efficiency of large number of marking pieces was higher in the condition of 150cm cloth widths.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.1
• /
• pp.176-181
• /
• 2009

The passenger airbag(PAB) designed for standard sized adults may induce unexpected results to children in out-of-position(OOP) postures. In this work, using MADYMO software, simulations of the OOP injury of children have been performed with respect to PAB design parameters and child dummy positions. The attention is focused on some details with respect to the injury of 3 and 6 year old children in two OOP postures. Among the various design parameters of the passenger airbag systems, four parameters are selected for the sensitivity analysis of the injury with the Taguchi method: bag folding pattern, vent hole size, position of the cover tear seam and the type of door tear seam. An optimal combination of the parameters is suggested.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2272-2279
• /
• 2014

Mobile applications are software systems running on handheld devices, such as smartphones, PDAs, tablets and so on. The market of mobile application has rapidly expanded in the past few years. In this paper, we present a novel approach to track smartphone application usage from a event logs on the mobile device and analyzed both on client system and usage analysis server. We implemented our client system on Android device based usage analytics platform. Based on the analysis server system, we obtained over 47,000 user base, and we get the user's app usage informations on realtime. In this paper, we describe a large scale deployment-based research for a smartphone usage patterns and usage information visualization techniques.

• The KIPS Transactions:PartD
• /
• v.8D no.6
• /
• pp.637-644
• /
• 2001

EJB, providing specification for development and deployment of component based application, permits distributed development as central element of J2EE environment that manages automatically transaction management, persistence, concurrency control that are the most complicated work in enterprise environment. In this paper, we wish to resolve DAO's transaction logic complexity and performance reduction of system in the EJB based legacy system. Therefore, this paper describes the design and implementation of IDAO that applies Iterator pattern. IDAO gets effect that reduces complexity of transaction logic, system overload by database connection, and reduction of performance through container managed transaction.