• 제목/요약/키워드: Dependency ratio

검색결과 244건 처리시간 0.03초

연료에 따른 층류 예혼합화염의 CH* Chemiluminescence 신호특성 변화 (The Dependency of CH* Chemiluminescence of a Laminar Premixed Flame on Fuel Types)

  • 이원남;강석민
    • 한국연소학회지
    • /
    • 제13권2호
    • /
    • pp.14-22
    • /
    • 2008
  • The CH* chemiluminescence of premixed flames and their dependency on fuel types has been experimentally investigated on laminar methane and propane premixed flames. The measured chemiluminescence intensities are observed linearly proportional to the fuel flow rate, which could be interpreted as the CH* chemiluminescence signal is linearly proportional to the heat release rate under fuel lean conditions. The effect of equivalence ratio could be expressed by an exponential function as ${I_{CH*}}^{\propto}\;a_1\;{\exp}(b_1{\Phi})$, where $a_1\;=\;0.00054$ and $b_1\;=\;4.60$ for methane and $a_1\;=\;0.0056$ and $b_1\;=\;5.02$ for propane. Oscillating flames showed the temporal fluctuation of chemiluminescence intensity: however, the time averaged values are virtually identical to those of quiescent flames under the same fuel flow rate and equivalence ratio conditions. This observation suggests that there is no significant flame stretch effect on chemiluminescence intensity, in average values.

  • PDF

MOSFET에서 저주파잡음의 산화막 두께 의존성 관한 실험적 연구 (Experimental Study on Dependency of MOSFET Low-Frequency Noises on Gate Dimensions)

  • 최세곤
    • 대한전자공학회논문지
    • /
    • 제19권1호
    • /
    • pp.9-13
    • /
    • 1982
  • 본실험에서는 N형 Si기판 내부에 P+소오스, 드레인 영역동 마련하고 게이트전극으로서는 PH₃ 를 첨가한 구조로서 Poly-Si gate MOSFET를 제작하여 이에 대한 잡음 특성에 관해 고찰하였다. 실험결과 게이트 면적이 일정하고 막두께가 비교적 두꺼울때는 W/L비 1이상에서는 잡음이 정감되는 경향으로 대체로 이론에 일치하지만 1이하에서는 막두께에 따른 변화는 완만하다는 것이 실증되었다.

  • PDF

한국형 응급환자 분류도구 및 환자의존도에 따른 환자군별 간호시간과 간호사 배치수준 (Nursing Hours and Nurse Staffing according to Korean Triage Acuity Scale and Patient Dependency)

  • 정은희;조성현;이상림;최민진;김성숙;최은경;한경화;전미영
    • 임상간호연구
    • /
    • 제26권3호
    • /
    • pp.395-406
    • /
    • 2020
  • Purpose: The purpose of this study was to analyze nurse staffing according to patients' acuity and dependency by measuring nursing hours. Methods: The study sample included patients who visited the adult emergency departments (EDs) of three tertiary referral hospitals and nurses who worked on shifts for 48 hours from October 24 to 26, 2019. Hourly patient census and nurse staffing were analyzed. Patient acuity was measured using the Korean Triage and Acuity Scale (KTAS), ranging from Level 1 (highest) to Level 5 (lowest). Patient dependency was measured using six items (e.g., clinical attention and communication) and classified into four groups. Nursing activities were observed every 10 minutes and nursing hours per patient and nurse staffing were analyzed according to acuity and dependency. Results: Nurse-to-patient ratio ranged from 1:1.8 to 1:4.2 during the 48 hours of observation. The average work hours of nurses, excluding breaks and meals, was 8.57 hours; 42.5% of which was spent providing direct care. Higher acuity and dependency were associated with higher nursing hours and staffing level. Patients with KTAS Level 1 were provided 74.3 minutes per hour, 5.02 times higher than Level 5 (14.8 minutes). Patients in the highest dependency group were provided 87.4 minutes per hour, 5.75 times higher than the lowest group (15.2 minutes). Newly arrived patients received more nursing hours than continuously stayed patients within the same KTAS Levels. Conclusion: Large variations were found in hourly patient census, acuity, and dependency. Nurse staffing in EDs should be determined based on patient acuity and dependency.

The Comparative Analysis on the Digital Divide of Senior Citizens through the Preference for Mobile Internet and Social Media

  • Park, Kyoung-ryul;Kim, Jeong-lae
    • International journal of advanced smart convergence
    • /
    • 제7권2호
    • /
    • pp.119-126
    • /
    • 2018
  • This study analyzed the digital divide of Korean senior citizens through the preference for smart media. Targeting two media out of mobile internet and mobile social media, the media dependency ratio and the trend of people in their 20s-60s were verified. Regarding the dependency ratio of young people(20s) and senior citizens(60s), in case of mobile internet, people in their 60s were average 8.6% while people in their 20s were average 38.9%, so that the ratio of senior citizens was lower by 30.3%. In case of social media, people in their 60s were average 1%, which was 7.1% lower than people in their 20s(8.1%). And this divide was the digital divide shown in the informatization process through the trend of internet use of senior citizens in their 60s or up. Thus, as the policy measures for solving the digital divide of senior citizens, it would be required to continuously develop the digital cultural programs for senior citizens, to expansively perform the government subsidiary policies like additionally providing the essential information to senior citizens, and also to expand the smart-based infrastructure for senior citizens' participation in economic activities.

완도지역 성인 및 노인의 영양소 섭취 실태조사 (A Study on Nutritional Intakes in Elderly People in Wando Area)

  • 차복경
    • 대한지역사회영양학회지
    • /
    • 제10권6호
    • /
    • pp.880-891
    • /
    • 2005
  • The purpose of this study was to investigate nutrients intakes and nutritional quality of Adults and Elderly People in an island area (Wando). A three-day dietary intakes survey, using a 24 hour recall method was obtained from 187 subjects aged 46 to 84 (mean age 65.3) living in an island area (Wando). Nutient intakes were analyzed using CAN-Pro soft program and compared to Korean RDA. The quality of nutrients was assessed by analyzing nutrient adequacy ratio (NAR), mean adequacy ratio (MAR), and index of nutritional quality (INQ). The average daily mean energy intakes were 1869.0 kcal for males and 1943.9 kcal for females, respectively. Daily intakes of protein for males and females were 28.0 and 30.4 g and those of fat were 31.5 and 28.51 g, respectively. Nutrient consumed below $75\%$ of Korean RDA was protein, vitamin A, Ca and Zn in both males and females. Average CPF ratio of males and females were 78.8 : 6.0 : 15.1 and 80.0 : 6.4 13.4, respectively. Energy intake ratio from protein was significantly higher in over 60 years males. Carbohydrate dependency decreased with age. Protein dependency increased with age. Nutrient adequacy ratio (NAR) of energy, protein vitamin A and vitamin E were increased with age in males. The mean adequacy ratio (MAR), an index of overall dietary quality, were not significantly different by age group. Average MAR for males and females was 0.77 and 0.78, respectively. The index of nutritional quality (INQ) showed the tendency to decrease with age. Especially, there were significantly decreases in INQ of all nutrients, except protein, with age. Based on these results, it is evident that people in the island area did not consume enough nutrients. Specially, dietary intake of protein, vitamin A, vitamin E, and Ca were not adequate. (Korean J Community Nutrition 10(6) : $880\∼891$, 2005)

산업관련표(産業關聯表)에 의(依)한 임업구조분석(林業構造分析)과 유발생산액(誘發生産額) -임업(林業)이 한국경제(韓國經濟)에 미치는 영향(影響)- (Analysis of Forestry Structure and Induced Output Based on Input - output Table - Influences of Forestry Production on Korean Economy -)

  • 이승윤
    • Journal of the Korean Wood Science and Technology
    • /
    • 제2권4호
    • /
    • pp.4-14
    • /
    • 1974
  • The total forest land area in Korea accounts for some 67 percent of the nation's land total. Its productivity, however, is very low. Consequently, forest production accounts for only about 2 percent of the gross national product and a minor proportion of no more than about 5 percent versus primary industry. In this case, however, only the direct income from forestry is taken into account, making no reference to the forestry output induced by other industrial sectors. The value added Or the induced forestry output in manufacturing the primary wood products into higher quality products, makes a larger contribution to the economy than direct contribution. So, this author has tried to analyze the structure of forestry and compute the repercussion effect and the induced output of primary forest products when utilized by other industries for their raw materials, Hsing the input-output table and attached tables for 1963 and 1966 issued by the Bank of Korea. 1. Analysis of forestry structure A. Changes in total output Durng the nine-year period, 1961-1969, the real gross national product in Korea increased 2.1 times, while that of primary industries went up about 1. 4 times. Forestry which was valued at 9,380 million won in 1961, was picked up about 2. 1 times to 20, 120 million won in 1969. The rate of the forestry income in the GNP, accordingly, was no more than 1.5 percent both in 1961 and 1962, whereas its rate in primary industries increased 3.5 to 5.4 percent. Such increase in forestry income is attributable to increased forest production and rise in timber prices. The rate of forestry income, nonetheless, was on the decrease on a gradual basis. B. Changes in input coefficient The input coefficient which indicates the inputs of the forest products into other sectors were up in general in 1966 over 1963. It is noted that the input coefficient indicating the amount of forest products supplied to such industries closely related with forestry as lumber and plywood, and wood products and furniture, showed a downward trend for the period 1963-1966. On the other hand, the forest input into other sectors was generally on the increase. Meanwhile, the input coefficient representing the yolume of the forest products supplied to the forestry sector itself showed an upward tendency, which meant more and more decrease in input from other sectors. Generally speaking, in direct proportion to the higher input coefficient in any industrial sector, the reinput coefficient which denotes the use of its products by the same sector becomes higher and higher. C. Changes in ratio of intermediate input The intermediate input ratio showing the dependency on raw materials went up to 15.43 percent m 1966 from 11. 37 percent in 1963. The dependency of forestry on raw materials was no more than 15.43 percent, accounting for a high 83.57 percent of value added. If the intermediate input ratio increases in any given sector, the input coefficient which represents the fe-use of its products by the same sector becomes large. D. Changes in the ratio of intermediate demand The ratio of the intermediate demand represents the characteristics of the intermediary production in each industry, the intermediate demand ratio in forestry which accunted for 69.7 percent in 1963 went up to 75.2 percent in 1966. In other words, forestry is a remarkable industry in that there is characteristics of the intermediary production. E. Changes in import coefficient The import coefficient which denotes the relation between the production activities and imports, recorded at 4.4 percent in 1963, decreased to 2.4 percent in 1966. The ratio of import to total output is not so high. F. Changes in market composition of imported goods One of the major imported goods in the forestry sector is lumber. The import value increased by 60 percent to 667 million won in 1966 from 407 million won in 1963. The sales of imported forest products to two major outlets-lumber and plywood, and wood products and furniture-increased to 343 million won and 31 million won in 1966 from 240million won and 30 million won in 1963 respectively. On the other hand, imported goods valued at 66 million won were sold to the paper products sector in 1963; however, no supply to this sector was recorded in 1963. Besides these major markets, primary industries such as the fishery, coal and agriculture sectors purchase materials from forestry. 2. Analysis of repercussion effect on production The repercussion effect of final demand in any given sector upon the expansion of the production of other sectors was analyzed, using the inverse matrix coefficient tables attached to the the I.O. Table. A. Changes in intra-sector transaction value of inverse matrix coefficient. The intra-sector transaction value of an inverse matrix coefficient represents the extent of an induced increase in the production of self-support products of the same sector, when it is generated directly and indirectly by one unit of final demand in any given sector. The intra-sector transaction value of the forestry sector rose from 1.04 in 1963 to 1, 11 in 1966. It may well be said, therefore, that forestry induces much more self-supporting products in the production of one unit of final demand for forest products. B. Changes in column total of inverse matrix coefficient It should be noted that the column total indicates the degree of effect of the output of the corresponding and related sectors generated by one unit of final demand in each sector. No changes in the column total of the forestry sector were recorded between the 1963 and 1966 figures, both being the same 1. 19. C. Changes in difference between column total and intra-sector transaction amount. The difference between the column total and intra-sector transaction amount by sector reveals the extent of effect of output of related industrial sector induced indirectly by one unit of final demand in corresponding sector. This change in forestry dropped remarkable to 0.08 in 1966 from 0.15 in 1963. Accordingly, the effect of inducement of indirect output of other forestry-related sectors has decreased; this is a really natural phenomenon, as compared with an increasing input coefficient generated by the re-use of forest products by the forestry sector. 3. Induced output of forestry A. Forest products, wood in particular, are supplied to other industries as their raw materials, increasng their value added. In this connection the primary dependency rate on forestry for 1963 and 1966 was compared, i. e., an increase or decrease in each sector, from 7.71 percent in 1963 to 11.91 percent in 1966 in agriculture, 10.32 to 6.11 in fishery, 16.24 to 19.90 in mining, 0.76 to 0.70 in the manufacturing sector and 2.79 to 4.77 percent in the construction sector. Generally speaking, on the average the dependency on forestry during the period 1963-1966 increased from 5.92 percent to 8.03 percent. Accordingly, it may easily be known that the primary forestry output induced by primary and secondary industries increased from 16, 109 million won in 1963 to 48, 842 million won in 1966. B. The forest products are supplied to other industries as their raw materials. The products are processed further into higher quality products. thus indirectly increasing the value of the forest products. The ratio of the increased value added or the secondary dependency on forestry for 1963 and 1966 showed an increase or decrease, from 5.98 percent to 7.87 percent in agriculture, 9.06 to 5.74 in fishery, 13.56 to 15.81 in mining, 0.68 to 0.61 in the manufacturing sector and 2.71 to 4.54 in the construction sector. The average ratio in this connection increased from 4.69 percent to 5.60 percent. In the meantime, the secondary forestry output induced by primary and secondary industries rose from 12,779 million Wall in 1963 to 34,084 million won in 1966. C. The dependency of tertiary industries on forestry showed very minor ratios of 0.46 percent and 0.04 percent in 1963 and 1966 respectively. The forestry output induced by tertiary industry also decreased from 685 million won to 123 million won during the same period. D. Generally speaking, the ratio of dependency on forestry increased from 17.68 percent in 1963 to 24.28 percent in 1966 in primary industries, from 4.69 percent to 5.70 percent in secondary industries, while, as mentioned above, the ratio in the case of tertiary industry decreased from 0.46 to 0.04 percent during the period 1963-66. The mining industry reveals the heaviest rate of dependency on forestry with 29.80 percent in 1963 and 35.71 percent in 1966. As it result, the direct forestry income, valued at 8,172 million won in 1963, shot up to 22,724 million won in 1966. Its composition ratio lo the national income rose from 1.9 percent in 1963 to 2.3 per cent in 1966. If the induced outcome is taken into account, the total forestry production which was estimated at 37,744 million won in 1963 picked up to 105,773 million won in 1966, about 4.5 times its direct income. It is further noted that the ratio of the gross forestry product to the gross national product. rose significantly from 8.8 percent in 1963 to 10.7 percent in 1966. E. In computing the above mentioned ratio not taken into consideration were such intangible, indirect effects as the drought and flood prevention, check of soil run-off, watershed and land conservation, improvement of the people's recreational and emotional living, and maintenance and increase in the national health and sanitation. F. In conclusion, I would like to emphasize that the forestry sector exercices an important effect upon the national economy and that the effect of induced forestry output is greater than its direct income.

  • PDF

Practical resolution of angle dependency of multigroup resonance cross sections using parametrized spectral superhomogenization factors

  • Park, Hansol;Joo, Han Gyu
    • Nuclear Engineering and Technology
    • /
    • 제49권6호
    • /
    • pp.1287-1300
    • /
    • 2017
  • Based on the observation that ignoring the angle dependency of multigroup resonance cross sections within a fuel pellet would result in nontrivial underestimation of the spatial self-shielding of flux, a parametrized spectral superhomogenization (SPH) factor library (PSSL) method is developed as a practical means of resolving the problem. Region-wise spectral SPH factors are calculated by the normal and transport corrected SPH iterations after ultrafine group slowing down calculations over various light water reactor pin-cell configurations. The parametrization is done with fuel temperature, U-238 number density, fuel radius, moderator source represented by ${\Sigma}_{mod}V_{mod}$, and the number density ratio of resonance nuclides to that of U-238 in a form of resonance interference correction factors. The parametrization is successful in that the root mean square errors of the interpolated SPH factors over the fuel regions of various pin-cells are within 0.1%. The improvement in reactivity error of the PSSL method is shown to be superior to that by the original SPH method in that the reactivity bias of -200 pcm to -300 pcm vanishes almost completely. It is demonstrated that the environment effect takes only about 4% in the reactivity improvement so that the pin-cell based PSSL method is effective in the assembly problems.

Flapwise and non-local bending vibration of the rotating beams

  • Mohammadnejad, Mehrdad;Saffari, Hamed
    • Structural Engineering and Mechanics
    • /
    • 제72권2호
    • /
    • pp.229-244
    • /
    • 2019
  • Weak form integral equations are developed to investigate the flapwise bending vibration of the rotating beams. Rayleigh and Eringen nonlocal elasticity theories are used to investigate the rotatory inertia and Size-dependency effects on the flapwise bending vibration of the rotating cantilever beams, respectively. Through repetitive integrations, the governing partial differential equations are converted into weak form integral equations. The novelty of the presented approach is the approximation of the mode shape function by a power series which converts the equations into solvable one. Substitution of the power series into weak form integral equations results in a system of linear algebraic equations. The natural frequencies are determined by calculation of the non-trivial solution for resulting system of equations. Accuracy of the proposed method is verified through several numerical examples, in which the influence of the geometry properties, rotatory inertia, rotational speed, taper ratio and size-dependency are investigated on the natural frequencies of the rotating beam. Application of the weak form integral equations has made the solution simpler and shorter in the mathematical process. Presented relations can be used to obtain a close-form solution for quick calculation of the first five natural frequencies of the beams with flapwise vibration and non-local effects. The analysis results are compared with those obtained from other available published references.

Analysis of material dependency in an elastic - plastic contact models using contact mechanics approach

  • Gandhi, V.C. Sathish;Kumaravelan, R.;Ramesh, S.;Sriram, K.
    • Structural Engineering and Mechanics
    • /
    • 제53권5호
    • /
    • pp.1051-1066
    • /
    • 2015
  • The study aims on the effect of material dependency in elastic- plastic contact models by contact analysis of sphere and flat contact model and wheel rail contact model by considering the material properties without friction. The various materials are selected for the analysis based on Young's modulus and yield strength ratio (E/Y). The simulation software 'ANSYS' is employed for this study. The sphere and flat contact model is considered as a flattening model, the stress and strain for different materials are estimated. The simulation of wheel-rail contact model is also performed and the results are compared with the flattening model. The comparative study has also been extended for finding out the mean contact pressure for different materials the E/Y values between 150 and 660. The results show that the elastic-plastic contact analysis for materials up to E/Y=296.6 is depend on the nature of material properties and also for this material the mean contact pressure to yield strength reaches 2.65.

Swirl ratio effects on tornado vortices in relation to the Fujita scale

  • Hangan, H.;Kim, J.D.
    • Wind and Structures
    • /
    • 제11권4호
    • /
    • pp.291-302
    • /
    • 2008
  • Three-dimensional engineering simulations of momentum-driven tornado-like vortices are conducted to investigate the flow dynamics dependency on swirl ratio and the possible relation with real tornado Fujita scales. Numerical results are benchmarked against the laboratory experimental results of Baker (1981) for a fixed swirl ratio: S = 0.28. The simulations are then extended for higher swirl ratios up to S = 2 and the variation of the velocity and pressure flow fields are observed. The flow evolves from the formation of a laminar vortex at low swirl ratio to turbulent vortex breakdown, followed by the vortex touch down at higher swirls. The high swirl ratios results are further matched with full scale data from the Spencer, South Dakota F4 tornado of May 30, 1998 (Sarkar, et al. 2005) and approximate velocity and length scales are determined.