DOI QR코드

DOI QR Code

Analysis of material dependency in an elastic - plastic contact models using contact mechanics approach

  • Gandhi, V.C. Sathish (Department of Mechanical Engineering, University College of Engineering Ariyalur (A constituent College of Anna University, Chennai)) ;
  • Kumaravelan, R. (Department of Mechanical Engineering, Velalar College of Engineering and Technology) ;
  • Ramesh, S. (Department of Mechanical Engineering,Vel Tech High Tech Dr.Rangarajan Dr.Sakunthala Engineering College) ;
  • Sriram, K. (Department of Mechanical Engineering, Amrita School of Engineering)
  • Received : 2013.07.02
  • Accepted : 2015.01.30
  • Published : 2015.03.10

Abstract

The study aims on the effect of material dependency in elastic- plastic contact models by contact analysis of sphere and flat contact model and wheel rail contact model by considering the material properties without friction. The various materials are selected for the analysis based on Young's modulus and yield strength ratio (E/Y). The simulation software 'ANSYS' is employed for this study. The sphere and flat contact model is considered as a flattening model, the stress and strain for different materials are estimated. The simulation of wheel-rail contact model is also performed and the results are compared with the flattening model. The comparative study has also been extended for finding out the mean contact pressure for different materials the E/Y values between 150 and 660. The results show that the elastic-plastic contact analysis for materials up to E/Y=296.6 is depend on the nature of material properties and also for this material the mean contact pressure to yield strength reaches 2.65.

Keywords

References

  1. Arslan, M.A. and Kayabasi, O. (2012), "3-D rail-wheel contact analysis using FEA", Adv. Eng. Softw., 45, 325-331. https://doi.org/10.1016/j.advengsoft.2011.10.009
  2. Braghin, F., Lewis, R., Dwyer-Joyce, R.S. and Bruni, S. (2006), "A mathematical model to predict railway wheel profile evolution due to wear", Wear, 261, 1253-1264. https://doi.org/10.1016/j.wear.2006.03.025
  3. Chang, W.R., Etsion, I. and Bogy, D.B. (1987), "An elastic-plastic model for the contact of rough surfaces", ASME. J. Tribol., 109, 257-263. https://doi.org/10.1115/1.3261348
  4. Davis, J.R. (1999), Metals Handbook, 2nd Edition, ASM International, Metals Park, OH.
  5. Donzella, G. and Petrogalli, C. (2010), "A failure assessment diagram for components subjected to rolling contact loading", Int. J. Fatig., 32(2), 256-268. https://doi.org/10.1016/j.ijfatigue.2009.06.016
  6. Haines, D.J. and Ollerton, E. (1963), "Contact stress distribution on elliptical contact surfaces subjected to radial and tangential forces", Proceedings of Institution of Mechanical Engineers, 177(4), 45-54.
  7. Jackson, R.L. and Green, I. (2005), "A finite element study of elasto plastic hemispherical contact against a rigid flat", ASME. J. Tribol., 127, 343-54. https://doi.org/10.1115/1.1866166
  8. Johnson, K.L. (1985), Contact Mechanics, Cambridge University Press, Cambridge.
  9. Kogut, L. and Etsion, I. (2002), "Elastic-plastic contact analysis of a sphere and a rigid flat", ASME. J. Tribol., 69, 657-662.
  10. Kumaravelan, R., Ramesh, S., Sathish Gandhi, V.C., Joemax Agu, M. and Thanmanaselvi, M., (2013), "Analysis of multi leaf spring based on contact mechanics-a novel approach", Struct. Eng. Mech., 47(3), 443-454. https://doi.org/10.12989/sem.2013.47.3.443
  11. Mohan, P.M. (2012), "Analysis of railway wheel to study thermal and structural behaviour", Int. J. Scientif. Eng. Res., 3(11), 1-4.
  12. Monfared, V. (2011), "A new analytical formulation for contact stress and prediction of crack propagation path in rolling bodies and comparing with finite element model (FEM) results statically", Int. J. Phys. Sci., 6(15), 3589-3594.
  13. Monfared, V. (2012), "Contact stress analysis in rolling bodies by finite element method (FEM) statically", J. Mech. Eng. Autom., 2(2), 12-16. https://doi.org/10.5923/j.jmea.20120202.03
  14. Monfared, V. and Khalili, M.R. (2011), "Investigation of relations between atomic number and composition weight ratio in PZT and SMA and prediction of mechanical behavior", Acta phys. Pol. A., 120, 424-428. https://doi.org/10.12693/APhysPolA.120.424
  15. Polin, L. and Lin, J.F. (2006), "A new method for elastic-plastic contact analysis of a deformable sphere and a rigid flat", ASME. J. Tribol., 128, 221-229. https://doi.org/10.1115/1.2164469
  16. Sackfield, A. and Hills, D. A. (1983), "Some useful results in the classical Hertz contact problem", J. Strain Anal., 18(2), 101-105. https://doi.org/10.1243/03093247V182101
  17. Santamaria, J., Vadillo, E.G. and Oyarzabal, O. (2009), "Wheel-rail wear index prediction considering multiple contact patches", Wear, 267, 1100-1104. https://doi.org/10.1016/j.wear.2008.12.040
  18. Smith, J.O. and Liu, C.K. (1953), "Stresses due to tangential and normal loads on an elastic solid with application to some contact stress problems", J. Appl. Mech., 20, 157-166.
  19. Sathish Gandhi, V.C., Ramesh, S., Kumaravelan, R. and Thanmanaselvi, M. (2012), "Contact analysis of spherical ball and a deformable flat model with the effect of tangent modulus", Struct. Eng. Mech., 44(1), 61-72. https://doi.org/10.12989/sem.2012.44.1.061
  20. Yaylac, M. and Birinci, A. (2013), "The receding contact problem of two elastic layers supported by two elastic quarter planes", Struct. Eng. Mech., 48(2), 241-255. https://doi.org/10.12989/sem.2013.48.2.241
  21. Zakeri, J.A., Fathali, M. and Boloukian, N. (2011), "Effects of rail cant on wheel-rail contact forces in slab tracks", Int. J. Mech. Appl., 1(1), 12-21. https://doi.org/10.5923/j.mechanics.20110101.02
  22. Zhu, J.J., Ahmed, A.K.W. and Rakheja, S. (2007), "An adaptive contact model for simulation of wheel-rail impact load due to a wheel flat", Proceedings of the 13th National Conference on Mechanisms and Machines, IISc, Bangalore, India.
  23. Zong, N. and Dhanasekar, M. (2012), "Analysis of rail ends under wheel contact loading", Int. J. Aeros. Mech. Eng., 6, 452-460.

Cited by

  1. Characterization of the effect of joint clearance on the energy loss of flexible multibody systems with variable kinematic structure vol.63, pp.5, 2015, https://doi.org/10.12989/sem.2017.63.5.691
  2. Development of optimum modeling approach in prediction of wheelflats effects on railway forces vol.69, pp.5, 2015, https://doi.org/10.12989/sem.2019.69.5.499
  3. Numerical analysis of the receding contact problem of two bonded layers resting on an elastic half plane vol.72, pp.6, 2015, https://doi.org/10.12989/sem.2019.72.6.775
  4. Finite element modeling of contact between an elastic layer and two elastic quarter planes vol.26, pp.2, 2020, https://doi.org/10.12989/cac.2020.26.2.107