• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.74-78
• /
• 2001

In this study, out-of-plane properties and CTEs were predicted for 8-harness satin weave textile composites. The properties were calculated by unit cell analysis for configurations with varied waviness ratio and phase shifts. Macro elements were employed to reduce the computer resource requirement. It was found that the out-of-plane properties and CTEs were varied as the phase shift changed. However the dependency was much weaker than the in-plane properties.

• 통상정보연구
• /
• 제9권4호
• /
• pp.127-139
• /
• 2007

There are three methods to examine import structures : 1) look at import coefficient, 2) import dependency, and 3) composition ratio of imported products. Therefore, this study analyses the import structure of Korea using the three methods above and when final demand occurs on produced goods and services in each industrial section, it divides import induction coefficients that indicate size of induced import directly and indirectly into consumption, investment and export to identify the effect of export on import induction.

• Journal of the Optical Society of Korea
• /
• 제9권3호
• /
• pp.119-122
• /
• 2005

Silica-based $2\times2$ thermo-optic (TO) switch using the MMI couplers which have a large fabrication tolerance of 110 (${\mu}m$ were fabricated and operated. Important features of the proposed switch are shown to be a polarization dependency loss of 0.1dB, an extinction ratio of 32.7dB, and a power consumption of 202.8mW.

• 대한전자공학회논문지SD
• /
• 제43권12호
• /
• pp.1-7
• /
• 2006

본 논문에서는 자동 온도 보상 기법을 사용한 on-chip CMOS 내부 전원 전압 발생기를 제안하였다. PMOSFET의 경우, 게이트 바이어스 저압에 따라 온도의 변화에 대한 소오스-드레인간 전류 특성이 달라진다. 제안된 내부 전원 전압 발생기는 서로 다른 게이트 바이어스 전압에 두 개의 PMOSFET를 놓고, 이의 온도에 대한 서로 상이한 소오스-드레인간 전류 특성을 이용하여 내부 전원 전압 발생기 전체의 온도 의존도를 줄였다. 제안된 회로는 동부-아남 $0.18{\mu}m$ 공정을 이용하여 제작되었으며 측정 결과로 내부 전원 전압은 $-10^{\circ}C{\sim}100^{\circ}C$의 범위에서 $-0.49mV/^{\circ}C$의 온도 의존도를 보였으며 $2.2V{\sim}4.0V$의 동작 범위에서 외부 전압에 대하여 내부 전원 전압의 변화는 6mV/V를 나타내었다. 전체 전류소모는 $1.1{\mu}A@2.5V$로 저전력을 구현할 수 있었다.

• 센서학회지
• /
• 제25권2호
• /
• pp.124-130
• /
• 2016

NDIR $CO_2$ gas sensor was built with ASIC implemented thermopile sensor which included temperature sensor and unique elliptical waveguide structures in this paper. The temperature dependency of dual infrared sensor module ($CO_2$ and reference IR sensors) has been characterized and its output voltage characteristics according to the temperature and gas concentration were proposed for the first time. NDIR $CO_2$ gas and reference IR sensors showed linear output voltages according to the variation of ambient temperatures from 243 K to 333 K and their slopes were 14.2 mV/K and 8.8 mV/K, respectively. The output voltages of temperature sensor also presented a linear dependency according to the ambient temperature and could be described with V(T)=-3.191+0.0148T(V). The output voltage ratio between $CO_2$ and reference IR sensors revealed irrelevant to the changes of ambient temperatures and gave a constant value around 1.6255 with standard deviation 0.008 at 0 ppm. The output voltage of $CO_2$ gas sensor at zero ppm $CO_2$ gas consisted of two components; one is caused by the HPB (half pass-band) of IR filter and the other is attributed to the part of $CO_2$ absorption wavelength. The characteristics of output voltages of $CO_2$ gas sensor could be accurately modeled with three parameters which are dependent upon the ambient temperatures and represented small average error less than 1.5% with 5% standard deviation.

• 융합신호처리학회논문지
• /
• 제2권2호
• /
• pp.13-19
• /
• 2001

기존의 프랙탈 영상복원은 모든 치역 블럭에 대해 반복축소변환을 수행하므로 복원시 많은 계산량이 요구되었다. 이를 개선하기 위해 각 치역 블럭마다 반복축소변환이 필요한 영역과 필요하지 않은 영역으로 구분하는 방법이 제시된 바 있다. 반복축소변환이 필요 없는 영역을 데이타 의존영역이라 하고, 데이타 의존영역이 확장될수록 반복축소변환 영역은 줄어든다. 그래서 본 논문에서는 정의역 블록의 탐색 영역을 치역과 비슷한 영역으로 제한하여, 정의역 블럭이 더 많이 중복되도록 부호화하여 데이타 의존영역을 최대화 즉, 반복축소변환 영역을 최소화한다. 반복축소변환 영역이 최소가 되는 정의역을 정의역 최소화 기법으로 정의한다. 그래서 정의역 최소화 기법을 이용하여 프랙탈 영상 복원시 화질에 거의 영향을 미치지 않고, 반복축소변환에 필요한 계산량을 감소시켜 고속 복원이 가능하다.

• Structural Engineering and Mechanics
• /
• 제27권4호
• /
• pp.425-438
• /
• 2007

Large changes in stiffness associated with cracking and yielding of reinforced concrete sections may be expected to occur during the dynamic response of reinforced concrete frames to earthquake ground shaking. These changes in stiffness in stories that experience cracking might be expected to cause relatively large peak interstory drift ratios. If so, accounting for such changes would add complexity to seismic design procedures. This study evaluates changes in an index parameter to establish whether this effect is significant. The index, known as the coefficient of distortion (COD), is defined as the ratio of peak interstory drift ratio and peak roof drift ratio. The sensitivity of the COD is evaluated statistically for five- and nine-story reinforced concrete frames having either uniform story heights or a tall first story. A suite of ten ground motion records was used; this suite was scaled to five intensity levels to cause varied degrees of damage to the concrete frame elements. Ground motion intensity was found to cause relatively small changes in mean CODs; the changes were most pronounced for changes in suite scale factor from 0.5 to 1 and from 1 to 4. While these changes were statistically significant in several cases, the magnitude of the change was sufficiently small that values of COD may be suggested for use in preliminary design that are independent of shaking intensity. Consequently, design limits on interstory drift ratio may be implemented by limiting the peak roof drift in preliminary design.

• 조명전기설비학회논문지
• /
• 제26권6호
• /
• pp.8-15
• /
• 2012

In this paper, we investigated possible optical parameters causing deviation of experimentally observed output spectra from theoretically predicted results in a high-order fiber comb filter based on a polarization-diversity loop configuration. They include wavelength dependency of half-wave plates (HWPs) inserted in the filter for wavelength switching and the modal birefringence of single-mode fibers (SMFs) with which optical components comprising the filter are connected. In order to consider the effect of the modal birefringence of the SMF on a filter performance, it is modeled as a low birefringence fiber with an arbitrary orientation angle and birefringence. It is found from the simulation results that the modal birefringence of SMFs strongly affects the spectral characteristics of the filter and decreases the extinction ratio of the filter, compared with the wavelength dependency of HWPs. In particular, it is also confirmed that the spectral deviation and asymmetric distortions of side-lobes in narrow band transmission spectra result mainly from the modal birefringence of SMFs.

• 한국연소학회지
• /
• 제12권4호
• /
• pp.1-7
• /
• 2007

Carbon monoxide (CO) is not only an important intermediate species in chemical reaction mechanisms of hydrocarbon fuel combustion, but also a crucial pollutant species emitted from automotive engines. To better understand the physical processes impacting CO emissions, the development of laser-based measurement techniques that can visualize in-cylinder CO distributions is desirable. Among these techniques, Laser-Induced Fluorescence (LIF) is a sensitive and species-selective detection technique capable of good spatial resolution. However, some technical matters such as deep UV excitation, severe pressure dependency of the LIF signal, and potential interference from other species have been major challenges for CO LIF application. This study is focused on investigating the feasibility of CO two-photon LIF in a direct-injection diesel engine operating at typical pressure and temperature conditions with commercial grade diesel fuel. Spectroscopic analysis shows that the CO fluorescence signal can be separated from $C_2$ Swan band or broadband fluorescence from PAHs when the signal is collected near 483 nm. The signal-to-noise ratio of CO LIF deteriorate rapidly as pressure is increased, following $P^{-1.49}$ which matches the theoretical signal pressure dependency.

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권2호
• /
• pp.37-44
• /
• 2020

The fifth generation (5G) mobile communication has been commercialized and the 5G applications, such as the artificial intelligence (AI) and the internet of things (IoT), are deployed all over the world. The 5G new radio (NR) wireless networks are characterized by 100 times more traffic, 1000 times higher system capacity, and 1 ms latency. One of the promising 5G technologies is non-orthogonal multiple access (NOMA). In order for the NOMA performance to be improved, sometimes the additive signal-dependent Gaussian noise (ASDGN) channel model is required. However, the channel capacity calculation of such channels is so difficult, that only lower and upper bounds on the capacity of ASDGN channels have been presented. Such difficulties are due to the specific constraints on the dependency. Herein, we provide the capacity of ASDGN channels, by removing the constraints except the dependency. Then we obtain the ASDGN channel capacity, not lower and upper bounds, so that the clear impact of ASDGN can be clarified, compared to additive white Gaussian noise (AWGN). It is shown that the ASDGN channel capacity is greater than the AWGN channel capacity, for the high signal-to-noise ratio (SNR). We also apply the analytical results to the NOMA scheme to verify the superiority of ASDGN channels.