• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.2
• /
• pp.71-79
• /
• 2022

The aim of this study is to see how government spending on education, health, and social security affects ratios in Indonesia. The third sector has a critical role to play in reducing the dependency ratio. It also aims to lower unemployment and poverty rates. This study uses the GMM panel data model. This model can determine the dynamic response of the ratio that comes from a number of variables. This study uses data from 33 provinces from 2010 to 2018. The results show that government spending in the education and health sectors has a positive effect on the dependency ratio, both in the short and long term. Social security has a significant effect on the dependency ratio in the long term, but not in the short term. Government spending in the education sector and health sector and social security sector have a positive and significant effect on disease and illness. The study's findings show a high level of poverty with a large standard deviation. The high ratio value is due to the large number of restrictions placed on a number of regions. Each province has made a significant contribution to overcoming these challenges, particularly in terms of the comparative ratio.

• International Journal of High-Rise Buildings
• /
• v.1 no.1
• /
• pp.1-13
• /
• 2012

The importance of appropriate use of damping evaluation techniques and points to note for accurate evaluation of damping are first discussed. Then, the variation of damping ratio with amplitude is discussed, especially in the amplitude range relevant to wind-resistant design of buildings, i.e. within the elastic limit. The general belief is that damping increases with amplitude, but it is emphasized that there is no evidence of increasing damping ratio in the very high amplitude range within the elastic limit of main frames, unless there is damage to secondary members or architectural finishings. The damping ratio rather decreases with amplitude from a certain tip drift ratio defined as "critical tip drift ratio," after all friction surfaces between primary/structural and secondary/non-structural members have been mobilized.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.4
• /
• pp.291-296
• /
• 2021

Recently, the dual-polarized antenna array has drawn attention due to the dependency of its signal processing gain on the signal polarization. Even though this polarization dependency makes it possible to mitigate a non-right-hand circularly polarized (non-RHCP) jamming signal from the same direction as a GPS signal, the dual-polarized antennas are not yet widely used for various applications. This study suggests a method that can acquire the polarization dependency of the signal-processing gain by intentionally misaligning antenna elements in a single-polarized antenna array. The simulation results show that the proposed method can successfully mitigate a non-RHCP jammer from the same direction as a GPS signal as if a dual-polarized antenna array does and provide comparable signal-to-jammer-plus-noise ratio (SJNR) performance with a completely aligned single-polarized antenna array and a dual-polarized antenna array.

• Wind and Structures
• /
• v.21 no.2
• /
• pp.159-182
• /
• 2015

This study focuses on the amplitude dependency of damping of tall structures by the random decrement technique (RDT). Many researchers have adopted RDT to establish the amplitude dependency of damping ratios in super-tall buildings under strong wind loads. In this study, a series of simulated examples were analyzed to examine the reliability of this method. Results show that damping ratios increase as vibration amplitudes increase in several cases; however, the damping ratios in the simulated signals were preset as constants. This finding reveals that this method and the derived amplitude-dependent damping ratio characteristics are unreliable. Moreover, this method would obviously yield misleading results if the simulated signals contain Gaussian white noise. Full-scale measurements on a super-tall building were conducted during four typhoons, and the recorded data were analyzed to observe the amplitude dependency of damping ratio. Relatively wide scatter is observed in the resulting damping ratios, and the damping ratios do not appear to have an obvious nonlinear relationship with vibration amplitude. Numerical simulation and field measurement results indicate that the widely-used method for establishing the amplitude-dependent damping characteristics of super-tall buildings and the conclusions derived from it might be questionable at the least. More field-measured data must be collected under strong wind loads, and the damping characteristics of super-tall buildings should be investigated further.

• Korean Journal of Adult Nursing
• /
• v.27 no.3
• /
• pp.304-313
• /
• 2015

Purpose: Aspiration pneumonia (AP) is the major complication of dysphagia in patients with acute stroke. Nursing management for dysphagia influences on patients' health outcomes. The purpose of this study was to develop and evaluate the effects of Dysphagia Nursing Protocol (DNP) for patients with acute stroke. We aimed to examine the incidence of AP and the dependency rate at the discharge. Methods: We used a non-equivalent control group posttest only design in this study. DNP was developed with content validity index > 0.75 in all items. This protocol was composed of the evaluation, education, complication prevention, and checking phases. After training the staff nurses, we applied DNP protocol to the experimental group. The control group was enrolled from June to August 2013 (n=80), and the experimental group was June to August 2014 (n=64). Results: The incidence of AP was 16.3% in control group while 4.7% in experimental group (p=.028), and the Odds Ratio (OR) was 0.26 (p=.045). The dependency ratio was 66.3% in control group while 43.8% in experimental group (p=.011), and the OR was 0.33 (p=.011). Conclusion: DNP was beneficial for the reducing the risk of AP and the improved the functional status.

• Steel and Composite Structures
• /
• v.33 no.1
• /
• pp.133-142
• /
• 2019

In the present study, microstructure-dependent static stability analysis of inhomogeneous tapered micro-columns is performed. It is considered that the micro column is made of functionally graded materials and has a variable cross-section. The material and geometrical properties of micro column vary continuously throughout the axial direction. Euler-Bernoulli beam and modified couple stress theories are used to model the nonhomogeneous micro column with variable cross section. Rayleigh-Ritz solution method is implemented to obtain the critical buckling loads for various parameters. A detailed parametric study is performed to examine the influences of taper ratio, material gradation, length scale parameter, and boundary conditions. The validity of the present results is demonstrated by comparing them with some related results available in the literature. It can be emphasized that the size-dependency on the critical buckling loads is more prominent for bigger length scale parameter-to-thickness ratio and changes in the material gradation and taper ratio affect significantly the values of critical buckling loads.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.12
• /
• pp.909-917
• /
• 2020

The research aims to analyze the firm-specific and macroeconomic factors that affect insurance company's financial performance. The research explores the variables that influence the financial performance of the United Arab Emirates (UAE)' insurance companies. The analysis for determining financial performance considers the following variables: the firm's age, retention ratio, capital adequacy, underwriting risk/loss ratio, financial-leverage, reinsurance dependency, and macro-economic factors such as GDP per capita, inflation rate considered as independent factors. The return-on-asset (ROA) is the key measuring indicator; it is regarded as the dependent variable for financial performance measures. The research focuses on secondary information obtained from insurance companies' financial statements. The researcher targeted 18 insurance companies listed on the UAE stock exchanges for study purposes. The research examines the overall factors that influence the financial performance of an insurance company. For analysis of data, software package of social sciences (SPSS version 20) is used. The studies used correlation and multiple linear regression analysis to determine financial performance and their effects. The analysis suggests that there are important and constructive relationships between the size, capital adequacy, and reinsurance dependency, while loss ratio, retention ratio, and financial leverage indicate a major negative relationship. And there's no link between GDP per capita and inflation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.5
• /
• pp.89-96
• /
• 2023

In this study, the displacement dependence, strength, and energy dissipation capacity of the steel rod damper were evaluated. The test variables were cross-sectional shape and aspect ratio. The 6th test specimens were made for performance test. From the test results, it was evaluated that the displacement dependence conditions of design code were satisfied in all specimens. And the strength effect according to the cross-sectional shape was minimal. As a result, the strength and energy dissipation capacity of the aspect ratio of 13.7 were evaluated as excellent.

• Journal of Korean Society for Quality Management
• /
• v.25 no.3
• /
• pp.22-38
• /
• 1997

In a traditional sequential acceptance sampling plan, it is assumed that the sampled items are independent each other. In this paper, stochastically dependent sequential acceptance sampling plans are dealt when there exists dependency between sampled items. Monte-Calro algorithm is used to find the acceptance and rejection probabilities of a lot. The number of defectives for the test to be accepted and rejected in probability ratio sequential test can be found by using these probabilities. The formula for measures of performance of these sampling plans is developed. Type I and II error probabilities are estimated by simulation. This research can be a, pp.ied to sequential sampling procedures in place of control charts where there is a recognized and necessary dependency during the production processes. Also, dependent multiple acceptance sampling plans can be derived by extending this sequential sampling procedure. As a numerical example, a Markov dependent process model is given, and the characteristics of the sampling plans are examined according to the change of the dependency factor.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.9
• /
• pp.1053-1057
• /
• 2012

In this study, the temperature-dependency of the tensile properties of a glass fiber reinforced plastic (GFRP) used in wind turbine blades was examined. The tensile strength, elastic modulus, and Poisson's ratio of the tensile specimen manufactured from uniaxial ($0^{\circ}$) and triaxial ($0/{\pm}45^{\circ}$) laminate composite plates were measured at four different testing temperatures-room temperature, $-30^{\circ}C$, $-50^{\circ}C$, and $60^{\circ}C$. It was found that the tensile strengths and elastic moduli of the uniaxial laminates were greater than those of the triaxial laminates over the testing temperature range. The tensile strength of the two laminates was significantly dependent on the testing temperature, while the dependency of the elastic modulus on the temperature was insignificant. Furthermore, it could be considered that the Poisson's ratio changed slightly with a change in the testing temperature.