• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.3
• /
• pp.117-121
• /
• 2021

The Multi-crew Pilot License (MPL) is a new pilot qualification introduced by ICAO to train co-pilots for transport aircraft based on efficient and stable competency to respond to changes in the operating environment and technology. ICAO and the European Union Aviation Safety Agency (EASA) require a minimum flight of 240 hours for MPL qualification training, and allow the use of flight simulation training devices (FSTDs) for most of the training, specifying the performance requirements for FSTDs. As South Korea is also preparing for the operation of the MPL training program, it is essential to establish the operating standards for FSTDs required for MPL training. This study aims to identify the international standards for FSTDs related to MPL training, and to compare them with the current operating standards for FSTDs in South Korea for presenting a standard (draft) that can be used when introducing domestic MPL training programs in the future.

• Journal of Advanced Navigation Technology
• /
• v.27 no.3
• /
• pp.255-261
• /
• 2023

A main purpose of this research was to analyze environmental factors to influence helicopter accidents contrary to the fact that the almost 80% of helicopter accidents happened due to pilots' human errors. There have been about 14 helicopter accidents in civil aviation sector last decade. It is noteworthy that nine of 14 accidents happened during the external sling load operation. Moreover, there is no law or regulation which could cover the helicopter external sling load operation or human external cargo in Korea. In this paper, it was analyzed the training and education regulations regarding helicopter external sling load operation or human external cargo in regulations of FAA and EASA, Based on analyzing and comparing the FAR part 133 and domestic aviation law (aviation safety act and flight safety regulations), it was found out the implication how to apply helicopter type rating for external sling load operation and human external cargo operation. To sum up, this paper expect central government should cooperate and amend aviation law which apply external sling load operation and external cargo to establish sound safety culture in Korea.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.201-208
• /
• 2022

As around the world, ground and underground transportation capacity is reaching its limit, centering on urban areas. As urban traffic becomes congested, time and cost are astronomical, and environmental destruction caused by urban pollution is becoming increasingly serious. As a way to solve this problem, the means of flying over the air are in the spotlight as the next generation of future transportation, and the concept of urban air mobility (UAM, Urban Air Mobility) is defined as systematic planning. The development of an electric-powered vertical take-off (eVTOL) aircraft that obtains electric power through a battery using a personal aerial vehicle (PAV) as a means of transportation has accelerated. As the aircraft development of new technology aircraft in the evtol method is actively carried out, the need to prepare systems such as aircraft certification standards, pilot qualification systems, and qualification management is emerging. The Federal Aviation Administration (FAA) and the European Union Aviation Safety Agency (EASA), which lead international standards, announced new special technical conditions and temporary regulations SCVTOL-01, respectively. However, the pilot qualification system for operating the uam aircraft has not yet been clearly announced. Therefore, this paper analyzes the recently announced FAA regulations and EASA regulations to identify differences and directions in perspectives on UAMs and study the existing vertical take-off and landing aircraft (VTOL) pilot qualification system to present directions for qualification classification.

• Journal of Korean Society for Quality Management
• /
• v.51 no.3
• /
• pp.435-444
• /
• 2023

Purpose: To attain advanced performance certification, safety aspects along with functionality and performance are essential. Hence, this study suggests radiation leakage assessment methods for aviation security equipment during its performance certification. Methods: Detection technology guided the choice of radiation leakage assessment targets. We then detailed measurement and evaluation methods based on equipment type and operation mode. Equipment was categorized as container or box types for establishing measurement procedures. Results: We've developed specific radiation leakage assessment procedures for different types of aviation security equipment, crucial for ensuring airport safety. Using these procedures allows efficient evaluation of compliance with radiation leakage standards. Conclusion: The suggested radiation leakage assessment method aims to enhance aviation security and reliability. Future research will focus on identifying risks in novel aviation security equipment detection technologies and establishing safety standards.

• Journal of Aerospace System Engineering
• /
• v.11 no.3
• /
• pp.31-38
• /
• 2017

As demand for best practices relative to flight test safety management operations and processes in the aviation industry grows, standards for such aspects of the industry in Korea should be examined. Therefore, in this paper, we conducted flight test operation processes and safety management program development studies based on documents related to flight tests of the Korean civil aviation KC-100, the military aircraft T-50, the FAA (Federal Aviation Administration), and CAAC (Civil Aviation Administration of China) for performance validation, test evaluation and safety certification for aircraft under development and remodeling. In addition, we introduced and analyzed best practices of the FTSC (Flight Test Safety Committee) applicable to aircraft flight test processes.

• Journal of Advanced Navigation Technology
• /
• v.26 no.3
• /
• pp.125-135
• /
• 2022

UAM is emerging as the biggest issue in the aviation industry and which is attracting a lot of attention not only domestically but also internationally. In Korea, active research is being conducted centered on the government and industry-university research institutes, such as the establishment of a future K-UAM concept of operation. Therefore, in this study applies the SORA (Specific Operation Risk Assessment) model established by the European JARUS (Joint Authorities for Rulemaking on Unmanned Systems) to apply the K-UAM operation environment and specific corridor for the purpose of cargo transportation that will be operated in the future that the government is promoting. We intend to suggest policy and technical measures for risk mitigation in the initial operating environment by evaluating the level of risk and analyzing the results.

• Journal of Positioning, Navigation, and Timing
• /
• v.13 no.2
• /
• pp.131-136
• /
• 2024

This paper deal with a method for calculating the continuity of Korea Augmentation Satellite System (KASS), which was completed in Korea in December 2023, and a plan to respond in the event that a continuity hazard situation occurs during operation. For this purpose, the International Civil Aviation Organization (ICAO) Satellite Based Augmentation System (SBAS) continuity standards, Wide Area Augmentation System (WAAS), and European Geostationary Navigation Overlay Service (EGNOS) continuity cases are examined in this paper. According to the measures recommended by the ICAO, when the number of continuity risks exceeds a certain level and the level drops drastically, various mitigation operations by country are implemented. Through this, if KASS does not meet ICAO continuity standards in the future, such measures can be referred to. In addition, this paper computes the short-term KASS continuity during the test broadcast period. Although continuity does not meet the ICAO standards, although this test period is too short, further meaningful analysis in the future is required. Additionally, this paper carried out an analysis of the timing and period to systematically calculate the meaningful value of continuity.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.2
• /
• pp.106-110
• /
• 2021

In this study, the main factors affecting the number of passengers and cargo volume transported by air between Korea, China and Japan over the past 20 years are to be identified. For the analysis, data from three countries' GDP and per capita as well as exchange rates and international oil prices were used, and OLS multiple regression analysis and fixed effect analysis were performed. As a result of the analysis, both the number of passengers and cargo volume transported by air showed a negative (-) direction for GDP, which represents the country's economic power, and a positive (+) direction, for per capita GDP, which represents income level. And the increase in the exchange rate between China and Japan acted in a positive (+) direction on the increase in the number of passengers, and the effect of oil prices was found to be limited.

• Journal of Advanced Navigation Technology
• /
• v.23 no.4
• /
• pp.265-272
• /
• 2019

In this paper, we selected commuting scenarios in the most congested metropolitan area in Korea, and conducted noise analysis during personal air vehicle (PAV) operation using aviation environmental design tool (AEDT)software which was developed by Federal Aviation Administration (FAA). Noise is the second important factor after safety in order to operate PAVs through concepts such as ODM (on-demand mobility) introduced by National Aeronautics and Space Administration (NASA). Noise analysis were performed by modeling low-noise ePAVs as commercial helicopters and predicted residential suitability in order to resolve problems in which accurate NPD (noise power distance) data from PAVs were not released. The application of noise reduction technology such as electric propulsion has significantly reduced noise exposure levels and has reached the conclusion that commuting with PAVs is feasible without noise problems in the metropolitan area.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.11
• /
• pp.87-93
• /
• 2020

A key component of aviation safety is to eliminate the errors in commercial aircraft air data systems to ensure stable aviation operation. Although the technical aspects such as the maintenance and inspection play a pertinent role, human errors are expected to have a similar or even larger influence on the aviation safety. Aviation maintenance and inspection tasks are often performed by a complex organization, in which individuals perform a variety of tasks in an environment involving time pressure, sparse feedback, and complex conditions. These situational characteristics, combined with the general tendency of human error, may lead to various types of errors, which may have critical consequences such as accidents and loss of life. For instance, if an amber message "IAS DISAGREE" is displayed on the primary flight display while the aircraft is rolling on the runway to takeoff, the crew immediately performs a rejected takeoff operation and troubleshoots the air data system. This paper proposes alternative approaches to address the occurrence of defects due to the human factors involved in the practical processes of the air data system of commercial aircraft.