• 대한치과보철학회지
• /
• 제37권5호
• /
• pp.640-650
• /
• 1999

As an optimal quality of the restorations, there should be a least amount of seating discrepancy between the casting and abutment teeth. However, high viscosity of the cementing medium and its resulting thickness may prevent complete seating of the restoration. The use of die spacing material provides adequate internal relief for the cementing medium. The purpose of this study is to compare the thickness of three commonly used die spacing materials. Materials and Methods: Stone plates were fabricated and divided into 12 sections to be painted with die spacers. Tru-Fit, Whip-Mix and Belle do St. Claire die spacer which are commonly used in dental practice were tested in this study. Each die spacers were painted layer by layer according to the manufacturer's recommendation. The average thickness of each die spacers were measured with light microscope(${\times}100$) and compared between them. Results and Conclusions. A silver-colored Tru-Fit die spacer has the lowest value of thickness without statistical significance comparing with a gold-colored Tru-Fit die spacer and a gray layer of Whip-Mix die spacer has the highest value of thickness without any statistical significance comparing with Belle de St. Claire die spacer. Three and four layers of Tru-Fit die spacer and two layers of Whip-Mix and Belle de St. Claire die spacers seem to be in the acceptable range of thickness of 25 to $45{\mu}m$ for optimal seating of the restorations. The standard experimental design and method should be fur thor evaluated for more consistent and objective results.

• The Journal of Advanced Prosthodontics
• /
• 제1권3호
• /
• pp.118-123
• /
• 2009

STATEMENT OF PROBLEM. Proper proximal contact is important for maintaining and stabilizing the dental arch. However, the proximal contact strength (PCS) is not a constant value and can be affected by a variety of factors. PURPOSE. This study examined the influences of postural changes on the posterior PCS. MATERIAL AND METHODS. Twelve adults with a normal occlusion and had not undergone prosthetic treatment or proximal restoration were participated in this study. A metal strip was inserted into the proximal surface and removed at a constant velocity. The contact strength was measured in every contact point between canine to second molar in both arches. The PCSs were obtained initially in the upright position, secondly in the supine position and finally in the upright position again. All measurements were repeated after a 2 hour period. Statistical analysis was carried out using the Friedman test (P < .05). RESULTS. Generally, a decrease in PCS occurred when the posture was changed from the initial upright to supine position, while it increased when the posture was changed from the supine to upright position. A significant change was observed in all areas except for between the canine-first premolar in the maxilla and between the first molar-second molar in the mandible areas. CONCLUSION. The posterior PCS, which dentists generally believe to be a static feature of occlusion, is affected significantly by posture.

• Journal of Oral Medicine and Pain
• /
• 제20권1호
• /
• pp.195-204
• /
• 1995

The purpose of this study was to evaluate effect of head posture change on initial occlusal contacts through measuring the distances between initial occlusal contacts and maximum intercuspal position at different head posture. Two special devices were designed and constructed. Mandibular movement replicator was used to assess reliability of the K6 diagnostic system(MKG; Myo-tronic Inc, Seatle, USA) and head posture calibrator was used to maintain the constant head posture during experiment. We measured difference of distance between initial occlusal contact and maximum intercuspal position with MKG in upright, supine, 45 degrees extension, 30 degrees flexion, 30 degrees right and left bending postion of the head. The Frankfurt horizontal plane was used as a reference plane. 21 adults aged from 23 to 25 were selected, who have normal or class I molar relationship, and have no symptoms on TMJ and masticatory muscles, and have restorations less than 3 surfaces on each tooth, and have no other prosthetic restoration. The obtained results were as follows : The mean absolute distances between initial occlusal contact and maximum intercuspal postion were 0.39(0.18mm in the upright position, 0.65(0.37mm in the supine position, 0.59(0.33mm in the 45 degree extension, 0.70(0.53mm in the 30 degrees flexion, 1.12(1.10mm in the 30 degrees right bending and 1.94(0.67mm in the 30 degrees left bending of the head. The positions of the initial occlusal contacts have a tendency to locate anterior, left and inferior to maximal intercuspal position in upright position, posterior and inferior in supine position and 45 degrees extension, anterior and inferior in 30 degrees flexion, right and inferior in 30 degrees right bending, and left and inferior in 30 degrees left bending of the head. There were significant differences among the initial occlusal contacts in each head postures(P<0.0001). Therefore, we need to check initial occlusal contacts in the altered head posture during occlusal analysis and adjustment of occlusal appliance and dental occlusion for diagnosis and treatment of temporomandibular disorder.

• 구강회복응용과학지
• /
• 제18권2호
• /
• pp.113-118
• /
• 2002

Long bridge가 필요한 구강암종환자에게 자기공명영상을 촬영하여야 하는 경우, fiber reinforced polymer ceramics로 잠정보철물을 제작해준 경우 충분한 파절 저항성과 심미성을 얻을 수 있었다. 하지만, 여기에 대한 장기간의 연구와 관찰이 필요하리라 사료된다.

• 구강회복응용과학지
• /
• 제24권2호
• /
• pp.147-155
• /
• 2008

5세대 상아질 접착제인 Adper Single bond 2.0 (3M-ESPE, USA), 6세대 상아질 접착제인 Prompt L-pop (3M-ESPE, USA), AdheSE (Ivoclar Vivadent, Liechtenstein) 를 각 상아질 접착제당 30개의 건전한 소구치 및 대구치를 선정하여 협면과 설면에 5급와동을 형성하고 복합레진을 적용하였다. 이중 절반은 열순환을 시행하지 않고 나머지 절반은 열순환을 시행하였다. 이후 메틸렌 블루를 침투시켜 시약의 침투 정도를 측정한 후 통계분석하였다. 열순환을 시행하지 않은 군과 열순환을 시행한 군을 통틀어 열순환을 시행하지 않은 상아질 군에서만 Single Bond 2.0의 미세누출의 양이 Prompt L-Pop과 AdheSE에 비하여 높았고 (p <.05) 나머지 군에서는 모두 Single Bond 2.0의 미세누출의 양이 적었다. (p <.05) 열순환 이후에 미세누출의 양이 늘어난 군은 Prompt L-Pop과 AdheSE의 상아질 군이었다.

• 구강회복응용과학지
• /
• 제23권2호
• /
• pp.119-130
• /
• 2007

Purpose: This investigation was designed to estimate the flexure strength, density, and microstructure of the colored and uncolored zirconia oxide ceramics for fixed partial denture. Material and Methods: LAVATM All Ceramic(3M-ESPE, USA), Cercon Smart Ceramic(Dentsply, USA), and Z-match Ceramic(DentAim, Korea) were used for this study. All specimen was fabricated by ASTM C1161. After preparing $25{\times}2{\times}1.5mm$ of rectangular column and sitting rectangular column on universal test machine (UTM), external supporting point distance is 20.0 mm, internal supporting point distance is 10.0 mm. Specimen was loaded with 0.2 mm/min of cross head speed until fracture and at the time of broken of specimen, measuring loading value with PC software. Results: The results were obtained as follows: 1. Flexure strength of uncolored zirconia was higher than that of colored zirconia. 2. In uncolored zirconia, flexure strength of LAVATM Ceramic was more higher than the other ceramics, and it showed statistical difference between LAVATM Ceramic and Cercon Smart Ceramic (P<0.05). 3. In colored zirconia, flexure strength of LAVATM Ceramic was more higher than the other ceramics too, but they did not show statistical difference (p>0.05). 4. In Weibull analysis, Characterastic strength was showed highest value to uncolored LAVATM Ceramic and lowest value to Z-match ceramic, and Weibull modulus(m) of uncolored zirconia was higher than that of colored zirconia. 5. In XRD analysis, all group except Z-match showed high peak of t-ZrO2 but they did not show m-ZrO2. Colored zirconia group showed lower peak of t-ZrO2 than that of uncolored zirconia group.

• 구강회복응용과학지
• /
• 제27권3호
• /
• pp.337-342
• /
• 2011

악안면 부위의 선천적 결손이나 외상성 손실, 종양의 외과적 절제 등에 의한 악골의 결손은 환자에게 저작 장애, 연하 장애 등의 기능적 문제와 발음장애 및 심미적 장애를 초래하게 된다. 이러한 장애를 줄여주고 손상된 조직과 기능을 회복시켜주기 위해 많은 경우 보철적인 수복을 필요로 하게 된다. 상악골에 결손부가 생긴 경우 음식물과 액체가 비강으로 새어나가고 이 결손부로 공기가 누출되어 과비음이 발생한다. 이런 경우에 구개 폐쇄 장치가 사용되는데, 이 장치는 상악의 결손부를 채우고 구강과 상악동 또는 비강과의 개통부를 차단하여 심미성을 증진시키고 기능을 회복시킨다. 본 증례의 환자는 우측 상악동에 편평상피세포 암종이 발생하여 상악골 부분 절제술을 시행한 환자로 구개 폐쇄 장치를 제작하여 장착한 후, 발음과 연하 등의 기본적 기능이 회복되었고 안모의 심미성이 증가하였다.

• 구강회복응용과학지
• /
• 제27권3호
• /
• pp.305-316
• /
• 2011

균열치는 저작운동과 온도자극에 대한 치아의 통증을 호소하는 환자에서 자주 발견되는 질환으로 균열의 진행정도에 따라 다양하게 분류할 수 있다. 가장 흔한 원인으로는 저작과정 중의 갑작스러운 사고로 알려져 있지만 대부분 증령, 기존 수복물 또는 의원성 응력집중과 같은 기여요인이 있을 때 발생한다. 균열의 진행정도 및 치수침범에 대한 정확한 진단이 필수적이며 저작시 통증을 확인한 후 균열을 가급적 눈으로 확인하는 것이 좋다. 이를 위해 투과광이나 염색과 같은 보조적 방법을 이용할 수 있다. 치료는 즉각적인 통증완화를 위한 교합조정이나 파절편 고정이 필요하며 치수의 상태에 따라 근관치료가 추가적으로 필요할 수도 있다. 궁극적인 치료로는 복합레진이나 접착 아말감으로 균열부위에 가해지는 충격을 완화시킨 후 주조수복물을 이용한 교두보호가 필요하다. 이 논문에서는 균열치에 대한 다양한 원인, 치료, 예후 등에 관한 문헌을 고찰할 것이다.

• 대한치과보철학회지
• /
• 제30권1호
• /
• pp.15-24
• /
• 1992

The purpose of this study was to analyze the mandibular asymmetry of the patients with the temporomandibular dysfunction. In this study, 20 dental students aged between 22 and 27 years, Chosun University, who did not possess any restoration and symptoms like the temporomandybular joint click, pain, and opening limitation of the mandible were selected as the normal group. And 80 patients who were analyzed into the patients with the temporomadibular dysfunction(TMD) were divided into group I as the internal derangement and group II as external derangement. Both the normal group and the TMD Group were faked submento-vertex cephalogram by routine methods after that the unilateral mandibular length(L) and the amount of mandibular asymmetry and deviation were measured and analyzed. The results were as follows : 1, Unilateral mandibular length(L) of the normal group and the TMD group were $112.7{\pm}10.20mm\;and\;102.65{\pm}8.10mm$ respectively (P<0.01). 2. The amount of mandibula asymmetry of the normal group and the TMD group were $5.95{\pm}4.63mm\;and\;5.68{\pm}4.35mm$ respectively (P<0.5). 3. The amount of mandibular deviation of the normal group and the TMD group were $6.00{\pm}4.07\;and\;4.67{\pm}3.40mm$ respectively (P<0.3). 4. In the TMD group, unilateral mandibular length(L) in the affected site and the non-affected site were $102.73{\pm}8.68mm\;and\;102.53{\pm}7.68mm$ respectively (P<0.5).

• Journal of Periodontal and Implant Science
• /
• 제34권1호
• /
• pp.19-28
• /
• 2004

Tooth is the most important element in esthetic consideration on facial area. Tooth alignment which is in harmony with gingiva, lips, and face is also key element. The purpose of this study was to give a clinical discipline for restoration of gingival contour, which contains a ratio of maxillary 6 anterior teeth, research for gingival contour etc., in case of rehabilitation of maxillary anterior teeth. 300 Dankook university dental school students ,who is their twenties and free from periodontitis, participate in this study. The result was from each 70 males and females who had normal occlusion and tooth alignment. Length, width and length/width ratio of maxillary 6 anterior teeth were 0.74-0.81 in male, 0.81-0.84 in female. There was significant difference between male and female. The most deepest position of gingiva in maxillary central incisor and canine was located in distal part of teeth and maxillary lateral incisor was middle portion. In maxillary central incisors, gingival line of the most deepest point appeared significant difference between male and female (p<0.01) whereas there was no difference in lateral incisors and canines. Distance between interdental papilla apex and the most deepest portion appeared significant difference between male and female. Distance of the deepest position of gingiva is statistically significant except maxillary central incisors and lateral incisors. Standard deviation and mean of the width of labio-lingual were measured in cervical area and there was a significant difference both male and female.(p<0.01) From this result, we could get the mean of maxillary anterior gingival line and these results have great value in clinical guidance in studying maxillary anterior teeth.