• 대한치과교정학회지
• /
• 제44권5호
• /
• pp.229-235
• /
• 2014

Objective: The aim of this study was to assess artifacts induced by metallic restorations in three-dimensional (3D) dental surface models derived by cone-beam computed tomography (CBCT). Methods: Fifteen specimens, each with four extracted human premolars and molars embedded in a plaster block, were scanned by CBCT before and after the cavitated second premolars were restored with dental amalgam. Five consecutive surface models of each specimen were created according to increasing restoration size: no restoration (control) and small occlusal, large occlusal, disto-occlusal, and mesio-occluso-distal restorations. After registering each restored model with the control model, maximum linear discrepancy, area, and intensity of the artifacts were measured and compared. Results: Artifacts developed mostly on the buccal and lingual surfaces. They occurred not only on the second premolar but also on the first premolar and first molar. The parametric values increased significantly with increasing restoration size. Conclusions: Metallic restorations induce considerable artifacts in 3D dental surface models. Artifact reduction should be taken into consideration for a proper diagnosis and treatment planning when using 3D surface model derived by CBCT in dentofacial deformity patients.

• 치위생과학회지
• /
• 제14권4호
• /
• pp.461-467
• /
• 2014

본 연구는 치위생과 대학에서 이루어지고 있는 치위생과정 실습에서 3학년 학생들이 대상자의 치아상태를 Q-ray view를 사용하지 않고 평가한 방법과 Q-ray view를 사용하여 평가한 방법을 숙련된 검사자의 치아검사결과를 기준치로 하여 부위별, 병소 및 수복물별 일치도를 비교하였다. 부위별 차이에서 병소와 수복물은 Q-ray view를 사용한 경우에 높은 일치도를 나타냈다. 특히 상악전치부는 수복물에서 100% 정답기준과 일치하였다. 병소 및 수복물별 차이에서 Q-ray view를 사용한 경우 병소에서는 치아우식증과 초기우식증, 치아파절에서 차이가 있었고 수복물에서는 수복물 또는 치면열구전색이 없는 경우와 심미수복물에서 유의한 차이가 있었다. 본 연구의 결과 Q-ray view를 병행해서 치아검사를 수행했을 때 경험이 부족한 치위생과 학생의 치아검사 신뢰성이 향상되었다. 따라서 치위생과정 실습에서 Q-ray view는 학생의 치아검사역량 증진에 효과적인 도구로 활용될 수 있을 것이다.

• 한국치위생학회지
• /
• 제14권5호
• /
• pp.617-622
• /
• 2014

With the explosive increase of esthetic demands by patients, many dental materials for the esthetic restoration have been introduced. Recently, zirconia based restorations are using for the cases of single crown, bridges, implant prostheses etc. Zirconia have superior mechanical properties and biocompatibility. Owing to the properties of high strength, zirconia has to be manufactured by CAD/CAM system. Dental CAD/CAM system is a futuristic treatment and technical system which makes it possible to produce the precision and uniform prosthesis and also standardize the treatments. This article introduces the characteristics of zirconia, fabrication procedure using CAD/CAM system and procedure for the cementation of zirconia based restoration.

• Journal of Oral Medicine and Pain
• /
• 제23권2호
• /
• pp.193-209
• /
• 1998

In identifying bodies that are severely decayed or damaged, methods using fingerprints and various biochemical tests are known to have its limits. To overcome this, forensic odontological method which is based on the analysis of the cranium, tooth and dental restoration is used to enhance the accuracey of individual identification. For this reason, I have come to analysis of the dental materials that exists between the teeth that is perceived to have been previously restored and the one adjacent to it. By analyzing the constituents of gold crown-restored, non-precious metal-restored, gold inlay-restored and amalgam -restored teeth, and adjacent teeth using EDX(energy dispersive X-ray microanalysis) which was invented to analyze very small amount of elements, the nature of the restoration could be predicted and the results obtained were as follows. 1. Some of constitute of gold alloy was extracted from residual cement of gold crown restoration, but that was not extracted from the restored tooth and the one adjacent to it. 2. Some of constituents of non-precious metal alloy was extracted both in the residual cement on the tooth with no-precious metal restoration and in the tooth with the restoration itself. However, none of its constituents were found in the tooth adjacent to it. 3. Some of constituents of gold alloy were found in the residual cement of gold inlay, but they were not found in the restored tooth and the adjacent tooth. 4. Some of constituents of amalgam alloy were found both in tooth restored with amalgam and in the adjacent tooth. From the results obtained above, it is possible to utilize the data obtained from analyizing residual dental materials in a more effective way. This data compensates for the lost data due to any harm done to the restorations prior to individual identification and further enhances the accuracy. Therefore, it could be concluded that this process of analyzing residual dental materials could be beneficial to individual identification in the area of forensic odontoldogy.

• 한국콘텐츠학회논문지
• /
• 제13권7호
• /
• pp.333-338
• /
• 2013

본 연구의 목적은 해외 치과기공물 서비스 수출을 연구하는 것으로서, 우리나라 및 해외 치과기공물 서비스의 현황분석, 그리고 해외 진출 시 문제점과 진출 전략을 제시하였다. 세계화와 정보화 추세의 진전으로 의료서비스시장 규모가 점점 커지고 있으며, 의료 서비스시장은 질이 가장 중요시 되는 고부가가치의 서비스산업이라는 새로운 인식하에 시장 개발과 고용창출을 이루려는 각국의 노력과 함께 급부상하며 유망산업분야로 떠오르고 있다. 고부가가치의 의료서비스 산업을 해외 시장으로 확장 발전시키기 위하여, 결론적으로 첫 번째 의료서비스의 해외진출과 글로벌화 강화, 두 번째는 전문화를 통한 의료서비스의 고급화, 마지막으로 전문경영체제 구축 및 의료 서비스 시스템 혁신이 필요하다.

• Journal of Periodontal and Implant Science
• /
• 제41권6호
• /
• pp.302-308
• /
• 2011

Purpose: The emergence profile concept of an implant restoration is one of the most important factors for the esthetics and health of peri-implant soft tissue. This paper reports on two cases of gingival recontouring by the fabrication of a provisional implant restoration to produce an optimal emergence profile of a definitive implant restoration. Methods: After the second surgery, a preliminary impression was taken to make a soft tissue working cast. A provisional crown was fabricated on the model. The soft tissue around the implant fixture on the model was trimmed with a laboratory scalpel to produce the scalloped gingival form. Light curing composite resin was added to fill the space between the provisional crown base and trimmed gingiva. After 4 to 6 weeks, the final impression was taken to make a definitive implant restoration, where the soft tissue and tooth form were in harmony with the adjacent tooth. Results: At the first insertion of the provisional restoration, gum bleaching revealed gingival pressure. Four to six weeks after placing the provisional restoration, the gum reformed with harmony between the peri-implant gingiva and adjacent dentition. Conclusions: Gingival recontouring with a provisional implant restoration is a non-surgical and non-procedure-sensitive method. The implant restoration with the optimal emergence profile is expected to provide superior esthetic and functional results.

• The Journal of Advanced Prosthodontics
• /
• 제2권2호
• /
• pp.46-49
• /
• 2010

BACKGROUND. Though implant dentistry is very successful and predictable in treatment of patients with destroyed dentition, there are some cases with limitations to implant therapy. In these cases, alternative treatment modality should be considered. CASE DESCRIPTION. A patient with destroyed dentition was rehabilitated with a lateral rotational path removable partial denture. According to the diagnosis, we determined to raise vertical dimension for esthetic and functional restoration. The final restoration was performed after four months of provisional period. CLINICAL IMPLICATION. The edentulous patients with compromised esthetics and functions can be successfully treated with a rotational path removable partial denture through adequate treatment planning and precise laboratory procedure.

• 대한치과의사협회지
• /
• 제26권9호통권232호
• /
• pp.785-791
• /
• 1988

• Restorative Dentistry and Endodontics
• /
• 제43권1호
• /
• pp.9.1-9.6
• /
• 2018

The objective of this case report is to introduce a simple technique for simultaneously taking a closed-mouth impression and functionally generated path (FGP) for a full coverage crown restoration. A monolithic zirconia crown was the restoration of choice. An alginate impression of the abutment tooth was taken to fabricate a custom-made closed-mouth impression tray covering the abutment tooth and the adjacent teeth. The tray had an FGP table and an abutment tray in cameo and intaglio surfaces, respectively. The impression was taken with silicone impression material after adjusting the abutment tray and inscribing the FGP using self-curing acrylic resins. Plaster casts were made from the impression, and a zirconia crown was fabricated. The crown was cemented to the abutment tooth with minimal adjustments. This simple technique resulted in a well-fitting crown that accounted for mandibular movements. Using the custom closed-mouth impression tray incorporating an FGP table simultaneously aids in fabricating an accurately fitting restoration that incorporates harmonious mandibular movements using a single impression capture.

• 대한치과의사협회지
• /
• 제40권8호통권399호
• /
• pp.592-597
• /
• 2002