• Journal of Oral Medicine and Pain
• /
• v.6 no.1
• /
• pp.101-110
• /
• 1981

For the purpose of an estimation of age based on the changes in the human dental cavity caused by increase in age, 1,208 extracted teeth in the parts from central incisors and lateral incisors and lateral incisors to second premolars of upper and lower, right and left side were evaluated and analized all of surface index of pulp cavity. The results are as follows : 1. The surface index of pulp caxities of upper and lower, central and lateral incisors, and tend to decrease regularly as the age increase. So above teeth are more applicable to age estimation than canine and premolars. 2 For the purpose of age estimation by surface index of pulp cavity of central and lateral incisor, linear equations are as follows. Upper central incisor: X=(16.301-Y)/0.12 Upper lateral incisor: X=(16.620-Y)/0.11 Lower central incisor: X=(20.963-Y)/0.16 X=Age Y=Surface index of pulp cavity Correlation coefficient between chronologic age and estimated age is 0.699 3.The least error(3.3 yrs of age)reveals in 41-45 age group, which shows the highest possibility of estimation of age. The highest error(4.1 yrs of age)reveals in 61-65 age group and 56-60 age group.

• The Journal of the Korean dental association
• /
• v.12 no.3
• /
• pp.195-198
• /
• 1974

The purpose of this study is to obtain the histopathological change of dentin and pulp when the prepared cavity is exposed to oral fluid without protection. The results were as follows: 1. Hyperemia of pulp blood vessel and round cell infiltration in odontoblast layer observed on the one week experimental dogs. 2. Marked edematous change, round cell infiltration, fibrotic change and prolif eration of collagenous fiber showed on the 8 week experimental dogs. 3. Prepared cavity should be protected by the biologically accepted lining mater ials regardless of cavity depth.

• The Journal of the Korean dental association
• /
• v.56 no.10
• /
• pp.572-580
• /
• 2018

Adequate access cavity is the key to achieving endodontic success. The aims of the access cavity can be considered as follows: 1) Creation of a smooth unimpeded pathway for instruments to canal orifices 2) Removal of the entire roof of the pulp chamber in order to inspect the pulp floor, 3) Preservation of natural tooth substance consistent with the above. Recently, contracted endodontic cavities based on minimally invasive endodontics has introduced. This has the benefit of preserving the pericervical dentin more than traditional access cavity with achieving long-term success. However, some studies reported controversial results regarding root canal detection, instrumentation efficacy (noninstrumented canal area, hard tissue debris accumulation, canal transportation, and centering ratio) as well as fracture resistance. Therefore, further studies are required for accepting contracted access cavity, and modified form of traditional and contracted access cavity could be considered.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.3
• /
• pp.583-597
• /
• 1998

The purpose of this study was to evaluate temperature change occurred in enamel, dentin and pulp due to the heat from cavity prepration with laser. We made three models had different cavity depth: cavity depth of model A was 3.52mm, model B was 2.32mm, model C was 1.16mm. We irradiated cavity base with thermal capacity of $30J,100J,300J/cm^2s$ during few seconds and studied the change of temperature in tooth during 10 seconds, and estimated change of thermal capacity by different irradiated site and exposure time. At $300J/cm^2$ irradiation for 2 seconds, the temperature of irradiated surface was elevated fast according to irradiated thermal energy during 1 second. In proportion to continuous exposure time, temperature elevated slowly. The surface temperature was $1370^{\circ}C$. After discontinue of thermal irradiation, the heat of irradiated surface was diffused in dentin and pulp and the greatest temperature was made. The greatest temperature was disappeared within 10 seconds The greatest temperature of the inner part of model brought about very severe change by different depth. Temperature in pulp was raised by the greater irradiated energy density and exposure time.

• The Journal of the Korean dental association
• /
• v.11 no.3
• /
• pp.185-189
• /
• 1973

Dental amalgam in the clinic practice of dentistry is one of the most important materials. Mercury, one of the component of this alloy, is emitted in the form of vapor after filling as long as 5 days Silver particles penetrate into the dentine deeply along the tubles underneath cavity floor. To determine the permeability of mercury in the teeth following experiments were performed. Class 5 cavities total 40 from 10 dogs were prepared on upper and lower canines and amalgam alloys which contain about 10uCi of radioactive mercury were inserted. The animals were sacrificed 7 days after the experiments and the teeth were decalcified, sectioned and autoradiographed by means of emulsion and stained by H & E. Following are the results obtained from this experiments. 1. Blackened silver grains were found along the dentinal tubules underneath the cavity floor. Beyond the border of dentine and pulp chamber grains were seen in odontoblastic layer (Fig. 1, 2, 3, 4) 2. Underneath the odontoblastic layer, the pulp tissue showed almost normal appearance except slight dilatation of blood vessel.

• Journal of Korean Dental Science
• /
• v.4 no.1
• /
• pp.1-5
• /
• 2011

Purpose: Exact knowledge of the location and dimension of the pulp chamber help to maintain the pulp healthy during operative procedure and also reduces the risk of perforation of pulp chamber during root canal treatment. This in-vivo study was carried out to measure critical morphology of pulp chamber of mandibular molar using intra-oral periapical radiograph. Materials and Methods: Mandibular molar teeth of 56 patients were evaluated. The mandibular molar teeth whose pulp chamber was not violated by caries, restoration, fracture crown and those having closed apex were included in the study. The intraoral periapical radiographs were taken with paralleling angle technique using radio-opaque grid with 1 mm space. This grid was placed directly on the film. Results: In 94% of the mandibular first molars specimens the pulp chamber ceiling was at the level of the cemento-enamel junction. The measurements showing the lowest percentage variance were buccal cusp to furcation (approximately 11%) and buccal cusp to pulp chamber ceiling (approximately 15%). The distance from the cusp tip to pulp chamber ceiling height was approximately 6.0 mm, the distance from the pulpal floor to the furcation was approximately 3.0 mm, and the average height of a pulp chamber was 1.5 to 2.0 mm. Conclusion: The exact knowledge of distances of pulp chamber from various anatomical landmarks helps in proper assessment of root canals and ultimately avoids the failure of root canal treatment.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.1
• /
• pp.11-17
• /
• 2008

The purpose of this study was to investigate early histological changes and calcitonin gene-related peptide (CGRP) expression in the dental pulp of the rat after Er:YAG laser preparation. Occlusal cavities were prepared in the upper first molars using either Er:YAG laser and conventional bur. At 48 hours after cavity preparation, the teeth were processed for hematoxylin-eosin stain and CGRP immunohistochemistry. The results were as follows : 1. The cavity floor by Er:YAG laser preparation was more irregular shape compared with those by bur preparation and there are some cracks in the directions of dentinal tubules. 2. There were more inflammatory cell infiltration and disruption of odontoblast in the dental pulp by Er:YAG laser preparation in comparison with the dental pulp by bur preparation. 3. CGRP expression in the pulp tissue by both Er:YAG laser and bur preparations were increased and higher than in the normal pulp. The expression pattern of CGRP was more strong in the pulp by Er:YAG laser preparation. These results indicate that Er:YAG laser is useful in the operative dentistry such as caries removal and cavity preparation if properly applied.

• Proceedings of the KACD Conference
• /
• 2003.11a
• /
• pp.581-581
• /
• 2003

The purpose of this study was to search non-invasive and reproductive pulp test. Temperature of the crown surface was measured using the infrared thermography, and the pulp test was investigated with difference of crown temperature of the vital and the non-vital tooth in vitro and in vivo. Twenty extracted human maxillary central incisors were used in this study. Two sample teeth after access cavity preparation were arranged setting with one pair. Then, the each tooth wes estimated as the vital and the non-vital tooth.(중략)

• Restorative Dentistry and Endodontics
• /
• v.41 no.3
• /
• pp.202-209
• /
• 2016

Objectives: The purpose of this study was to investigate the involvement of TRPA1 in the cinnamaldehyde-induced pulpal blood flow (PBF) change in the feline dental pulp. Materials and Methods: Mandibles of eight cats were immobilized and PBF was monitored with a laser Doppler flowmetry at the mandibular canine tooth. To evaluate the effect of cinnamaldehyde on PBF, cinnamaldehyde was injected into the pulp through the lingual artery at a constant rate for 60 seconds. As a control, a mixture of 70% ethanol and 30% dimethyl sulfoxide (DMSO, vehicle) was used. To evaluate the involvement of transient receptor potential ankyrin 1 (TRPA1) in PBF change, AP18, a specific TRPA1 antagonist, was applied into the pulp through the Class V dentinal cavity followed by cinnamaldehyde-administration 3 minutes later. The paired variables of experimental data were statistically analyzed using paired t-test. A p value of less than 0.05 was considered as statistically significant. Results: Administration of cinnamaldehyde (0.5 mg/kg, intra-arterial [i.a.]) induced significant increases in PBF (p < 0.05). While administration of a TRPA1 antagonist, AP18 (2.5 - 3.0 mM, into the dentinal cavity [i.c.]) caused insignificant change of PBF (p > 0.05), administration of cinnamaldehyde (0.5 mg/kg, i.a.) following the application of AP18 (2.5 - 3.0 mM, i.c.) resulted in an attenuation of PBF increase from the control level (p < 0.05). As a result, a TRPA1 antagonist, AP18 effectively inhibited the vasodilative effect of cinnamaldehyde (p < 0.05). Conclusions: The result of the present study provided a functional evidence that TRPA1 is involved in the mechanism of cinnamaldehyde-induced vasodilation in the feline dental pulp.

• Restorative Dentistry and Endodontics
• /
• v.21 no.2
• /
• pp.451-469
• /
• 1996

The purpose of this study was to investigate the effect of calcium hydroxide and glass ionomer cement fillings on the levels of $LTB_4$ and $LTC_4$ in experimentally inflamed rat dental pulp. The dental pulp in the mandibular incisor of wistar rat was irritated by cutting a 5mm deep hole in the dentin with a twist drill bur of 0.5mm diameter, without cooling. The cavities were filled with calcium hydroxide(light-cured) and glass ionomer cement(light cured). The untreated pulp served as control tissue specimen. After cavity preparations, the rat with or without various treatment were sacrificed in various time by decapitation. The dental pulp tissue were carefully removed and the concentrations of $LTB_4$ and $LTC_4$ were determined by radioimmunoassay. And pulps were examined histologically to observe inflammatory feature. The result were obtained as follows : 1. The inflammatory features of pulps were observed microscopically in all experimental groups. And degree of inflammation was decreased with time. 2. The concentrations of $LTB_4$ and $LTC_4$ for all experimental groups were significantly higher than those for control group 6 hours after cavity preparation(p<0.05). 3. The group filled with calcium hydroxide was the lowest, and the group filled with glass ionomer cement, the group of irritation in that order showed increased concentrations of $LTB_4$ and $LTC_4$ 6 hours after cavity preparation. In the concentrations of $LTB_4$, significant differences among 3 groups were noted(p<0.05). 4. The group filled with calcium hydroxide was the lowest, and the group filled with glass ionomer cement, the group of irritation in that order showed increased concentrations of $LTB_4$ and $LTC_4$ 24 hours after cavity preparation. And there were statistically significant difference in concentrations of $LTB_4$ between the group of irritation and the group filled with calcium hydroxide(p<0.05). 5. The group filled with calcium hydroxide was the lowest, and the group filled with glass ionomer cement, the group of irritation in that order showed increased concentrations of $LTB_4$ and $LTC_4$ 48 hours after cavity preparation. But no statistically difference was found (p>0.05). 6. The concentrations of $LTB_4$ and $LTC_4$ in all experimental groups were highest level at 6 hour after experiment and decreased as time progresses(correlation coefficient>0.8).