• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제28권2호
• /
• pp.95-102
• /
• 2002

DM is a systemic disease with many complications. One of them, diabetic osteopenia is important sequelae and many authors reported reduced bone mass in diabetic rats. However, in mandible, study has been rare because of its anatomical limits. So the objective of this study was to investigate bony change in mandible of diabetic rats. Thirty-two adult rats were used in this study. Half of them were male and female respectively. In sixteen rats, streptozotocin was injected intraperitoneally to induce DM and the serum glucose concentration was checked to ensure the induction of DM prior to the time of sacrifice. At 1, 2, 3, 4, 6, 8, 12, 16weeks, control group and diabetic group rats were sacrificed respectively. And then bone mineral density of mandibles and femurs of the rats was measured using dual energy X-ray absorptiometry(DEXA). In addition serum osteocalcin and urine deoxypyridinoline were measured as markers of bone formation and resoption respectively. Mandibular and femoral bone density in streptozotocin induced rats was decreased with significance statistically after 4 weeks from injection. In mandible, comparing with femur, bone density was moderately decreased. The alveolar bone in mandible was more decreased bone density than the whole body in the mandible From these results, bone mineral density decreased in uncontrolled diabetic group with time, and especially alveolar bone was more destructive in the mandible. So authors think that consideration of reduced bone mineral density is necessary in dental procedure.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제46권4호
• /
• pp.250-257
• /
• 2020

Objectives: Palatal infiltration is the most painful and uncomfortable anesthesia technique for maxillary impacted third molar surgery (MITMS). This approach could cause patients distress and aversion to dental treatment. The aim of this study was to evaluate the anesthetic efficacy of a buccal infiltration injection without a palatal injection in MITMS. Materials and Methods: This prospective research study was a crossover split mouth-randomized controlled trial. Twenty-eight healthy symmetrical bilateral MITMS patients (mean age, 23 years) were randomly assigned to two groups. Buccal infiltration injections without palatal injections were designated as the study group and the buccal with palatal infiltration cases were the control group, using 4% articaine and 1:100,000 epinephrine. The operation started after 10 minutes of infiltration. Pain assessment was done using a visual analogue scale and a numeric rating scale after each injection and extraction procedure. Similarly, the success rate, hemodynamic parameters, and additional requested local anesthetic were assessed. Results: The results showed that the pain associated with local anesthetic injections between both groups were significantly different. However, the success rates between the groups were not significantly different. Postoperative pain was not significant between both groups and a few patients requested an additional local anesthetic, but the results were not statistically significant. For hemodynamic parameters, there was a significant difference in systolic pressure during incision, bone removal, and tooth elevation. In comparison, during the incision stage there was a significant difference in diastolic pressure; however, other steps in the intervention were not significantly different between groups. Conclusion: We concluded that buccal infiltration injection without palatal injection can be an alternative technique instead of the conventional injection for MITMS.

• The Journal of Advanced Prosthodontics
• /
• 제8권6호
• /
• pp.417-422
• /
• 2016

PURPOSE. The purposes of this study were to evaluate the staining resistance of CAD/CAM resin-ceramics polished with different techniques and to determine the effectiveness of the polishing techniques on resin-ceramics, comparing it with that of a glazed glass-ceramic. MATERIALS AND METHODS. Four different CAD/CAM ceramics (feldspathic ceramic: C-CEREC Blocs, (SIRONA) and three resin-ceramics: L-Lava Ultimate, (3M ESPE), E-Enamic, (VITA) and CS-CeraSmart, (GC)) and one light cure composite resin: ME-Clearfil Majesty Esthetic (Kuraray) were used. Only C samples were glazed (gl). Other restorations were divided into four groups according to the polishing technique: nonpolished control group (c), a group polished with light cure liquid polish (Biscover LV BISCO) (bb), a group polished with ceramic polishing kit (Diapol, EVE) (cd), and a group polished with composite polishing kit (Clearfil Twist Dia, Kuraray) (kc). Glazed C samples and the polished samples were further divided into four subgroups and immersed into different solutions: distilled water, tea, coffee, and fermented black carrot juice. Eight samples ($8{\times}8{\times}1mm$) were prepared for each subgroup. According to CIELab system, four color measurements were made: before immersion, immersion after 1 day, after 1 week, and after 1 month. Data were analyzed with repeated measures of ANOVA (${\alpha}=.05$). RESULTS. The highest staining resistance was found in gl samples. There was no difference among gl, kc and cd (P>.05). Staining resistance of gl was significantly higher than that of bb (P<.05). Staining resistances of E and CS were significantly higher than those of L and ME (P<.05). CONCLUSION. Ceramic and composite polishing kits can be used for resin ceramics as a counterpart of glazing procedure used for full ceramic materials. Liquid polish has limited indications for resin ceramics.

• 대한소아치과학회지
• /
• 제26권4호
• /
• pp.623-629
• /
• 1999

근막극(fascial space)이란 느슨한 결체조직으로 채워진 근층(fascial plane)사이에 존재하는 잠재적인 공간으로 두개악안면 부위에는 복잡한 해부학적 구조와 근육들에 의해 많은 근막 간극이 존재한다. 이들 근막극은 두개악안면부위에 감염이 존재할 경우 일반적으로 근층에 의하여 자연적으로 감염의 확산이 제한되기도 하지만, 감염의 정도가 심한 경우에는 이러한 근층이 파괴되어 감염이 인접 근막 간극으로 전파되는 자연적인 통로가 되며 이로 인해 안면과 경부의 심층까지 감염이 확산되기도 한다. 치성감염이 연조직내로 침투하면 결체조직을 통하여 그리고 근막극을 따라 최소저항의 방향으로 확산되므로 염증은 치성 원인에서 먼 곳까지 파급될 수 있고 심지어는 생명까지도 위험하게 된다. 두경부 연조직의 감염은 현대에는 다양한 항생제가 발달되어 치료에 도움을 주고 있으나, 조기에 적절한 치료가 이루어지지 않을 경우에는 기도폐쇄, 균혈증, 뇌농양, 혈전성 정맥염 등의 심각한 합병증을 야기할 수 있으므로 이들에 대한 조기진단과 적극적인 치료가 필요하겠다. 본 증례에서는 두경부 악안면 근막극 농양환아에 있어서 근관내 배농을 통하여 치료한 바 외과적 술식을 이용한 치료에 비하여 다음과 같은 잇점이 있는것으로 평가되어 이에 보고하는 바이다. 1) 입원을 피함으로서 환자의 경제적 부담 감소 2) 시술의 편의성 3) 환아의 공포감 조성 방지

• 구강회복응용과학지
• /
• 제23권4호
• /
• pp.269-281
• /
• 2007

Fluoric acid etching is an essential procedure in cementation of reinforced ceramics to tooth surface. But there have been few studies about the changes of surface structure and flexural strength of IPS $Empress^{(R)}$ 2 ceramic according to the etching time. The objectives of this study were to examine the surface structure changes and the difference in biaxial flexural strength of IPS $Empress^{(R)}$ 2 ceramic according to various etching times. Sixty one disk-shaped specimens of IPS $Empress^{(R)}$ 2 ceramic($14mm{\times}1.2mm$) were fabricated for the biaxial flexural strength test and SEM analysis according to the manufacturer's recommendations. Sixty specimens were divided into 6 groups(n=10) according to the time of HF acid etching(0, 20, 180 and 300s)and silane/resin cement application. Each disk was loaded using a piston-on-3 ball biaxial configuration in a universal testing machine. The failure loads(N) were recorded, and the biaxial flexural strength for each disk was calculated. A one-way analysis of variance and independent t-test on transformed fracture strength data were used to determine significant differences between groups. The groups of no cementation showed a trend toward progressive weakening with increasing the etching time. However, this was not statistically significant at p=0.05 level. The groups of resin cementation exhibited no apparent trend in their mean strength values. SEM photomicrographs showed very different results of etching. Within the conditions of this study, alteration of surface topography by acid etching does not have a deleterious effect on the biaxial flexural strength of IPS $Empress^{(R)}$ 2 ceramic.

• 구강회복응용과학지
• /
• 제30권4호
• /
• pp.315-323
• /
• 2014

과도한 치아의 마모는 수직 교합 고경의 감소를 야기하여 구강 및 저작계의 병적 변화를 일으킬수 있으며, 이 경우 새로운 교합 설정과 수직 고경 회복 시 정확한 진단과 분석이 필수적이다. 이에 본 증례에서는 고딕 아치 트레이서를 통해 거상된 수직고경에서의 중심위를 기록한 후 전악 수복을 시행하였다. 본 증례는 70세 남자 환자로서 이가 시리고 아파서 음식을 먹지 못한다는 주소로 내원하였다. 전반적인 치아 마모에 의한 수직고경의 감소를 보여 면밀한 모형분석을 통해 수직고경의 거상을 결정하였다. 거상된 수직고경에 맞춰 고딕 아치 트레이서를 이용하여 중심위 채득 후 임시 보철물을 장착하였다. 4개월 동안 임시 보철물을 통해 적절한 교합을 형성하였으며 이를 이용하여 최종 보철을 제작하였다. 치료를 통해 기능적, 심미적으로 만족할 만한 결과를 얻었기에 이를 보고하는 바이다.

• Restorative Dentistry and Endodontics
• /
• 제10권1호
• /
• pp.169-175
• /
• 1984

This study was undertaken to obtain the average canal length of upper & lower anterior teeth which was important in canal length measuring procedure of endodontic treatment. It was based upon 827 out-patients who had endodontic treatment on their upper & lower anterior teeth at the Department of Operative Dentistry, Dental Infirmary, Yonsei Medical Center from February, 1978 to June, 1984. The 1249 teeth of these patients were devided into sex and age groups. The root canal length of these teeth were measured. The following results were obtained; 1. The mean root canal length of upper & lower anterior teeth were as follows; Upper central incisors : 21.8mm Upper lateral incisors : 21.0mm Upper canines : 24.1mm Lower central incisors : 18.6mm Lower lateral incisors : 19.9mm Lower canines : 22.6mm 2. There was no significant difference in root canal length between sex. (P > 0.05) 3. There was no significant difference in root canal length between age groups. (p > 0.05) 4. The distribution of upper central incisors showed the highest distribution followed by upper lateral incisors and lower central incisors between 10 to 40 year old age groups, and there was no signigicant difference in the rest of the age groups. There was no significant difference in sex distribution, which was 49.5% for males and 50.4% for females. The number of the upper anterior teeth was 74.3% of all the specimens and the lower anterior 25.7%, and 40.6% of all the specimens were upper central incisors.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제34권6호
• /
• pp.440-448
• /
• 2012

Purpose: The purpose of this study was to evaluate marginal bone loss of the alveolar crest on implants with or without guided bone regeneration and variables that have influenced. Methods: The clinical evaluation were performed for survival rate and marginal bone loss of 161 endosseous implants installed with guided bone regeneration (GBR) in 83 patients from September 2009 to October 2010 in relation to sex and age of patients, position of implant, implant system, length and diameter of implant. Study group (n=42) implant with GBR procedure, control group (n=41) implant without GBR technique. Simultaneous GBR approach using resorbable membranes combined with autogenous bone graft or freeze-dried bone allograft or combination. Radiographic examinations were conducted at healing abutment connection and latest visit. Marginal bone level was measured. Results: Mean marginal bone loss was 0.73 mm in study group, 0.63 mm in control group. Implants in maxillary anterior area (1.21 mm) were statistically significant in study group (P<0.05), maxillary posterior area (0.81 mm) in control group (P<0.05). Mean marginal bone loss 1.47 mm for implants with diameter 3.4 mm, 0.83 mm for implants of control group with diameter 4.0 mm (P<0.05). Some graft materials showed an increased marginal bone loss but no statistically significant influence of sex, implant type or length. Conclusion: According to these findings, this study demonstrated the amount of marginal bone loss around implant has maintained a relative stable during follow-up periods. We conclude that implants with GBR had similar survival rate and crestal bone level compared with implants in native bone.

• Imaging Science in Dentistry
• /
• 제33권1호
• /
• pp.35-41
• /
• 2003

Purpose: To aid in determining the volume of graft bone required before a maxillary sinus lift procedure and compare the alveolar bone height measurements taken by panoramic radiographs to those by CT images. Materials and Methods : Data obtained by both panoramic radiographs and CT examination of 25 patients were used in this study. Maxillary sinus volumes from the antral floor to heights of 5 mm, 10 mm, 15 mm, and 20 mm, were calculated. Alveolar bone height was measured on the panoramic images at each maxillary tooth site and corrected by magnification rate (PBH). Available bone height (ABH) and full bone height (FBH) was measured on reconstructed CT images. PBH was compared with ABH and FBH at the maxillary incisors, canines, premolars, and molars. Results: Volumes of the inferior portion of the sinuses were 0.55 ± 0041 ㎤ for 5 mm lifts, 2.11 ± 0.68 ㎤ for 10 mm, 4.26 ± 1.32 ㎤ for 15 mm, 6.95 ± 2.01 ㎤ for 20 mm. For the alveolar bone measurement, measurements by panoramic images were longer than available bone heights determined by CT images at the incisor and canine areas, and shorter than full bone heights on CT images at incisor, premolar, and molar areas (p<0.001). Conclusion: In bone grafting of the maxillary sinus floor, 0.96 ㎤ or more is required for a 5 mm-lift, 2.79 ㎤ or more for a 10 mm-lift, 5.58 ㎤ or more for a 15 mm-lift, and 8.96 ㎤ or more for a 20 mm-lift. Maxillary implant length determined using panoramic radiograph alone could result in underestimation or overestimation, according to the site involved.

• 대한치과보철학회지
• /
• 제38권4호
• /
• pp.544-551
• /
• 2000

A fabrication method of inner and outer crown using CAD/CAM is presented. The information of abutment teeth is transferred to a computer through a 3-dimensional scanner. A Konus inner and outer crown is designed on a computer and a real crown is machined based on this design using CAM. This method can save laboratory time and reduce inaccuracies compare to conventional casting procedure. A stone model with six prepared abutment teeth from a patient was used in this study. Three dimensional information from the model was transferred to a computer using a contact type 3-dimensional scanner with a $25{\mu}m$ accuracy. All margins were identified on a computer image where there is a change in surface taper of a model. To provide a cement space, the image of a inner sur face of a Konus inner crown was duplicated $25{\mu}m$ apart from the surface of a prepared abutment teeth image. The cement space was $20{\mu}m$ at the cervical margin. All Konus crowns were machined with a $10{\mu}m$ accuracy. It was concluded that this method can reduce working-time for the laboratory process and increase accuracy. A further research is required to make a simplified process for a more complex prosthesis.