• 대한치과의사협회지
• /
• 제56권5호
• /
• pp.254-262
• /
• 2018

Objectives: This study aimed to compare the postoperative pain and clinical performance after applying three different intracanal medicaments and root canal sealers. Materials and Methods: Sixty-five patients requiring root canal treatment due to symptomatic apical periodontitis were included in this study. After a glide path preparation by using PathFile, each canal was shaped with ProTaper Next file system. After the canal cleaning and shaping procedure, the canal was dried and each intracanal medicaments were adjusted (Calcipex II, TRC-paste, Metapaste). At the next visit, the patients were requested to answer the absence of the pain after the procedure. Once the patients showed no symptom, the canal was obturated with each corresponded root canal sealers (AH plus, Radic-sealer, ADseal). The patients were recalled after 1 week, 1, 3, and 6 months to check the postoperative pain or unexpected clinical signs. One-way ANOVA and Duncan's post hoc comparison, and Chi-square test were used for statistical analysis to evaluate any differences among tested materials. Results: The average number of visits for intracanal medication was 2.69, 2.65, and 2.61 for Calcipex II, TRC-paste, and Metapaste. There were no statistically differences in post-obturation pain among three groups obturated with different root canal sealers (P > 0.05). Conclusions: Under the limitations of this study, three tested intracanal medicaments and epoxy resin root canal sealers showed clinically acceptable similar results.

• 대한소아치과학회지
• /
• 제28권3호
• /
• pp.530-534
• /
• 2001

많은 치과 임상가들은 아말감을 치질에 접착시키기 위해서 여러 접착재료를 이용해왔다. 이 런 술식의 장점으로는 미세누출의 감소로 인한 술후과민증의 감소, 변연파절의 감소, 삭제 후 치질의 강화, 적은 유지형태에서의 수복물의 유지등이 제시되어 왔다. 실제로 임상적 상황에서 이러한 술식의 장점을 확인할 필요가 있다. 이런 접착제가 임상적 환경에서 어떠한 잇점을 보이지 않는다면 시간과 비용을 낭비하는 이런 술식을 정당화하지 못할 것이다. 본 연구에서는 73개의 치아를 대상으로 하여 I급 와동과 II급 와동에 접착형과 비접착형 아말감으로 수복하였다. 접착제로는 Fuji I Glass Ionomer luting cement를 이용하였다. 평균 2년 후에 변연적합성을 평가하였으나 접착형 아말감과 비접착형 아말감 사이에 유의한 차이는 없었다.

• 한국수정란이식학회지
• /
• 제25권2호
• /
• pp.97-101
• /
• 2010

Intracytoplasmic sperm injection (ICSI) is one of the artificial fertilization methods when only a few sperm are available for insemination, and an important tool for the preservation of genetic materials of endangered animal species, especially the male is infertile. Different from other species such as mice and pigs, the conventional ICSI method which uses spiked pipette for injection (Spike-ICSI) is exhibited low success rates in cattle because the bovinesperm head membrane is hard to break during injection procedure. We chose piezo-assisted ICSI (Piezo-ICSI) for the improvement of the injection procedure including sperm head membrane rupture and efficient puncture of the plasma membrane of the oocytes. In this experiment, we compared the efficacy of the bovine ICSI embryo production between the Piezo-ICSI and Spike-ICSI. The second polar body extrusion, pronuclear formation, cleavage and blastocyst formation were evaluated after implementation of two different ICSI techniques. The Piezo-ICSI tended to show comparably higher rates of the second polar body extrusion (41.7%), the pronuclei formation (42.9%) and the two-cell cleavage (41.4%) than Spike-ICSI does (33.3%, 28.6% and 23.5%, respectively) although there is no statistic significance between two groups. In addition, the blastocysts were only obtained from the Piezo-ICSI group (10.3%). Our finding shows that the Piezo-ICSI may be used as an artificial fertilization method in cattle when in vitro fertilization is not applicable.

• 대한안전경영과학회지
• /
• 제12권2호
• /
• pp.55-64
• /
• 2010

This study tried to focus on nontraditional job that has not been studied in terms of the subjects associated with MSDs(Musculoskeletal Disorders). Specifically, dental procedure was the job to be analyzed in this study. An alternative method as well as a traditional method for viewing teeth while performing simulated dental procedures. Four graduated students did both methods(direct view and indirect view) as the subjects in this study. The method based on indirect view used a video camera and monitor to view the teeth. The experiment was conducted five times for each subject. The major findings in this study were as follows; 1) Job speed was increased with the repetitions for both methods, 2) Difference of Neck flexion between direct and indirect methods was statistically siginificant(Neck flexion for indirect method was dramatically decreased), 3) Difference of job speed between direct and indirect methods was statistically significant(Job speed for direct method was faster than that of indirect method), 4) Difference of error rate between direct and indirect methods was statistically significant(error rate for direct method was lower than that of indirect method), 5) Even though indirect method did not provide better performance in terms of job speed and error rate yet, it seemed to need a trade-off between two methods in the future since indirect method provided better working postures than that of direct method.

• 대한치과의사협회지
• /
• 제57권3호
• /
• pp.149-160
• /
• 2019

Atrophic alveolar ridge of maxillary anterior area is commonly observed after the extraction of teeth in patients with severely compromised periodontal disease, causing difficulties with implant placement. Successful esthetics and functional implant rehabilitation rely on sufficient bone volume, adequate bone contours, and ideal implant positioning and angulation. The present case report categorized the ridge augmentation techniques using guided bone regeneration (GBR) on the maxillary anterior site by Seibert classification. Case I patient presented for implant placement in the position of tooth #11. The alveolar ridge was considered a Seibert classification I ridge defect. Simultaneous implant placement and GBR were performed. Eight months after implantation, clinical and radiological examinations were performed. Case III patient presented with discomfort due to mobility of the upper maxillary anterior site. Due to severe destruction of alveolar bone, teeth #11 and #12 were extracted. After three months, the alveolar ridge was considered a Seibert classification III ridge defect. A GBR procedure was performed; implantation was performed 6 months later. Approximately 1-year after implantation, clinical and radiological examinations were performed. During the whole treatment period, healing was uneventful without membrane exposure, severe swelling, or infection in all cases. Radiographic and clinical examinations revealed that atrophic hard tissues and buccal bone contour were restored to the acceptable levels for implant placement and esthetic restoration. In conclusion, severely resorbed alveolar ridge of the maxillary anterior area can be reconstructed with ridge augmentation using the GBR procedure so that dental implants could be successfully placed.

• Journal of Gastric Cancer
• /
• 제23권4호
• /
• pp.512-522
• /
• 2023

Purpose: Dental floss clip (DFC) traction-assisted endoscopic submucosal dissection (ESD) is widely performed owing to its simplicity. This study aimed to clarify the appropriate indications for the DFC traction method in early gastric cancer when ESD is performed by less-experienced endoscopists. Methods and Methods: We retrospectively analyzed 1,014 consecutive patients who had undergone gastric ESD performed by less-experienced endoscopists between January 2015 and December 2020. Gastric ESD was performed without DFC in all cases before December 2017 [DFC (-) group, 376 cases], and ESD was performed with DFC in all cases after January 2018 [DFC (+) group, 436 cases]. The procedure time and rates of en bloc resection, complete resection, and adverse events of the groups were compared. Results: The procedure time did not differ significantly between the 2 groups. However, when comparing lesions >20 mm, the procedure time in the DFC (+) group was significantly shorter than that in the DFC (-) group (95±46 vs. 75±31, P<0.01). The procedure time for lesions located in the greater curvature of the upper or middle stomach and lesions >20 mm located in the lesser curvature side of the stomach in the DFC (+) group was significantly shorter than that in the DFC (-) group. Conclusions: The indications for DFC during gastric ESD by less-experienced endoscopists include lesions located in the greater curvature of the upper or middle stomach, and lesions >20 mm located in the lesser curvature of the stomach.

• 대한장애인치과학회지
• /
• 제15권1호
• /
• pp.45-49
• /
• 2019

Bartter 증후군은 심각한 헨레고리 비후 상행각(TAL)에서의 일차적인 염류(NaCl) 수송 장애로 인하여 심각한 저칼륨혈증을 특징으로 하는 질환이다. 만성 구토로 인한 치아의 부식, 교모, 마모의 구강 내 소견을 보여 구토와 관련된 적절한 칫솔질 및 식이 습관 등에 대한 정기적인 교육과 관찰이 권장되며 교합고경의 회복을 위해 전장관 수복이 추천된다. 치과 치료 시의 스트레스로 인하여 전해질 수치의 불균형이 초래될 가능성이 있어 전신마취 하 치료가 유리할 수 있으며, 전신마취 시 과환기되어 저칼륨혈증이 심화되지 않도록 지속적인 감시를 해야하고 술 후에도 전해질 불균형이 초래되지 않도록 지속적인 감시가 필요하다.

• 한국치위생학회지
• /
• 제11권2호
• /
• pp.159-167
• /
• 2011

Objectives : The purpose of this study was to examine the satisfaction level of dental hygienists with supplementary education. The subjects in this study were 305 dental hygienists, on whom a survey was conducted from September 26 to December 10, 2009. Methods : The instrument used in this study was questionnaires that consisted of three sections: educational environments, the content and method of education, and educational administration. Results : The findings of the study were as follows: 1. In terms of satisfaction level with supplementary education, they gave a mean of 3.13, which was on the average. The dental hygienists who worked in public dental clinics, who had a 10 years or more of career and who worked in the provinces expressed more satisfaction. 2. In terms of satisfaction level with educational environments, they gave a mean of 3.22. They were most gratified with lecturers(3.34), and they expressed the least satisfaction with educational opportunities(3.14). 3. In terms of satisfaction level with the content and method of education, they gave a mean of 3.15. They were most contented with the professionalism of education, and they expressed the least satisfaction with the ratio of theory and practice(2.92). 4. In terms of satisfaction level with educational administration, they gave a mean of 3.02. They were most satisfied with the application procedure(3.22), and they expressed the least satisfaction with educational cost and publicity(2.91). Conclusions : Educational institutions that provide supplementary education should reinforce small-group supplementary education for each district, provide systematic practice-centered educational programs and offer streamlined administration service to boost the satisfaction level of dental hygienists.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제34권5호
• /
• pp.555-561
• /
• 2008

Purpose: The goal of this study was to develop a technique for creating a computerized composite maxillofacial-dental model, based on point-based surface best fit algorithm and to test its accuracy. The computerized composite maxillofacial-dental model was made by the three dimensional combination of a 3-dimensional (3D) computed tomography (CT) bone model with digital dental model. Materials and Methods: This integration procedure mainly consists of following steps : 1) a reconstruction of a virtual skull and digital dental model from CT and laser scanned dental model ; 2) an incorporation of dental model into virtual maxillofacial-dental model by point-based surface best fit algorithm; 3) an assessment of the accuracy of incorporation. To test this system, CTs and dental models from 3 volunteers with cranio-maxillofacial deformities were obtained. And the registration accuracy was determined by the root mean squared distance between the corresponding reference points in a set of 2 images. Results and Conclusions: Fusion error for the maxillofacial 3D CT model with the digital dental model ranged between 0.1 and 0.3 mm with mean of 0.2 mm. The range of errors were similar to those reported elsewhere with the fiducial markers. So this study confirmed the feasibility and accuracy of combining digital dental model and 3D CT maxillofacial model. And this technique seemed to be easier for us that its clinical applicability can good in the field of digital cranio-maxillofacial surgery.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제18권5호
• /
• pp.295-300
• /
• 2018

Background: Removal of the plate following Le Fort I osteotomy and BSSO (bilateral sagittal split osteotomy) is a common procedure. However, patients who undergo plate removal experience intense pain and discomfort. This study investigated the half-maximal effective concentration ($Ce_{50}$) of remifentanil in the prevention of plate removal pain under sedation using dexmedetomidine. Methods: The study evaluated 18 patients, between 18 and 35 years of age, scheduled for elective surgery. Remifentanil infusion was initiated after sedation using dexmedetomidine, and started at a dose of 1.5 ng/mL on the first patient via target-controlled infusion (TCI). Patients received a loading dose of $1.0{\mu}g/kg$ dexmedetomidine over 10 min, followed by a maintenance dose of $0.7{\mu}g/kg/h$. When the surgeon removed the plate, the patient Modified Observer's Assessment of Alertness/Sedation (MOAA/S) score was observed. Results: The Ce of remifentanil ranged from 0.9 to 2.1 ng/mL for the patients evaluated. The estimated effect-site concentrations of remifentanil associated with a 50% and 95% probability of reaching MOAA/S score of 3 were 1.28 and 2.51 ng/mL, respectively. Conclusion: Plate removal of maxilla can be successfully performed without any pain or adverse effects by using the optimal remifentanil effect-site concentration ($Ce_{50}$, 1.28 ng/mL; $Ce_{95}$, 2.51 ng/mL) combined with sedation using dexmedetomidine.