• Journal of Technologic Dentistry
• /
• v.39 no.2
• /
• pp.119-128
• /
• 2017

Purpose: In order to increase competitiveness for the growth and development of the dental laboratory industry, we plan to develop the dental laboratory industry. Methods: A total of 547 questionnaires were used as the final analysis data for the dental technicians from all over country participated in the 51st Korea Dental Technology Expo & Scientific Conference of the Korean Dental Technologist Association held in KINTEX from July 18 to 19, 2015. The questionnaire items consisted of 28 items in terms of general characteristics, questions about the methods to be pursued for the development of the dental laboratory industry, and recognition about the methods to be pursued to develop the dental laboratory industry. The collected data were analyzed by SPSS Ver. 21.0 for windows. Results: To improve the dental laboratory industry, actualization of dental laboratory products fee(41.2%) had the highest, followed by improving treatment of dental technician, standardization of dental laboratory products, direct bill of medical insurance, regulation of contract management on huge capital, and etc. The recognition of the measures to be pursued for the development of the dental laboratory industry was that dental laboratory products fee required to receive more than 20% of the dental prosthesis fee highest($4.62{\pm}0.76$). And to enlarge dental laboratories through M&A between dental laboratories is the lowest($3.39{\pm}1.26$). Conclusion: As a means to pursue the development of the dental laboratory industry, the actualization of dental laboratory products fee was proposed. Recognition also showed that dental laboratory products fee required to receive more than 20% of dental prosthesis fee was the highest. It is important to propose a reasonable dental laboratory products fee because it recognizes that it is necessary to promote economic growth in both development plan and awareness.

• Journal of Technologic Dentistry
• /
• v.45 no.1
• /
• pp.8-13
• /
• 2023

Purpose: This study aims to induce interest in the future society that could change with the advance of the 4th Industrial Revolution. It also intends to identify the direction of university education by investigating the perception of university students majoring in dental laboratory technology about the latest technology used in this era. Methods: The study recruited 240 college students majoring in dental laboratory technology at K and D universities in Gangwon-do and Daejeon, respectively. Online and face-to-face surveys were conducted from March 20, 2022 to April 10, 2022. Results: Although their interest in the use of emerging technologies during the 4th Industrial Revolution was above average 3.85, the dental laboratory technology students exhibited relatively high levels of anxiety 3.19 and reluctance 2.96. Second, their interest in emerging technologies demonstrated positive correlations with major satisfaction and understanding of concepts and readiness, whereas reluctance and anxiety pointed to negative correlations with understanding of the concepts of the 4th Industrial Revolution. Conclusion: Formulating guidelines is necessary to help students increase their understanding of the 4th Industrial Revolution and prepare them appropriately by setting an educational direction that can flexibly respond to the rapidly changing industrial environment.

• Journal of Technologic Dentistry
• /
• v.34 no.3
• /
• pp.283-290
• /
• 2012

Purpose: This study was aimed to know the perception about Certified Dental Technician system of students majoring in dental laboratory technology in Korea. Methods: A survey was conducted for four months from August through November 2011 with questionnaires. The responses from 1148 students majoring in dental laboratory technology in Korea were analyzed with SPSS 12.0 program, and frequency analysis and chi square test were implemented. Results: Total students who responded to the questionnaire were 1148 (100%). The population characteristic of this survey is that 691 (60.2%) are male. The respondents believed that the job skill could be expanded by implementing the system (85.6%). Also, they responded that they would be willing to acquire the Certified Dental Technician qualifications in the future (95.5%). Conclusion: Students majoring in dental laboratory technology in Korea believed that the execution of the system of Certified Dental Technician would expand the dental technology industry.

• Journal of Technologic Dentistry
• /
• v.41 no.4
• /
• pp.279-285
• /
• 2019

Purpose: The dental CAD / CAM system has been popular with the development of the digital dental industry. Zirconia is a typical material in dental CAD / CAM systems. Zirconia crowns are classified into single layer and double layer. This study is about the double layer crown of zirconia. The surface roughness, bond strength and fracture patterns of the zirconia surface were observed. Methods: Zirconia blocks were cut using a low speed cutter. Sintered to form a plate shape (6mm × 6mm × 3mm). The prepared specimens were surface treated in four ways. Surface roughness and bond strength were measured. And the fracture pattern was observed. Results: Result of surface treatment of zirconia. The surface roughness test results were as ET 2.87 ㎛, ST 2.67 ㎛, LT 2.44 ㎛, AT 2.41 ㎛, CN 2.08 ㎛ order. Bond Strength results were as LT 25.09 MPa, AT 23.27 MPa, ST 21.27 MPa, ET 21.09 MPa, CN 16.12 MPa order. Fracture patterns showed cohesive failure of 25-50% of the bond area. Conclusion: Surface roughness, bond strength and fracture pattern of the zirconia surface were observed. Etching the surface treatment of zirconia materials has been shown to affect the surface roughness. Zirconia special binder treatment has been shown to affect the bond strength improvement.

• Journal of Technologic Dentistry
• /
• v.11 no.1
• /
• pp.47-63
• /
• 1989

The study was made to clarify the degree of fatigue of dental technicians in service at the general &local hospital or the dental laboratories in the large cith of korea. The objectives of this study were 235 dental technicians who replied the questionaire which was sent by postal service out of 600 dental technicians selected by random sampling among the workers of the each dental laboratory. The instruments used in this study was the same one as developed by Industry Fatigue committee of Japan Industry Hygiene Association. This instrument was included total 30 items which is consisted of 10 perceived symptoms of fatigue in physical, mental and neuro-sensory dimension respectably. Reliability was tasted with the data of objectives, in which value of Cronbach's $\alpha$ was 9457. The following results were obtained. 1. It was revealed that the influencing demographic variables on the perceived symptoms of fatigue of dental technicians were sex, age, marital status, educational background, job carrier, working part, working hour and commuting hour. The shorted the age or job carrier, thge higher dearee of the perceived symptoms of fatigue. The longer working hours of commuting hours, the higher degree of the perceived symptoms of fatigue. The degree of the perceived symptoms of fatigue in females, unmarried person, the one with higher educational background, workers except orthodontic appliances and poorcelain contouring were higher than the other group. 2. The higher degree of the rest & leisure condition, the lower degree of the physical, mental and neuro-sensory perceived symptoms. 3. The higher degree of environmental condition of the working, the lower degree of the physical, mental and neurosensory perceived symptoms.

• Journal of Technologic Dentistry
• /
• v.43 no.4
• /
• pp.145-152
• /
• 2021

Purpose: This study aimed to produce resin prosthetics using a dental barrel finishing machine. For dental resin grinding, the ingredients of the barrel finishing media were analyzed, and surface residues of the resin were observed. Methods: Two types of barrel finishing media for dental resin grinding were tested. Specimens were made from thermal polymerized, auto polymerized, and photopolymerized resins. Finishing media were analyzed through energy-dispersive X-ray spectroscopy (EDS) component analysis and inductively coupled plasma-optical emission spectrometry (ICP-OES) component analysis. Then, the prepared specimen was barrel finished for 25 minutes using two types of barrel finishing media, and scanning electron microscope was photographed to observe the surface residues. Results: As a result of EDS component analysis, both types of finishing media were analyzed for the components of C, O, Zr and Al elements, and industry media (IM) was further analyzed for the components of Si and Mg elements. In the ICP-OES component analysis, Cd and As, which are harmful elements, were detected in IM, and no harmful elements were detected in manufacturing media (MM). Because of observation of surface residues, no residues were observed in the three types of resin specimens that were barrel finished with two types of finishing media. Conclusion: Surface residue wasn't observed on the specimens polished using two types of finishing media. However, in IM, Cd and As, which are harmful elements, were detected, making it inappropriate for clinical use. In MM, harmful elements were not detected; therefore, clinical use will be possible.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.2_2
• /
• pp.309-314
• /
• 2022

The bonding strength [ISO22674] test was conducted by firing a dedicated ceramic powder on the surface of the dental titanium material treated with micro-arc oxidation. In the test group, an average result value of 34.34 MPa was obtained, and in the control group, a result value of 21.53 MPa was obtained. The bonding strength of the test group was higher than that of the control group by 12.81 MPa, resulting in a 37% improvement in durability of the dental artificial tooth ceramic restoration.

• Journal of Technologic Dentistry
• /
• v.40 no.4
• /
• pp.231-237
• /
• 2018

Purpose: The development of the dental technology industry has digitized the dental process. Definition of Digitalization of Dental Implantation Digitalization is the process of model making and prosthodontic processing using 3D CAD and CAM. Currently, it is becoming popular due to the spread of various devices. However, precision evaluation at this stage is an important factor in precision-based dental procedures. Therefore, in this study, we want to analyze the precision of the processed body made with digital dental machine. Methods: The accuracy of digital dental pore devices was evaluated. Specimens were fabricated with 5 types of 3D printers. The external shape was measured with the prepared specimen. The surface roughness was measured. Results: As a result, precision was excellent in order of EP2 specimen, EP1 specimen, and EA2 specimen. The precision of EP3 specimen and EA1 specimen is not excellent. And the precision of the specimen processed with polymer 3D printer is excellent. The accuracy of LCPS type polymer 3D printers is considered to be excellent. Conclusion : 1. Observation of the shape The 3D printer for LCPS system and the 3D printer for SLM $40{\mu}m$ system were found to be precisely processed. 2. Surface roughness results The LCPS system polymer 3D printer has been shown to have a precise surface.

• Journal of Technologic Dentistry
• /
• v.26 no.1
• /
• pp.89-96
• /
• 2004

Hydroxyapatite powder were synthesized by precipitation method, varying pH, and reaction temperature. The powders were heated at 1,200$^{\circ}{\cdots}$ and 1,300$^{\circ}{\cdots}$ for fabrication of dental prosthesis. The results are as follows: Synthesized powder showed the smallest particle in size, under the conditions of pH 11 and reaction temperature 37$^{\circ}{\cdots}$. The hydroxyapatite was partially converted to $\alpha,\;\beta$-TCP at 1,200$^{\circ}{\cdots}$ and 1,300$^{\circ}{\cdots}$. Mechanical strength of sample was affected by such powder preparation conditions as pH and reaction temperature and sintering temperature. The mechanical strength of sample prepared under the same conditions was increased with increasing pH, reaction temperature and sintering temperature.

• Journal of Technologic Dentistry
• /
• v.44 no.2
• /
• pp.47-52
• /
• 2022

Purpose: This study aims to identify the recognition, readiness, and awareness of the need for education in the era of the 4th industrial revolution among dental technology students in the healthcare field, and to provide essential data for the development of a future-oriented curriculum. Methods: A survey of 260 students, who were briefed about the purpose of this study, was conducted at D University and G University, located in Daejeon and Gangwon-do, South Korea, respectively. A total of 229 questionnaires, excluding 31 with insufficient responses, were analyzed. Results: 1. Recognition of the 4th industrial revolution was 3.43±0.77, preparedness was 2.91±0.84, and awareness of the need for education was 3.86±0.80. 2. Major satisfaction was found to have a significant effect on concept recognition and impact recognition of the 4th industrial revolution, readiness level, and the need for education (p<0.001). Conclusion: It is necessary to develop an education program on specialized skills (professional knowledge) related to the 4th industrial revolution, and to implement such a program that serves the educational needs of individual groups.