• 대한치과기공학회지
• /
• 제21권1호
• /
• pp.165-187
• /
• 1999

We are studied the improvement syllabus of subjects in demtal technological curriculum that those are Tooth Morphology, Science of Dental Materials, Inlay Technology, Occlusal Anatomy and Dental Orthodontic Technology. Those improvement syllabus will be contributed to the achievement of national educational standards and arrangement to the technical performance of medical imaging procedure with the smallest exposure dose and the personal attributes of compassion, courtesy and concern in meeting the needs of the patients, and have a good knowledge of the dental technician professional competence.

• Restorative Dentistry and Endodontics
• /
• 제5권1호
• /
• pp.29-34
• /
• 1979

The purpose of this study was to measure thermal expansions of dental investments, Biovest(Casting Investment. Dentsply International INC, U.S.A.), Multi-Best (Use for all dental chrome-cobalt alloys, The Ransom & Randolph Co. U.S.A.), Kerr(Inlay Investment. Sybron Kerr, U.S.A.), O. K. (Inlay Investment. Shofu Dental MFG, Co. Japan), Whip-Mix (Cristobalite Inlay Investment. Whip-Mix Corporation. U.S.A.). Thermal expansion of specimens(5mm in diameter and 50mm in length) was measured by a dilatometer at the temperature range from $20^{\circ}C$ to $700^{\circ}C$ by comparing expansion between standardized quartz and experimental specimens with heating rate about $300^{\circ}C$/hr. The following results were obtained. 1. The coefficient of thermal expansion of Biovest was $15{\times}10^{-6}/^{\circ}C$ in the water powder ratio 18/100 and $14{\times}10^{-6}/^{\circ}C$ in the water powder ratio 28/100. Those of Multi-Best were $9{\times}10^{-6}/^{\circ}C$ in the water powder ratio 14/100 and $7{\times}10^{-6}/^{\circ}C$ in the water powder ratio 24/100. 2. The coefficient of thermal expansion of Kerr were $17{\times}10^{-6}/^{\circ}C$ in the water powder ratio 38/100 and $14{\times}10^{-6}/^{\circ}c$ in the water powder ratio 48/100. Those of O. K. were $9{\times}10^{-6}/^{\circ}C$ in the water powder ratio 33/100 and $7{\times}10^{-6}/^{\circ}C$ in the water powder ratio 43/100 3. The coefficient of thermal expansion of Whip-Mix were $14{\times}10^{-6}/^{\circ}C$ in the water powder ritio 40/100 and $12{\times}10^{-6}/^{\circ}c$ Fein the water powder ratio 50/100. Those of Hi-Heat were $11{\times}10^{-6}/^{\circ}c$ in the water powder ratio 28/100 and $10{\times}10^{-6}/^{\circ}c$ in the water powder ratio 38/100.

• The Journal of Advanced Prosthodontics
• /
• 제16권1호
• /
• pp.57-65
• /
• 2024

PURPOSE. The aim of this stuldy was to compare the clinical marginal fit of CAD-CAM inlays obtained from intraoral digital impression or addition silicone impression techniques. MATERIALS AND METHODS. The study included 31 inlays for prosthodontics purposes of 31 patients: 15 based on intraoral digital impressions (DI group); and 16 based on a conventional impression technique (CI group). Inlays included occlusal and a non-occlusal surface. Inlays were milled in ceramic. The inlay-teeth interface was replicated by placing each inlay in its corresponding uncemented clinical preparation and taking interface impressions with silicone material from occlusal and free surfaces. Interface analysis was made using white light confocal microscopy (WLCM) (scanning area: 694 × 510 ㎛²) from the impression samples. The gap size and the inlay overextension were measured from the microscopy topographies. For analytical purposes (i.e., 95-%-confidence intervals calculations and P-value calculations), the procedure REGRESS in SUDAAN was used to account for clustering (i.e., multiple measurements). For p-value calculation, the log transformation of the dependent variables was used to normalize the distributions. RESULTS. Marginal fit values for occlusal and free surfaces were affected by the type of impression. There were no differences between surfaces (occlusal vs. free). Gap obtained for DI group was 164 ± 84 ㎛ and that for CI group was 209 ± 104 ㎛, and there were statistical differences between them (p = .041). Mean overextension values were 60 ± 59 ㎛ for DI group and 67 ± 73 ㎛ for CI group, and there were no differences between then (p = .553). CONCLUSION. Digital impression achieved inlays with higher clinical marginal fit and performed better than the conventional silicone materials.

• 대한소아치과학회지
• /
• 제7권1호
• /
• pp.7-11
• /
• 1980

6877 children who visited to pedodontic department from 1976 to 1979, were surveyed on the state of dental caries, therapic inclination a year and yearly tendency of treatment. The results were as follows ; 1. The prevalence of dental caries tended to show the increase in general year by year. 2. Girls had higher d.e.f. T. & S. index and D.M.F. T. & S. index than boys generally. 3. Distribution of therapy a year. (1979) Amalgam Filling 4464 Pulpotomy 952 S.P.-Crown 1538 Gold Inlay 250 Space Maintainer 341 Extraction 1313 Orthodontic Appliance 206 4. Tendency of treatment in 1979 (compared with 1976) No. of new patients 87.5% increased Amalgam Filling 50.0% increased Extraction 31.4% increased Orthodontic Appliance 267.9% increased S.P.-Crown 225.8% increased Gold Inlay 27.8% decreased Space Maintainer 2.3% decreased Pulpotomy 20.5% decreased.

• 대한치과의사협회지
• /
• 제9권7호
• /
• pp.431-437
• /
• 1971

The authors performed an experimental study on the retention force in cavities with various depth and width. We used the simple model cavities which were cylindrically formed to eliminate the unexpected influence during experiment, and obtained following results. 1. The retention force in the cavities with parallel wall was vigorous even in the small cavity and increased considerably followed by extending the cavity size. 2. The ratention force resulted more vigorously by that the depth became deeper than that the distance between the lateral walls became longer. 3. Compared with the retention force in the cavities which had the same frictional lateral surface, it was more vigorous in the deeper cavity than in the cavity which was longer distance between the lateral surfaces.

• Restorative Dentistry and Endodontics
• /
• 제38권2호
• /
• pp.79-84
• /
• 2013

Objectives: This study aimed to investigate the effect of clinical clerkship-associated achievements, such as performance of procedures at the student clinic, observation, and attitude towards a clerkship, on the objective structured clinical examination (OSCE) scores of dental students graduating in restorative dentistry. Materials and Methods: The OSCEs consisted of two stations designed to assess students' clinical skills regarding cavity preparation for a class II gold inlay and a class IV composite restoration. The clerkship achievements, consisting of the number of student clinical procedures performed, observation-related OSCE, and scores of their attitudes towards a conservative dentistry clerkship, were assessed. Correlation and multiple regression analyses were conducted. Results: The correlation coefficient between the OSCE scores for cavity preparation for a class II gold restoration and clerkship attitude scores was 0.241 (p < 0.05). Regarding a class IV composite restoration, OSCE scores showed statistically significant correlations with the observation (r = 0.344, p < 0.01) and attitude (r = 0.303, p < 0.01) scores. In a multiple regression analysis, attitudes towards a clerkship (p = 0.033) was associated with the cavity preparation for a class II gold inlay OSCE scores, while the number of procedure observations (p = 0.002) was associated with the class IV composite restoration OSCE scores. Conclusions: The number of clinical procedures performed by students, which is an important requirement for graduation, showed no correlation with either of the OSCEs scores.

• Journal of Oral Medicine and Pain
• /
• 제23권2호
• /
• pp.193-209
• /
• 1998

In identifying bodies that are severely decayed or damaged, methods using fingerprints and various biochemical tests are known to have its limits. To overcome this, forensic odontological method which is based on the analysis of the cranium, tooth and dental restoration is used to enhance the accuracey of individual identification. For this reason, I have come to analysis of the dental materials that exists between the teeth that is perceived to have been previously restored and the one adjacent to it. By analyzing the constituents of gold crown-restored, non-precious metal-restored, gold inlay-restored and amalgam -restored teeth, and adjacent teeth using EDX(energy dispersive X-ray microanalysis) which was invented to analyze very small amount of elements, the nature of the restoration could be predicted and the results obtained were as follows. 1. Some of constitute of gold alloy was extracted from residual cement of gold crown restoration, but that was not extracted from the restored tooth and the one adjacent to it. 2. Some of constituents of non-precious metal alloy was extracted both in the residual cement on the tooth with no-precious metal restoration and in the tooth with the restoration itself. However, none of its constituents were found in the tooth adjacent to it. 3. Some of constituents of gold alloy were found in the residual cement of gold inlay, but they were not found in the restored tooth and the adjacent tooth. 4. Some of constituents of amalgam alloy were found both in tooth restored with amalgam and in the adjacent tooth. From the results obtained above, it is possible to utilize the data obtained from analyizing residual dental materials in a more effective way. This data compensates for the lost data due to any harm done to the restorations prior to individual identification and further enhances the accuracy. Therefore, it could be concluded that this process of analyzing residual dental materials could be beneficial to individual identification in the area of forensic odontoldogy.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.286-290
• /
• 2003

Accurate acquisition of surface geometries such as machined surfaces, biological surfaces, and deformed parts have been very important technique in scientific study and engineering, expecially for system design, manufacturing and inspection. Two camera method keeps accuracy more than double than mechanical method. In this paper, we describe the processes surface data of teeth for automatic processing, transformation that changes to coping data of possible numeric data form and processed inlay teeth. As the result of the Inlay manufacture, which can process with high resolution, therefore we construct the automatic processing system that depends on manual

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술대회 논문집 전문대학교육위원
• /
• pp.120-123
• /
• 2003

Accurate acquisition of surface geometries such as machined surfaces, biological surfaces, and deformed parts have been very important technique in scientific study and engineering, expecially for system design, manufacturing and inspection. Two camera method keeps accuracy more than double than mechanical method. In this paper, we describe the processes surface data of teeth for automatic processing, transformation that changes to coping data of possible numeric data form, and processed inlay teeth. As the result of the Inlay manufacture, which can process with high resolution, therefore we construct the automatic processing system that depends on manual.

• 대한치과기공학회지
• /
• 제2권1호
• /
• pp.17-19
• /
• 1980

This study was aimed at obtaining a desirable wax pattern for inlay. The method used was to analyze, mix, and heat several kinds of waxes, comparing the temperatures of their components. The result was Type C wax. In type C the amount of paraffin was generally contained(60$\sim$70%) was reduced to 45% and there was mixed 10%-15% of carnauba, which was intended for the wax not to soften readily at low temperatures. The type C has some advantages for general use: handy preparation, high safety, and economy. The inlay waxes commonly used contracted if the temperature fell from 38 to 28, but the contraction of type C was observed to be 0.2%$\sim$0.4% in proportion to the 10 fall. This was more characteristic in mixing.