• The Journal of the Korean dental association
• /
• v.54 no.8
• /
• pp.592-603
• /
• 2016

Pathologic tooth migration (PTM) caused by periodontal disease is a relatively common disease with a prevalance rate of 30~55%. It is one of the reasons for periodontal treatment of patients. PTM occurs when various factors related to the position of the tooth are altered and clinical features of PTM include facial flaring, diastema, proximal tilting, rotation, and extrusion of teeth. The purpose of this study was to assess the treatment of teeth of hopeless prognosis through the practice of modified intentional replantation on pathologic migrated tooth. This study presents cases using modified intentional replantation for the treatment of pathologic tooth migration caused by severe periodontitis. Modified intentional replantation is a technique that prepares extraction socket by using an implant drill. Based on 3 cases performed with modified intentional replantation, an improvement of clinical periodontal indicators such as probing pocket depth, bleeding on probing, tooth mobility, and pathologic teeth migration was observed after surgery. Also, the patients were satisfied with the functional and esthetic improvement.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.2
• /
• pp.105-108
• /
• 2003

After stage-two surgery, the highest incidence of failure has been attributed to implant overload. However, the biomechanical factors cited inthe literature that contribute to implant overload, such as bone type, cuspal inclination, horizontal offset, maxillary compared to mandibular arch, the inclusion of natural teeth within the prosthesis, and occlusal harmony are superimposed on physiologic variations. Following two cases, including reduction of cuspal inclination and usage of modified incisal pin, showed a method of contouring occlusal surface for reduction of unpreditable implant overload.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.5
• /
• pp.459-466
• /
• 2010

Alveolar distraction osteogenesis (ADO) has been regarded as an acceptable treatment for the alveolar bone deficiency. For ADO at anterior maxillary area, the vector should be oriented to forward and down-ward direction to get an adequate occlusion with mandibular teeth and to increase bone length and width for implant placement. However, the conventional commercial distraction devices for ADO are designed to allow mainly downward movement of alveolar segment, even though a forward movement can be obtained a little by controlling of inclination of device. To make ADO with controllable bidirectional vector possible, we used customized devices using self-manufactured ABDUL (Alveolar Bone Distractor Using Lag screw principle) and commercial orthodontic palatal expansion device ($Hyrex^{(R)}$). In all cases (n = 4), ADO could be performed successfully and dental implants were able to placed with adequate occlusion. We report the procedures, advantages and disadvantages of these methods.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.5
• /
• pp.389-395
• /
• 2010

Purpose: Although it is generally accepted that patients with controlled diabetes have similar rates of success for dental implants as healthy individuals, the use of dental implants in diabetic patients is controversial. In addition, the impact of diabetes on the healing of bone associated with immediately place dental implants is not completely understood. The purpose of this study was to measure bone response to implants radiologically in uncontrolled and insulin-controlled diabetic rats. Materials and Methods: Twenty rats were divided into control, insulin-treated and diabetic groups. The rats received streptozotocin (60 mg/kg) to induce diabetes; animals in the insulin-treated group also received three units of subcutaneous slow-release insulin. Two titanium implants ($1.2{\times}3$ mm) were placed in the extraction socket of the maxillary first molars of the animals and were harvested at 3 days, 1, 2 and 4 weeks. The bone density was measured by digital radiography using gray-level analysis (histogram) in the regions of interest (ROI) at four points: two mesial and two distal to both sides of the implant. Results: The results showed that the osseointegration of the implants was impaired in the diabetic rats compared to the control and the insulin-treated rats. The radiographic evidence demonstrated marked destruction of bone around the implants in the diabetic group. Both the control and the insulin-treated groups had a significantly higher bone density on radiograph than the diabetic group from the 1 week of the experiment (P<0.05 for each comparison). Conclusion: The present study revealed that the immediate placement of titanium implants in the maxilla of diabetic rat lead to delay in the maturation of bone adjacent to implants. It is expected that the reduced predictability of success of immediate implantation in patient with the uncontrolled diabetes.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.2
• /
• pp.218-224
• /
• 2017

The implant-supported fixed dental prosthesis in irradiated maxilla needs meticulous treatment planning due to low bone healing capacity. All-on-4 concept implantation can reduce the number of implants to be placed avoiding bone grafting procedure. Conventionally, prefabricated angled abutments for tilted implants have been used. However, in this case, it was replaced with computer-aided design and computer-aided manufacturing (CAD/CAM) abutment. This case report described all-on-4 concept implantation and fabrication of CAD/CAM zirconia fixed dental prostheses using CAD/CAM titanium abutments.

• Journal of Korean Dental Science
• /
• v.14 no.1
• /
• pp.1-11
• /
• 2021

Purpose: The alveolar ridge preservation (ARP) is widely conducted for implant placement. However, experimental results using deproteinized porcine bone mineral (DPBM) have been scarce. This retrospective study evaluated factors affecting the primary stability of implants in an area where ARP was performed using DPBM. Materials and Methods: Thirty-eight patients were divided into two groups based on the primary stability, with torque value of 30 Ncm as borderline. To determine the factors that affect the primary stability of implants, we collected data from patients' medical records including age, sex, reentry time, socket location, remaining bone wall at the time of extraction, and type of collagen membrane, as well as from radiographs and histomorphometric analysis. Result: The results showed statistically significant difference for the remaining extraction socket wall (P=0.014), residual graft (P=0.029), and fibrovascular tissue (P=0.02) between the two groups. There was an insignificant tendency toward the time of reentry surgery (P=0.052) and location (P=0.077). All implants placed in sites using DPBM functioned well up to 3 years. Conclusion: Within the limitations of the present study, extraction socket wall, residual graft, and fibrovascular tissue can affect the primary stability at the time of implant placement on grafted sites using DPBM and collagen membranes. In addition, reentry time and locations can be considered. In future studies, comparative experiments in quantified models will be required to supporting the findings.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.35 no.4
• /
• pp.221-226
• /
• 2013

Purpose: This study is to evaluate the efficacy of the autogenous tooth bone graft material, clinically and radiologically, as related to implant installation. Methods: In oral and maxillofacial surgery department of Ajou University Hospital, guided bone regeneration (GBR), implant placement combined with GBR, sinus graft, implant placement combined with sinus graft, and defect filling were performed in 46 patients, using autogenous tooth bone. Among these, 66 implants were inserted with autogenous tooth bone. Implant stability quotient (ISQ) was measured by Osstell Mentor (Integration Diagnostics, Goteborg, Sweden) on 39 implants on the operation date and 4 months later, and on 21 implants 9months on the average at the final setting of restoration. Twenty-eight implants with GBR and sinus graft (GBR group: n=14, sinus graft group: n=14) were evaluated radiologically to measure the resorption of grafted autogenous tooth bone after loading. Results: The average initial stabilization of the installed implants was 67 ISQ, and the average secondary stabilization at 4 months later was 76. The average bone loss of GBR group as measured 8.0 months after application of prosthesis loading was 0.29 mm and the average bone loss of the sinus graft group as measured 7.6 months after application of prosthesis loading was 0.66 mm, respectively. In the histological assessment, formation of the new bone and continuous trabecular bone pattern was identified around autogenous tooth bone. Conclusion: Based on these results, we concluded that autogenous tooth bone is an excellent bone graft material that can substitute the autogenous bone.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.4
• /
• pp.326-329
• /
• 2002

Adequate alveolar bone height and width are required for the successful placement of dental implants. Conventional therapeutic regimens for alveolar atrophy are bone grafts or augmentation using allografts and membrane (GBR). Conventional graft techniques have some limitations and complications such as infection, soft tissue problem and high resorption rate. Recently, distraction osteogenesis of alveolar bone is considered as a new alternative for ridge augmentation. Distraction osteogenesis was originally defined and popularized by Ilizarov for lengthening of long bone. Some clinicians have tried to apply distraction osteogenesis in treatment of maxillofacial discrepancies. It was also used to augment alveolar bone. Cologne study group successfully applied the technique for augmentation of alveolar bone and designed several miniplate-distractor systems fabricated by Martin Medizintechnik GmbH in Germany. Vertical distraction of alveolar bone was successfully completed in 104 patients with miniplate-distractor systems. The mean distance of distraction was 10.2mm (range: 6-15 mm) and the mean length of segment was 45 mm (range: 6-127 mm). 162 dental implants in 54 patients were placed immediately or 4 weeks later after removal of the distractor. The results of our study show that vertical distraction of alveolar bone is an effective and reliable technique to restore alveolar atrophy and alveolar vertical defect caused by trauma or tumor.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.38 no.4
• /
• pp.204-211
• /
• 2012

Objectives: Dental implants installation in patients with diabetes remains controversial as altered bone healing around implants has been reported. And little is known about the biological factors involved in bone healing around implants. The present study aimed to investigate the biological markers around immediately placed implants in rats with controlled and uncontrolled diabetes. Materials and Methods: Twenty rats (40 sites) were divided into the control, insulin-treated and diabetic groups. The rats received streptozotocin (60 mg/kg) to induce diabetes; animals in the insulin-treated group also received three units of subcutaneous slow-release insulin. Two threaded titanium alloy implant ($1.2{\times}3mm$) were placed in the extraction socket of the both maxillary first molars and allowed for healing. Bone blocks including implant were harvested at 3 days, 1, 2 and 4 weeks. The levels of bone morphogenetic protein (BMP)-4, transforming growth factor (TGF)-${\beta}1$, osteocalcin (OC) and osteonectin (ON) were measured in the peri-implant osseous samples by RT-PCR. Results: The BMP-4 level increased immediately in all groups by day 3, then decreased abruptly in the control and the insulin-treated groups. However, by week 4, all groups showed mostly the same amount of BMP-4 expression. The level of TGF-${\beta}1$ also instantly increased by day 3 in the insulin-treated group. This level elevated again reaching the same values as the control group by week 4, but was not as high as the diabetic group. In addition, the expression of OC and ON in the control and insulin-treated groups was higher than that of the diabetic group at 2 weeks and 4 weeks, indicating active bone formation in these groups. Conclusion: The immediate placement of titanium implants in the maxilla of diabetic rat led to an unwanted bone healing response. Conclusively, the results of this study suggest that immediate implant insertion in patients with poorly controlled diabetes might be contraindicated.

• Journal of Periodontal and Implant Science
• /
• v.44 no.1
• /
• pp.33-38
• /
• 2014

Purpose: Autogenous bones are frequently used because of their lack of antigenicity, but good osteoconductive and osteoinductive properties. This study evaluated the biological behavior of perforated and nonperforated cortical block bone grafts. Methods: Ten nonsmoking patients who required treatment due to severe resorption of the alveolar process and subsequent implant installation were included in the study. The inclusion criteria was loss of one or more teeth; the presence of atrophy of the alveolar process with the indication of reconstruction procedures to allow rehabilitation with dental implants; and the absence of systemic disease, local infection, or inflammation. The patients were randomly divided into two groups based on whether they received a perforated (inner surface) or nonperforated graft. After a 6-month healing period, a biopsy was performed and osseointegrated implants were installed in the same procedure. Results: Fibrous connective tissue was evident at the interface in patients who received nonperforated grafts. However, full union between the graft and host bed was visible in those who had received a perforated graft. Conclusions: We found that cortical inner side perforations at donor sites increased the surface area and opened the medullary cavity. Our results indicate an increased rate of graft incorporation in patients who received such perforated grafts.