• 대한소아치과학회지
• /
• 제49권1호
• /
• pp.14-24
• /
• 2022

이 연구의 목적은 디지털 치열 모형에서 치아 폭경, 볼튼 비율, 수평 피개, 수직 피개를 포함한 교정적 측정의 타당성을 확인하는 것이다. 만 12 - 18세의 환자를 대상으로 세가지 형태의 치열 모형을 획득하였다. 기존의 석고 모형을 형성하였고, DOF freedom HD 모형 스캐너를 통해 디지털 모형으로 변환하였다. 그리고 CS3600 구강 스캐너로 디지털 모형을 형성하였다. 각 모형에서 측정 시행 후, 급내 상관 계수를 통해 계측의 신뢰성과 재현성을 확인하였으며, 대응 표본 t 검정을 사용하여 타당성을 평가하였다. 결과적으로 모든 군에서 급내 상관계수는 0.750을 초과하여 연구자 내 신뢰성과 연구자 간 재현성이 있음을 확인하였다. 모형 스캔한 군은 전체 및 전치 볼튼 비율, 수평 및 수직 피개에서 타당성을 보였다. 구강 스캔한 군은 전치 볼튼 비율, 수평 피개에서 타당성을 보였다. 구강 스캔한 디지털 모형을 이용한 계측은 인상 채득에 어려움이 있는 소아 청소년에게 고려할 수 있는 대안이다. 하지만 임상에서 이를 교정적 분석에 이용할 경우 오차를 고려한 적용이 필요하다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제36권2호
• /
• pp.78-86
• /
• 2010

Introduction: Cone beam computed tomography (CBCT) has various advantages and is used favorably in many fields in dentistry. Especially, CBCT is being used as basic diagnostic tool for 3-dimensional analysis in orthognathic patient. Two-dimensional cephalograms can be synthesized from CBCT digital imaging and communications in medicine (DICOM) data. In this study, conventional cephalograms and CBCT were taken simultaneously, and representative landmarks were located and analyzed in its accuracy and reproducibility. Materials and Methods: Ten patients who had orthognathic surgery in Wonkwang University Daejeon Dental Hospital participated in this study. For each patient, CBCT and conventional cephalogram was taken. By using Ondemand (Cybermad, Korea), 2-dimensional cephalograms was established on CBCT. In addition, 19 landmarks were designated and measured by 3 orthodontists twice a week. After these landmarks were transferred to a coordinate, distance of landmark and axis, standard error, distribution degree were measured, compared and analyzed. Results: Comparing the CT ceph group and conventional cephalogram group, CT ceph group had shown shorter distance of landmark and axis in S, Hinge axis, Bpt, Ba, Or, Corpus left. Standard error of the mean shows that CT ceph group has better reproducibility in Or, Corpus left, Hinge axis at X axis and Na, U1R, U1T, Bpt, PNS, Ba Corpus left, Hinge axis at Y axis. In both groups, mean error was less than 1.00 mm, no significant difference were found between CT ceph group and conventional cephalogram group in all measurements. Furthermore, comparing two groups, each 17 landmarks out of 19 had its characteristic in distribution degree. Conclusion: No significant difference were found between CBCT composed cephalographic radiograph and conventional cephalograghic radiograph, clinical application may be possible if improved.

• 구강회복응용과학지
• /
• 제28권1호
• /
• pp.27-36
• /
• 2012

임플란트를 이용한 치료가 대중화됨에 따라 다양한 문제가 보고되고 있는데, 이 중에서도 나사풀림현상과 관련된 토크 조절기의 사용에 있어 제조회사에서 권장하는 적절한 토크값과 실제 적용되는 조임력에는 차이가 있음이 여러 연구결과를 통해 보고되고 있다. 본 연구에서는 제품마다 사용기간이 다른 토크 조절기를 이용하여 각각에 따른 정확도를 비교, 분석하고자 하였다. 오차율은 제조회사별로 차이가 있었지만 모든 제품에서 사용기간이 증가할수록 기준값에 대한 오차율은 증가하였다. 그리고 반복 조임 횟수 증가에 따른 측정값의 변화를 살펴보면 반복 조임 초기에는 기준값에 근접한 값을 나타내었지만 기준값에 대한 변화의 폭은 크게 나타났고, 반복 조임 횟수가 증가할수록 기준값에 대한 오차율은 증가하였지만 변화의 폭은 줄어드는 것으로 관찰되었다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제29권6호
• /
• pp.520-526
• /
• 2007

The accuracy of model surgery is one of important factors which can influence the outcome of orthognathic surgery. To evaluate the accuracy of digitalized model surgery, we tried the model surgery on a software after transferring the mounted model block into a digital model, and compared the results with that of classical manual model surgery. We could get the following results, which can be used as good baseline analysis for the clinical application. 1. We made the 3D scanning of dental model blocks, and mounted on a software. And we performed the model surgery according to the previously arranged surgical plans, and let the rapid prototyping machine produce the surgical wafer. All through these process, we could confirm that the digital model surgery is feasible without difficulties. 2. The digital model surgery group (Group 2) showed a mean error of $0.0{\sim}0.1mm$ for moving the maxillary model block to the target position. And Group 1, which was done by manual model surgery, presented a mean error of $0.1{\sim}1.2mm$, which is definitely greater than those of Group 2. 3. Remounted maxillary model block with the wafers produced by digital model surgery from Group 2 showed the less mean error (0.2 to 0.4 mm) than that produced by manual model surgery in Group 1 (0.3 to 1.4 mm). From these results, we could confirm that the digital model surgery in Group 2 presented less error than manual model surgery of Group 1. And the model surgery by digital manipulation is expected to have less influence from the individual variation or degree of expertness. So the increased accuracy and enhanced manipulability will serve the digital model surgery as the good candidate for the improvement and replacement of the classical model surgery, if careful preparation works for the clinical adjustment is accompanied.

• 전기학회논문지P
• /
• 제51권2호
• /
• pp.87-93
• /
• 2002

Accurate acquisition of surface geometries such as machined surfaces, biological surfaces, and deformed parts have been very important technique in scientific study and engineering, especially for system design, manufacturing and inspection. Two-camera method keeps accuracy more than double than mechanical method. In this paper, a new method is studied to acquire 3D geometric data of the small object such as a die in stone model. When the devices, cameras, laser beam and object are in a perfect plane, the calculation is measured by position error 0.025[mm] within. But this paper shows that arbitrarily positioned system can also be used to obtain 3D data. Also, this paper present a method to generate coping surface data with which CAM system can do for milling work.

• 대한전자공학회논문지
• /
• 제7권2호
• /
• pp.43-48
• /
• 1970

마이크로파주파수 대역에서 비자성체의 정밀한 유전상수를 구하는 방법을 서술하였다. 재래식 방법인 공동공진법이나 임피이던스 측정에 의한 방법보다 정밀한 결과를 얻을 수 있었고 간단한 계산식에 대입하여 비교적 적은 오차범위에서 쉽게 결과를 얻을 수 있음을 증명하였다.

• 치과방사선
• /
• 제28권2호
• /
• pp.435-459
• /
• 1998

In order to achieve a successful endodontic treatment, root canals must be obturated three-dimensionally without causing any damage to apical tissues. Accurate length determination of the root canal is critical in this case. For this reason, I've used the conventional periapical radiography, Digora/sup (R)/(digital imaging system) and Root ZX/sup (R)/(the frequency dependent type apex locator) to measure the length of the canal and compare it with the true length obtained by cutting the tooth in half and measuring the length between the occlusal surface and the apical foramen. From the information obtained by these measurements, I was able to evaluate the accuracy and clinical usefulness of each systems. whether the thickness of files used in endodontic therapy has any effect on the measuring systems was also evaluated in an effort to simplify the treatment planning phase of endodontic treatment. 29 canals of 29 sound premolars were measured with #15, #20, #25 files by 3 different dentists each using the periapical radiography. Digora/sup (R)/ and Root ZX/sup (R)/. The measurements were then compared with the true length. The results were as follows: 1. In comparing mean discrepancies between measurements obtained by using periapical radiography(mean error: -0.449±0.444 mm), Digora/sup (R)/(mean error: -0.417±0.415 mm) and Root ZX/sup (R)/(mean error: 0.123±0.458 mm) with true length. periapical radiography and Digora/sup (R)/ system had statistically significant differences(p<0.05) in most cases while Root ZX/sup (R)/ showed none(p>0.05). 2. By subtracting values obtained by using periapical radiography, Digora/sup (R)/ and Root ZX/sup (R)/ from the true length and making a distribution table of their absolute values. the following analysis was possible. In the case of periapical film. 140 out of 261<53.6％) were clinically acceptable satisfying the margin of error of less than 0.5 mm. 151 out of 261 (53,6％) were acceptable in the Digora/sup (R)/ system while Root ZX/sup (R)/ had 197 out of 261(75.5％) within the limits of 0.5mm margin of error. 3. In determining whether the thickness of files has any effect on measuring methoths, no statistically significant differences were found(p>0.05). 4. In comparing data obtained from these methods in order to evaluate the difference among measuring methods, there was no statistically significant difference between periapical radiography and Digora/sup (R)/ system(p>0.05), but there was statistically significant difference between Root ZX/sup (R)/ and periapical radiography(p<0.05). Also there was statistically significant difference between Root ZX/sup (R)/ and Digora/sup (R)/ system(p<0.05). In conclusion, Root ZX/sup (R)/ was more accurate when compared with the Digora/sup (R)/ system and periapical radiography and seems to be more effective clinically in determining root canal length. But Root ZX/sup (R)/ has its limits in determining root morphology and number of roots and its accuracy becomes questionable when apical foramen is open due to unknown reasons. Therefore the combined use of Root ZX/sup (R)/ and the periapical radiography are mandatory. Digora/sup (R)/ system seems to be more effective when periapical radiographs are needed in a short period of time because of its short processing time and less exposure.

• 구강회복응용과학지
• /
• 제32권1호
• /
• pp.60-69
• /
• 2016

목적: 본 연구에서는 실제 환자의 석고모형의 콘빔CT (Cone Beam Computed Tomography)이미지로 디지털 모델을 제작하고 이 디지털 모델을 동일한 석고모형을 3차원 광학 스캐너로 스캔 하여 얻은 디지털 모델과 비교하였다. 연구 재료 및 방법: 총 11쌍의 석고모형에 대하여 실험을 진행 하였다. 콘빔CT를 이용하여 CT 영상을 촬영하여 디지털 모델을 제작 하였고 3차원 광학 스캐너를 사용해 대조군이 되는 디지털 모델을 제작하였다. 이를 이용해 각 석고모형에 대하여 콘빔CT와 3차원 광학 스캐너를 이용하여 만든 디지털 모델을 한 쌍으로 묶어 상, 하악 11개의 비교 쌍을 구성하고 각 쌍에 대하여 차이점을 분석하였다. 결과: 대조군과 비교 시 콘빔CT 영상으로부터 구성된 디지털 모델이 대조군 보다 과다 추정된 부분인 양의 오차의 평균은 0.059 - 0.117 mm, 과소 추정된 부분인 음의 오차의 평균은 0.066 - 0.146 mm의 범위 내에 존재했다. 또한 유의수준 0.05에서 양의 오차의 평균은 $70-100{\mu}m$, 음의 오차의 평균은 $100-120{\mu}m$ 내에 존재 함을 확인하였다. 결론: 석고모형의 콘빔CT 영상으로부터 구성된 디지털 모델은 최종 수복물 제작에는 부적합하나 임시수복물 제작 및 교정 진단 과정에 활용될 수 있는 가능성이 있다.

• 대한치과교정학회지
• /
• 제35권5호
• /
• pp.331-340
• /
• 2005

치관경사도 연구는 부정교합 진단과 치료 계획 수립 및 더욱 편리한 교정 장치 개발과 관련한 기초 자료로써 중요시되어 왔다 이에 본 연구는 307명(남자 187명, 여자 120명)의 대표본 성인 정상교합자를 연구대상으로 삼아 자료의 신뢰성 검증이 병행된 치관경사도를 보고함으로써 치과교정학 임상에 도움이 되는 기초자료를 도출해 보고자 시행되었다. 치관경사도 측정을 위하여 정상교합자 표본의 모형 상에서 개개 치아의 근원심 각도 및 협설측 각도를 측정하였으며, 측정 전후 측정자간 및 측정자 내의 신뢰성 검증을 시행하였고. 남녀간의 성차와 기존 연구자료와의 차이를 검증하였다. 연구 결과 본 연구가 대표본을 대상으로 하여 높은 신뢰성 지표를 보였음에도 불구하고 정상교합자의 치관경사도는 변동이 심한 것이 관찰되었고 이에 따라 기존 연구들에 대비하여 임상적으로 유의한 자료상의 차별성은 고찰할 수 없었으며 변동의 양상 또한 선학들이 보고한 자료와 유사하였다 결론적으로 치관경사도 측정시 드러난 정상변동을 해석하여 개별 적합성이 최대로 증진된 효율적인 치과교정장치를 개발하기 위해 좀 더 발전된 수학적·통계학적 모형 구성이 필요할 것으로 생각되었다

• Imaging Science in Dentistry
• /
• 제37권3호
• /
• pp.165-170
• /
• 2007

Purpose: To estimate the shape of root and pulp canal using a dental cone beam computed tomography (CBCT) and to evaluate the accuracy of imaging reformation. Materials and Methods: CBCT images were obtained with incisors, premolars, and molars as the destination by using PSR $9000N^{TM}$ Dental CT system (Asahi Roentgen Ind. Co., Ltd, Kyoto, Japan) and i-CAT (Imaging Sciences International, Inc, USA) cone beam CT unit that have different kind of detector and field of view, and compared these with the shape and the size of actual root and root canal. Results: When the measuring value of cone beam computed tomography concerning to each root's bucco-lingual diameter and mesio-distal diameter was compared with the value of the actual root, it reveals an error range $-0.49{\sim}+0.63$ mm at PSR900N and $-0.97{\sim}+1.14$ mm at i-CAT (P>0.05). It was possible to identify and measure PSR$9000N^{TM}$ Dental CT system to the limit $0.48{\pm}0.06mm$ (P>0.05) and i-CAT CBCT to the limit $0.86{\pm}0.09mm$ (P<0.05) on estimating the size and the shape of root canal. Two kinds of CBCT images revealed the useful reproducibility to estimate the shape of root, but there was the difference to estimate the shape of root according to apparatus. The reproducibility of root shape in the image of three-dimensions at PSR 900N is low such as 0.65 mm in a case of minute root canal. Conclusions: CBCT images revealed higher accuracy of the imaging reformation for root and pulp and clinically CBCT is a useful diagnostic tool for the assessment of root and canal. However, there are different qualities of imaging reformation according to CBCT apparatus and limitation of reproducibility for minute root canals.