• Journal of Korean society of Dental Hygiene
• /
• v.16 no.1
• /
• pp.77-83
• /
• 2016

Objectives: This study was carried out to investigate the effect of fluoride application after dental prophylaxis by the type of dental floss. Methods: Artificial caries lesion was made on the surface of cow's permanent teeth having sound enamel surface and vickers hardness number(VHN) was measured. Specimens were classified into APF gel group and artificial saliva group. Each group was divided into waxed floss group and unwaxed flossed group. All specimens were immersed into the artificial saliva for one minute and dental flossing was applied to waxed or unwaxed floss. After washing and drying, APF gel groups were applied with fluoride for four minutes and artificial saliva groups were immersed into the artificial saliva for four minutes. After treatment, specimens were measured by VHN and surface conditions of enamel were confirmed by scanning electron microscopy(SEM). Results: VHN of waxed flossing and fluoride application group increased to $6.78{\pm}2.75$. VHN of unwaxed flossing and fluoride application group increased to $7.36{\pm}2.51$. There was no significant difference between waxed and unwaxed groups(p>0.05). VHN of waxed flossing and artificial saliva group increased to $1.07{\pm}2.84$. VHN of waxed flossing and artificial saliva group increased to $1.05{\pm}3.13$. There was no significant difference between waxed and unwaxed groups(p>0.05). There was significant increase in VHN between waxed/unwaxed flossing and fluoride application. However, waxed/unwaxed flossing with artificial saliva showed no significant VHN increase. SEM demonstrated no residue on the enamel surface in the waxed flossing groups. Conclusions: No difference was found in the remineralization of enamel by waxed flossing or unwaxed flossing.

• The Journal of the Korean dental association
• /
• v.16 no.12 s.115
• /
• pp.935-940
• /
• 1978

The purpose of this study was to evaluate the marginal sealing ability of 'Hi-Pol' Enamel Bond system. Using freshly extracted human teeth and 2% acquous methylene blue, the marginal leakage of dye in restorative materials such as 'Hi-Pol' Enamel Bond system, Hi-Pol, Adaptic, Nuva system, Epolite and Amalgam were investigated at 37℃ and under temperature cycling in range of 4℃-60℃. the results as follows; 1. All filling materials showed some degree of marginal penetration by 2% methylene blue dye. 2. 'Hi-Pol' Enamel Bond system revealed the least marginal penetration by 2% methylene blue as Nuva did at 37℃, but under temperature cycling in range of 4℃-60℃ it showed the greatest marginal penetration. 3. Hi-Pol restoration showed a tendency the similar to the other composite restoration. 4. Nuva system had the most effective marginal sealing ability either at 37℃ and under temperature cycling.

• Restorative Dentistry and Endodontics
• /
• v.43 no.2
• /
• pp.22.1-22.9
• /
• 2018

Objectives: To evaluate and compare light-transmittance in dental tissues and dental composite restorations using the incremental double-layer technique with varying layer thickness. Materials and Methods: B1-colored natural teeth slabs were compared to dental restoration build-ups with A2D and B1E-colored nanofilled, supra-nanofilled, microfilled, and microhybrid composites. The enamel layer varied from 0.3, 0.5, or 1.2 mm thick, and the dentin layer was varied to provide a standardized 3.7 mm overall sample thickness (n = 10). All increments were light-cured to $16J/cm^2$ with a multi-wave LED (Valo, Ultradent). Using a spectrophotometer, the samples were irradiated by an RGB laser beam. A voltmeter recorded the light output signal to calculate the light-transmittance through the specimens. The data were analyzed using 1-way analysis of variance followed by the post hoc Tukey's test (p = 0.05). Results: Mean light-transmittance observed at thicker final layers of enamel were significantly lower than those observed at thinner final layers. Within 1.2 mm final enamel resin layer (FERL) thickness, all composites were similar to the dental tissues, with exception of the nanofilled composite. However, within 0.5 mm FERL thickness, only the suprananofilled composite showed no difference from the dental tissues. Within 0.3 mm FERL thickness, none of the composites were similar to the dental tissues. Conclusions: The supra-nanofilled composite had the most similar light-transmittance pattern when compared to the natural teeth. However, for other composites, thicker FERL have a greater chance to match the light-transmittance of natural dental tissues.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.2
• /
• pp.335-343
• /
• 2012

Objectives : The aim of this investigation was to evaluate the remineralization effect of Bamboo salt and NaF+Bamboo salt solutions on bovine enamel formed incipient artificial enamel caries by microcomputed tomography (micro CT). Methods : Experimental solutions were distilled water(negative control), 2% sodium fluoride solution (2% NaF group), 3% bamboo salt solution (3% BS group) and the solution mixed 2% sodium fluoride solution and 3% bamboo salt solution (2% NaF+3% BS group). Specimens were prepared from extracted bovine teeth and divided into 4 groups of 10 specimens each by randomized blocks according to density. Then the specimens surface were divided equally into three parts to observe sound enamel area, incipient enamel carious area and remineralized enamel area. Only one-third of specimen surface was coated with nail varnish and these were exposed to a lactate carbopol buffer system for 72 hours. Then one-half of the demineralized enamel area was coated with nail varnish. The specimens were carried out under pH cycling model for 14 days as follows; samples were immersed in each experimental solution for 2 mins 3 times per day, demineralized for 4 hours and in mixed saliva for the remaining hours. After pH cycling, density was measured using micro CT. Results : All experimental groups showed remineralization effects except for negative control group(p<0.05). The differences of density after experimental solution treatment were statistically significant difference among 4 groups (p<0.01). The density difference values of groups were $0.04{\pm}0.01$ in negative control group, $0.19{\pm}0.01$ in 2% NaF group, $0.14{\pm}0.01$ in 3% BS group, and $0.21{\pm}0.01$ in 2% NaF+3% BS group. Conclusions : The bamboo salt solution showed remineralization effects on incipient artificial enamel caries and the solution mixed sodium fluoride solution and bamboo salt solution showed more remineralization effects than the bamboo salt solution. Thus, it is suggested that bamboo salt can be used as remineralization agent in incipient enamel caries lesion.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.1
• /
• pp.51-70
• /
• 1999

Dental porcelain is one of the materials of choice for restoration where esthetics is of concern, but has a considerable potentials of wear. The wear of enamel is variable when opposed by different porcelain systems and surface conditions, and the exposed dentine and opaque porcelain due to clinical failure is expected to have high potentials of wear. The purpose of this study was to investigate the wear effects of self-glazed, polished incisal porcelain. polished dentine and opaque porcelain against human enamel in the laboratory by use of a pin-on-disk type wear tester. 4 types of dental porcelain($Vita-{\Omega}$, Ceramco-II, Vintage powder $Vita-{\alpha}$ of In-Ceram system) and type IV gold alloy as cotrol group were used for test specimens. Intact buccal cusps of maxillary premolar were used for enamel specimens, and the cusp converged to a point and was devoid of visible abrasion, caries, decalcification. The upper part was the cusp of a maxillary premolar and the lower part was a porcelain specimen. The enamel wear was deter-mined by weighing the cusp before and after each test. Surface profilometer was used to quantitate wear of the porcelain specimens. Vicker's hardness tester was used to evaluate the surface hardness of test specimens. The SEM was used to evaluate the wear surfaces. The results were as follows : 1 Self-glazed porcelain produced more enamel wear than polished porcelain, especially the enamel wear of $Vita-{\alpha}$ self-glazed porcelain was 3.2 times more than that of other groups. 2. Opaque porcelain produced least porcelain wear, $Vita-{\alpha}$ self-glazed porcelain produce greatest porcelain wear, but there was no statistically significant difference between the groups(p>0.05). 3. The enamel wear of dentine porcelain was 3.8 times more than that of polished inisal porcelain(p<0.05), and the enamel wear of opaque porcelain was 1.9 times more than that of polished inisal porcelain, but there was no statistically significant difference between the groups(p>0.05) 4. Overglazed porcelain produced less enamel wear than self-glazed porcelain, and more enamel wear than polished porcelain, but there was no statistically significant difference between the groups(P>0.05). 5. The hardness number of $Vita-{\Omega}$ dentine and Ceramco-II opaque porcelain was larger, but that of Vintage dentine and $Vita-{\alpha}$ self-glazed porcelain was similar to other groups. 6. Examination of SEM photographs revealed that overglazed porcelain had smoother surface than self-glazed porcelain, and self-glazed porcelain had smoother surface than polished porcelain. Much polishing scratches and larger porosities were observed on the opaque porcelain specimen, and much polishing scratchess and small porosities were observed on the dentine porcelain specimen.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.1 no.1
• /
• pp.9-17
• /
• 1974

The purpose of this study was to clarify the relationship between dental caries status, and the content of fluoride in drinking water, and the content of fluoride in enamel of deciduous teeth of Korean children. The specific areas selected in this study were Asan-Kun and Seouchon-Kun (Chung Cheoung Nam-Do) where the fluoride content in the deep well water were 0.9 ppm and 0.4 ppm respectively. The dental caries status of 720 children aged 6 to 11 who have been lived since birth was detected. The following results were obtained upon this study: 1. The def person rate, deft rate and def index of the Asan-Kun children were revealed 46.11%, 14.41% and 1. 69 respectively. The fluoride content in the outer layer of enamel was 430 ppm. 2. The def person rate, deft rate and def index of the Seouchon-Kun children were revealed 59.17%, 20.97% and 2.40 respectively. The fluoride content in the outer layer of enamel was 391 ppm. 3. The def person rate, deft rate and def index of the Asan-Kun children were showed lower value than the Seouchon-Kun children. The fluoride content of the outer layer of enamel of the Asna-Kun children were showed higher value than the Seouchon-Kun children.

• The Journal of Advanced Prosthodontics
• /
• v.11 no.1
• /
• pp.23-31
• /
• 2019

PURPOSE. To investigate and compare the surface roughness (SR), weight and height of monolithic zirconia (MZ), ceramometal (CM), lithium disilicate glass ceramic (LD), composite resin (CR), and their antagonistic human teeth enamel. MATERIALS AND METHODS. 32 disc shaped specimens for the four test materials (n=8) and 32 premolars were prepared and randomly divided. SR, weight and height of the materials and the antagonist enamel were recorded before and after subjecting the specimens to 240,000 wear-cycles ($49N/0.8Hz/5^{\circ}C/50^{\circ}C$). SR, height, weight, and digital microscopic qualitative evaluation were measured. RESULTS. CM ($0.23+0.08{\mu}m$) and LD ($0.68+0.16{\mu}m$) exhibited the least and highest mean difference in the SR, respectively. ANOVA revealed significance (P=.001) between the materials for the SR. Paired T-Test showed significance (P<.05) for the pre- and post- SR for all the materials. For the antagonistic enamel, no significance (P=.987) was found between the groups. However, the pre- and post- SR values of all the enamel groups were significant (P<.05). Wear cycles had significant effect on enamel weight loss against all the materials (P<.05). CR and MZ showed the lowest and highest height loss of 0.14 mm and 0.46 mm, respectively. CONCLUSION. MZ and CM are more resistant to SR against the enamel than LD and CR. Enamel worn against test materials showed similar SR. Significant variations in SR values for the tested materials (MZ, LD, CM, and CR) against the enamel were found. Wear simulation significantly affected the enamel weight loss against all the materials, and enamel antagonist against MZ and CM showed more height loss.

• International Journal of Oral Biology
• /
• v.36 no.4
• /
• pp.195-201
• /
• 2011

Matrix metalloproteinases (MMPs) have been implicated in tissue development and re-modeling. Dynamic morphological changes of tooth germs reflect involvement of these enzymes during odontogenesis. The present study was performed to investigate expression and localization of MMP-2 and MMP-9, which have been known to have type IV collagenase activities, in rat tooth germs at different developmental stages. MMP-2 expression was increased gradually in the tooth germs from cap to crown staged germs at both transcription and translation levels. The localization of this molecule was detected in secretory ameloblasts and preameloblasts. The strong immunoreactivities were occasionally seen along the basement membrane between ameloblasts (or preameloblasts) and odontoblasts (preodontoblasts). However, weak reactivity was detected in odontoblasts and reduced enamel epithelium. The level of MMP-9 expression in the tooth germs was higher in cap stage than in crown staged germs at both transcription and translation levels. They were strongly expressed in both ameloblasts and odontoblasts. Even though reduced enamel epithelium after enamel formation and inner enamel epithelium at the cap stage exhibited weak reactivity, strong reactivity was detected in dental follicles and perifollicular tissues surrounding cap staged germs. These results suggested that MMP-2 may involve degradation of the basement membrane during hard tissue formation, whereas MMP-9 might be involved in remodeling of follicular tissues.

• Journal of dental hygiene science
• /
• v.10 no.6
• /
• pp.451-457
• /
• 2010

It is well known that most of the beverages on sale contain acid. Among these beverages, one of the most typically purchased products is Coca-Cola ($Coke^{(R)}$), which affects the demineralization of the tooth enamel surface. However other beverages also affect the erosion of the tooth enamel surface. Therefore, the aim of this study was to observe the influence that acid containing beverages have upon the tooth enamel surface. In this study, 30 enamel specimens were obtained from extracted maxillary third molars without cracks. The study measured the pH concentrations and the Ca and P concentration levels of the acidic beverages. The control without exposure was kept in distilled water, and each enamel specimen was stored for 30-min, 60-min, and 120-min. The erosion effect of the enamel surface was observed by SEM. The results obtained from this study can be summarized as follows: 1. The pH concentration of acidic beverages, without milk, was 3.105 on average. The beverages eroded the enamel surface and the erosion degree was determined by the pH concentration of beverages. 2. The erosion degree significantly increased by as the exposure time increased. The difference in the erosion degree between the 30-min group and the 60-min and the 120-min group was significant, but the erosion degree of the 120-min group was significantly less than that of the initial group. 3. When compared with the beverages containing similar pH concentrations, the demineralization degree of the beverages containing higher concentrations of Ca and P was lower.

• Journal of Korean society of Dental Hygiene
• /
• v.10 no.3
• /
• pp.473-481
• /
• 2010

Objectives : To evaluate the effect of fluoride application on the color and microhardness of bleached enamel and compare it to that of casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) application. Methods : Twenty freshly extracted human adult molar were each sectioned into halves, the specimens divided and treated according to five experimental groups: Group 1, treatment with 10% carbamide peroxide (CP) bleaching agent; Group 2, treatment with 10% CP followed by a 1.23% fluoride gel application; Group 3, treatment with 10% CP followed by a 2.23% sodium fluoride varnish application; Group 4, treatment with 10% CP followed by a 0.11% sodium fluoride gel application; Group 5, treatment with 10% CP followed by a CPP-ACP gel application. All groups were treated 6 h per day for 14 days then immersed in distilled water for 2 weeks. Changes in enamel color were evaluated on Baseline and Day 14. Microhardness were evaluated on Baseline, Days 7 and 14. Statistical analysis was performed using one-way ANOVA and post-hoc Tukey tests. Results : All the bleached enamel specimens revealed increased whiteness and overall color value. Group 1 showed the lowest microhardness values than that of Groups 2, 3, 4 and 5. In all groups, the hardness of tooth after bleaching showed a significant decrease in the microhardness as compared with the one prior to tooth bleaching. The specimens treated with remineralizing agents showed relatively less reduction in enamel microhardness than control group. Conclusions : The addition of fluoride and CPP-ACP did not impede the whitening effect. The use of remineralizing agents during bleaching treatment can significantly enhance the microhardness of bleached enamel.