• 대한치과보철학회지
• /
• 제55권4호
• /
• pp.436-443
• /
• 2017

과거의 computer-aided design/computer-aided manufacturing (CAD/CAM) 기술 형태는 사용자가 한 제조사의 구성요소만 사용해야 하는 폐쇄적인 시스템이었다면, 현재는 여러 제조사의 구성요소 중 사용자가 필요에 맞는 구성요소를 선택해서 사용할 수 있는 유연성을 가진 개방적인 시스템 형태로 변화하였다. 치과재료와 보철물 제작 기술의 발전에도 불구하고 의치 제작은 지난 100년 가까이 전통적인 제작방식을 따랐다. 하지만 최근 들어 기존 의치 제작의 단점을 보완하고자 CAD/CAM 제작 의치에 관한 연구가 활발히 이루어지고 있으며, 밀링이나 3D 프린팅을 이용해 상용화된 형태의 CAD/CAM 제작 의치가 이미 임상에서 쓰이고 있다. 본 증례는 3D face scan을 활용한 CAD/CAM 의치 제작의 가능성을 확인하고, CAD/CAM과 전통적인 방법으로 제작한 의치를 비교한 결과에 대해 보고하고자 한다.

• 구강회복응용과학지
• /
• 제32권2호
• /
• pp.141-148
• /
• 2016

Computer-aided technology는 최근 치과 치료의 흐름이다. DENTCA$^{TM}$ CAD/CAM denture (DENTCA Inc.)는 상용화된 computer-aided design/computer-aided manufacturing (CAD/CAM) 의치 시스템 중 하나로, 한 번의 내원을 통해 의치 제작에 필요한 환자의 모든 정보를 획득하여, 이 정보를 컴퓨터에 저장하고 3D 프린팅을 통해 두 번째 내원 시에 의치 장착을 목표로 한다. 현재까지 여러 증례들은 총의치 제작에 대한 CAD/CAM system의 임상적 적용을 시험해 보았다. 본 증례는 두 명의 환자에서 DENTCA system을 이용한 의치와 전통적인 방법을 이용한 의치를 동시에 제작하여 DENTCA system의 효용성과 한계점을 고찰하였다.

• 대한치과의사협회지
• /
• 제50권3호
• /
• pp.110-117
• /
• 2012

Dental computer-aided design (CAD) and computer-aided manufacturing (CAM) technology have rapidly progressed over the past 30 years. The technology, which can be used in the dental laboratory, the dental office and the form of production centers, has become more common in recent years. This technology is now applied to inlays, onlays, crowns, fixed partial dentures, removable partial denture frameworks, complete dentures, templates for implant installation, implant abutments, and even maxillofacial prostheses. Dentists and dental technicians, who want to use these techniques, should have certain basic knowledge about that. This article gives an overview of CAD/CAM technologies, histories and how it applies in prosthetic dentistry.

• 대한치과의사협회지
• /
• 제52권6호
• /
• pp.332-345
• /
• 2014

In recent years, precision machining of the dental prosthesis by computer assisted system is becoming pervasive in clinical dentistry. Prosthesis fabricating system that is designed by computer software and made by computer devices is called as a CAD/CAM (Computer-Aided Design/Computer-Aided Manufacturing) system. By the use of dental CAD/CAM system, the improvement of marginal compatibility and mechanical properties in prosthesis can be obtained more effectively, an aesthetic quality by using new materials such as zirconia can be increased. Also, the restoration process can be simple and efficient, the production time can be shortened, the process of manufacture can be standardized, and the mass production is possible. What is clear is that these benefits are theoretically possible, but the dentist or dental technician must understand the CAD/CAM basic principles and limitations for obtaining the maximum advantages of CAD/CAM system. For this reason, this article will be presented about the basic principles of CAD/CAM system and the factors of error that might occur in the CAD/CAM process based on my empirical study.

• 대한치과보철학회지
• /
• 제55권2호
• /
• pp.218-224
• /
• 2017

방사선치료를 받은 상악에 임플란트 지지 고정성 보철물을 이용하여 수복하는 것은 골치유능력이 낮기 때문에 상세한 치료계획이 필요하다. All-on-4 개념에 의한 임플란트 식립은 골이식을 피하면서 임플란트를 매식할 수 있어 유리하다. 일반적으로 경사된 임플란트에는 기성 경사형 지대주를 사용해왔다. 본 임상증례에서는 computer-aided design and computer-aided manufacturing (CAD/CAM)으로 제작된 지대주를 사용하였다. 본 증례는 all-on-4 개념에 의해 임플란트를 매식하고 CAD/CAM titanium 지대주를 제작한 다음 CAD/CAM zirconia 고정성 보철물로 수복하여 좋은 결과를 얻었기에 보고하고자 한다.

• 대한치과보철학회지
• /
• 제56권3호
• /
• pp.188-198
• /
• 2018

목적: 최근 디지털 기술의 발달과 더불어 치과영역에서도 다양한 보철물 제작을 위해 Computer aided design/computer aided manufacture (CAD/CAM) 시스템의 사용이 확대되고 있다. CAD/CAM 시스템은 전통적인 방식의 보철물 제작의 단점을 극복하여, 치과의사와 치기공사가 보철물을 제작할 때, 환자에게 한 두 번의 병원 방문으로도 정확하고 정밀도 높은 보철물의 제공이 가능하게 할 수 있다. 본 논문은 현재 국내의 CAD/CAM 시스템 현황 및 인식을 파악함으로써 새로 장비를 도입할 때 고려해야 할 항목에 대한 조언을 제공하고자 한다. 대상 및 방법: 본 설문 조사는 서울대학교 치과 병원을 포함한 전국 298 명의 치과의사, 치과위생사 및 치과기공사를 대상으로 2016년 11월부터 12월까지 2 개월간 우편을 통해 실시하였다. 결과: 치과용 CAD/CAM 밀링기 구매 시 가장 고려하는 요인은 밀링기의 성능(64.43%)이었으며 용도는 치과보철물 제작과 임플란트용 맞춤형 지대주 제작이 49.33%로 가장 높았다. 또한, 응답자의 약 60% 이상이 CAD/CAM 밀링기가 만족할 만한 성능으로 개선된다면 새로운 장비의 구매에 대해 긍정적인 답변을 보였다. 결론: 설문조사 분석결과, 성능이 개선된 CAD/CAM 밀링기 디지털화 및 4차 산업혁명을 대비하는 치과산업에서 중요한 역할을 할 것으로 여겨진다.

• 대한치과의사협회지
• /
• 제50권3호
• /
• pp.118-125
• /
• 2012

CAD/CAM systems (computer-aided design / computer-aided manufacturing) used for decades in restorative dentistry have its application to implant dentistry. This study aimed to overview CAD/CAM systems used implant dentistry, especially emphasizing custom implant abutments manufacturing. CAD/CAM custom abutments present the advantages of being specific to each patient and providing a better fit than the stock and cast custom abutments. This cutting edge technology of virtual-designed and computer-milled implant abutments will likely replace traditional implant restorative protocols and become the standard for implant dentistry in the foreseeable future.

• The Journal of Advanced Prosthodontics
• /
• 제10권3호
• /
• pp.245-251
• /
• 2018

PURPOSE. To evaluate the accuracy of a model made using the computer-aided design/computer-aided manufacture (CAD/CAM) milling method and 3D printing method and to confirm its applicability as a work model for dental prosthesis production. MATERIALS AND METHODS. First, a natural tooth model (ANA-4, Frasaco, Germany) was scanned using an oral scanner. The obtained scan data were then used as a CAD reference model (CRM), to produce a total of 10 models each, either using the milling method or the 3D printing method. The 20 models were then scanned using a desktop scanner and the CAD test model was formed. The accuracy of the two groups was compared using dedicated software to calculate the root mean square (RMS) value after superimposing CRM and CAD test model (CTM). RESULTS. The RMS value ($152{\pm}52{\mu}m$) of the model manufactured by the milling method was significantly higher than the RMS value ($52{\pm}9{\mu}m$) of the model produced by the 3D printing method. CONCLUSION. The accuracy of the 3D printing method is superior to that of the milling method, but at present, both methods are limited in their application as a work model for prosthesis manufacture.

• Journal of Yeungnam Medical Science
• /
• 제41권2호
• /
• pp.80-85
• /
• 2024

Background: This study aimed to compare and evaluate the marginal fit of nanocomposite computer-aided design/computer-aided manufacturing (CAD/CAM) inlays. Three types of nanocomposite CAD/CAM blocks (HASEM, VITA Enamic, and Lava Ultimate) were used as materials. Methods: Class II disto-occlusal inlay restorations were prepared on a typodont mandibular right first molar using diamond rotary instruments. The inlays were fabricated using CAD/CAM technology and evaluated using the silicone replica technique to measure marginal gaps at five locations on each inlay. The data were analyzed by two-way analysis of variance and Tukey post hoc tests (α=0.05). Results: There were no significant differences in the marginal gaps based on the type of nanocomposite CAD/CAM inlay used (p=0.209). However, there was a significant difference in the marginal gaps between the measurement regions. The gingival region consistently exhibited a larger marginal gap than the axial and occlusal regions (p<0.001). Conclusion: Within the limitations of this in vitro study, the measurement location significantly influenced the marginal fit of class II disto-occlusal inlay restorations. However, there were no significant differences in the marginal gaps among the different types of CAD/CAM blocks. Furthermore, the overall mean marginal fits of the class II disto-occlusal inlay restorations made with the three types of nanocomposite CAD/CAM blocks were within the clinically acceptable range.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제38권
• /
• pp.2.1-2.9
• /
• 2016

Background: We reviewed the biological and mechanical properties of porous hydroxyapatite (HA) compared to other synthetic materials. Computer-aided design/computer-aided manufacturing (CAD/CAM) was also evaluated to estimate its efficacy with clinical and radiological assessments. Method: A systematic search of the electronic literature database of the National Library of Medicine (PubMed-MEDLINE) was performed for articles published in English between January 1985 and September 2013. The inclusion criteria were (1) histological evaluation of the biocompatibility and osteoconductivity of porous HA in vivo and in vitro, (2) evaluation of the mechanical properties of HA in relation to its porosity, (3) comparison of the biological and mechanical properties between several biomaterials, and (4) clinical and radiological evaluation of the precision of CAD/CAM techniques. Results: HA had excellent osteoconductivity and biocompatibility in vitro and in vivo compared to other biomaterials. HA grafts are suitable for milling and finishing, depending on the design. In computed tomography, porous HA is a more resorbable and more osteoconductive material than dense HA; however, its strength decreases exponentially with an increase in porosity. Conclusions: Mechanical tests showed that HA scaffolds with pore diameters ranging from 400 to $1200{\mu}m$ had compressive moduli and strength within the range of the human craniofacial trabecular bone. In conclusion, using CAD/CAM techniques for preparing HA scaffolds may increase graft stability and reduce surgical operating time.