• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.760-761
• /
• 2011

본 연구에서는 치과용 유니트체어의 용수공급 시스템 중 수관 내부에 생성되는 바이오필름을 보다 효율적으로 제거하기위하여 공기와 물을 혼합한 버블을 생성하고 가변적인 압력을 인가하여 살균과 세척을 동시에 수행할 수 있는 시스템을 개발하고자 하였다. 이를 위하여 공기와 물의 혼합 세척을 통한 바이오필터 세척 및 전기분해를 이용한 용수 살균 시스템을 구현하였으며, 물과 공기의 흐름제어 및 가변적인 압력 조절 제어시스템을 구현하였다. 그리고 무선으로 제어가 가능한 솔레노이드밸브로 구성된 벨브조립체를 구성하여 세척모드 및 용수공급모드의 선택적 운용이 가능한 시스템을 구현하였다.

• Journal of dental hygiene science
• /
• v.8 no.3
• /
• pp.183-187
• /
• 2008

The objective of this study was to assess the level of contamination of dental equipment surfaces by Staphylococcus aureus and to obtain basic information for the prevention against cross infection between students and outpatients. Human samples were collected by rubbing the oral cavity, anterior noses, and lip of students and outpatients with sterile cotton swabs. Environmental samples were collected from 11 sites at practical laboratory, 4 sites at seminar room, and 5 sites at sterilizing room before, during, and after clinical procedures. These samples were cultured on brain-heart infusion agar at $37^{\circ}C$ for 24 hours. Gram-stained and identified as S. aureus colonies were counted each period and these results were analyzed by t-test and ANOVA test. In human, oral cavity showed the greatest S. aureus counts and there were no statistically significant differences between students and outpatient. Practical laboratory revealed the greatest S. aureus among all environmental groups. The greatest number of S. aureus was observed during clinical procedures (P < 0.05) and light handles, chair head, and spittoon showed a high level of statistically significant differences. In conclusion, S. aureus was dispersed in human and dental clinical environment and increased their number during clinical procedures.

• Journal of dental hygiene science
• /
• v.13 no.4
• /
• pp.403-409
• /
• 2013

The purpose of this study was to evaluate the correlation between caries experience, Quantitative Light-Induced Fluorescence-Digital (QLF-D) redings and new caries activity test (Cariview) results in preschool children. Fifty-seven healthy kindergarten children (male 28, female 29) were participated this study. The calibrated dentist investigated the caries experience of children and new caries activity test. Cariview samples were incubated in the activated medium at $37^{\circ}C$ for 48 hours. All QLF-D taking and readings were performed by one experienced and trained operator under identical conditions in a dental unit chair located in a darkened room. Analysis range was limited to the maxillary and mandibular anterior teeth. QLF-D redings (white spot and dental plaque) were analysed using QLF system. The dft index had a relatively high correlation with the QLF-D redings (white spot: r=0.617, simple plaque score: r=0.500) (p<0.01). Also, there was significant correlation between dft index and the Cariview score (r=0.286) (p<0.05). However, the Cariview score had no significant correlation between dt index and ft index (p>0.05). QLF-D can be evaluated objectively the initial caries lesions and dental plaque correlated with caries experience. Therefore, QLF-D will be useful to the study of caries prediction.

• Physical Therapy Rehabilitation Science
• /
• v.10 no.4
• /
• pp.438-443
• /
• 2021

Objective: The purpose of this study was to determine the effect of the difference in mask filters on the respiration rate of healthy people. Design: A randomized cross-over design. Methods: A total of 15 subjects were selected for this study (n=15). After filling out the Physical Activity Readiness Questionnaire, the selected participants abstained from caffeinated beverages and meals 30 minutes before and sat in a chair 10 minutes before stabilizing their breathing. Afterwards, the lung function test was performed 3 times for each mask, and the maximum value was used. The provided masks were Mask Free, Dental Mask, KF80, and KF94. Exhalation was measured for 6 seconds for each mask, and breathing was stabilized by repeating inhalation and exhalation until the next time. Results: In this study, the difference in respiratory function according to the mask type was statistically significant except for FEV1 and FVC (p<0.05). As a result of post-hoc analysis, FVC, FEV1, PEF, and FEF values were significantly lower than those of the control group not wearing a mask (p<0.05). When wearing KF94, FVC, FEV1, PEF25-25%, and FEF were significantly lower than when wearing a dental mask (p<0.05). When wearing a KF80 mask, it was significantly lower in FVC and FEV1 than when wearing a dental mask (p<0.05). In FEV1/FVC, the difference by mask type was not statistically significant (p<0.05), but it was lower than the spirometry standard of COPD patients (FEV1/FVC<0.7). Conclusions: As Now that wearing a mask is essential, it has been confirmed that the mask affects the respiratory rate.Therefore, in the case of healthy adults, it is recommended to rest after wearing a mask if attention deficit or headache occurs. People with low breathing capacity are recommended to have low-intensity activities and frequent rest periods after wearing a mask.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.1
• /
• pp.91-95
• /
• 2009

The use of stainless steel crowns are indicated for restoration of primary or permanent molars with proximal dental caries, extensive dental caries, or previous pulp treatment with increased danger of tooth fracture. Stainless steel crowns were introduced by Humphrey in 1950. For their improved durability, longevity, and success rate, they have been strongly considered for restoring extensive and multi-surfaced dental caries of molars in pediatric dentistry. However, they also have shortcomings, such as possibility of pulpal exposure or damaging proximal surface of adjacent teeth. In addition, when oversized stainless steel crowns are used, eruption of the adjacent permanent teeth may be disturbed by their prominent margin. As a means to compensate the shortcomings of stainless steel crowns, use of orthodontics bands may be considered. It is an alternative restoration method, where an orthodontic band is placed on a tooth first and cavity is restored with filling material, such as composite resin, glass ionomer, or amalgam. The use of an orthodontic band is indicated for molar restoration with cervical dental caries, extensive dental caries, enamel hypoplasia, or previous pulp treatment. Because it requires shorter chair time compared to stainless steel crown, its application is very useful for children with poor behavior. However, restoration using an orthodontic band requires good oral hygiene after its application. This case report illustrates the conservative restoration of primary molars and permanent molars with extensive dental caries using orthodontic bands.

• Restorative Dentistry and Endodontics
• /
• v.44 no.4
• /
• pp.38.1-38.8
• /
• 2019

Navigation of the main root canal and dealing with a dens invaginatus (DI) is a challenging task in clinical practice. Recently, the guided endodontics technique has become an alternative method for accessing root canals, surgical cavities, and calcified root canals without causing iatrogenic damage to tissue. In this case report, the use of the guided endodontics technique for two maxillary lateral incisors with multiple DIs is described. A 16-year-old female patient was referred with the chief complaint of pain and discoloured upper front teeth. Based on clinical and radiographic findings, a diagnosis of pulp necrosis and chronic periapical abscess associated with double DI (Oehler's type II) was established for the upper left lateral maxillary incisor (tooth #22). Root canal treatment and the sealing of double DI with mineral trioxide aggregate was planned for tooth #22. For tooth #12 (Oehler's type II), preventive sealing of the DI was planned. Minimally invasive access to the double DI and the main root canal of tooth #22, and to the DI of tooth #12, was achieved using the guided endodontics technique. This technique can be a valuable tool because it reduces chair-time and, more importantly, the risk of iatrogenic damage to the tooth structure.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.3
• /
• pp.339-347
• /
• 2010

Enhancement of bond strength between new and old composite usually requires increasing the surface roughness to promote mechanical interlocking. This study evaluated the effect of different surface treatments on repair bond strength of resin composite after aging condition. Air abrasion with Al2O3, chairside silicacoating, and silanization provided higher resin-resin bond strength values compared to control group and HF group. Air abrasion is necessary to repair a resin restoration and additional application of silane seems to have good effects on bond strength.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.1
• /
• pp.56-62
• /
• 2022

PURPOSE. The aim of this study was to investigate shade changes in fully- and pre-crystalized CAD-CAM lithium disilicate crowns after the required and additional firing processes. MATERIALS AND METHODS. One hundred and five crowns of shade A1 with high translucency were milled out of CAD-CAM lithium disilicate blocks and categorized as follows (n = 15): (1) restorations fabricated from Straumann n!ce with no additional sintering process; (2) restorations fabricated from Straumann n!ce with one additional sintering process; (3) restorations fabricated from Straumann n!ce with two additional sintering processes; (4) restorations fabricated from Amber Mill with one sintering process; (5) restorations fabricated from Amber Mill with two sintering processes; (6) restorations fabricated from IPS e.max CAD with one sintering process; (7) restorations fabricated from IPS e.max CAD with two sintering processes. All restorations were evaluated with a color imaging spectrophotometer. RESULTS. All restorations presented some color alteration from the original shade both after a single and after two firing processes. CONCLUSION. The required and additional sintering processes for restorations fabricated with chairside CAD-CAM lithium disilicate blocks cause an alteration of the original shade selected. Shade A1 high translucency restorations tend to change to a more yellowish B1 shade after a sintering process.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1244-1249
• /
• 2023

Recently, the Kingdom of Saudi Arabia (KSA) announced the development of first-of-a-kind(FOAK) and most advanced futuristic vertical city and named as 'The LINE'. The project will have zero carbon dioxide emissions and will be powered by clean energy sources. Therefore, a study was designed to understand which clean energy sources might be a better choice. Because of its nearly carbon-free footprint, nuclear energy may be a good choice. Nowadays, the development of very small modular reactors (vSMRs) is gaining attention due to many salient features such as cost efficiency and zero carbon emissions. These reactors are one step down to actual small modular reactors (SMRs) in terms of power and size. SMRs typically have a power range of 20 MWe to 300 MWe, while vSMRs have a power range of 1-20 MWe. Therefore, a study was conducted to discuss different vSMRs in terms of design, technology types, safety features, capabilities, potential, and economics. After conducting the comparative test and analysis, the fuel cycle modeling of optimal and suitable reactor was calculated. Furthermore, the levelized unit cost of electricity for each reactor was compared to determine the most suitable vSMR, which is then compared other generation SMRs to evaluate the cost variations per MWe in terms of size and operation. The main objective of the research was to identify the most cost effective and simple vSMR that can be easily installed and deployed.

• Restorative Dentistry and Endodontics
• /
• v.31 no.2
• /
• pp.133-139
• /
• 2006

The purposes of this study were firstly to identify the microbial species on gutta-percha (GP) cones exposed at outpatient clinics using polymerase chain reaction, and secondly to evaluate the rapid sterilization effect of two chemical disinfectants at chair side. It also evaluated the alteration of surface texture of GP cones after 5-min soaking into two chemical disinfectants. A total of 100 GP cones from two endodontic departments were randomly selected for microbial detection using PCR assay with universal primer. After inoculation on the sterilized GP cones with the same microorganism identified by PCR assay, they were soaked in two chemical disinfectants: 5% NaOCl and 2% chlorhexidine for 1, 3, 5, and 10 minutes. The sterilization effect was evaluated by turbidity and subculture. The change of surface textures using a scanning electron microscope was also examined after 5 min-soaking in two chemical disinfectants. Results showed that four bacterial species were detected in 17 GP cones, and all the species belonged to the genus Staphylococcus. Two chemical disinfectants were effective in sterilization with just 1 minute soaking. On the SEM picture of NaOCl-soaked GP cone, a cluster of cuboidal crystals was seen on the cone surface. Present data demonstrate that two chemical disinfectants are useful for rapid sterilization of GP cone just before obturation at chair side, while CHX-soaked GP cone has cleaner surface without crystal precipitation than that of NaOCl-treated cone.