• The korean journal of orthodontics
• /
• v.40 no.5
• /
• pp.334-341
• /
• 2010

Objective: The purpose of this study was to evaluate morphologic differences in the mandibular arch between Egyptian and Korean subjects. Methods: The Egyptian sample consisted of 94 mandibular casts (35 Class I, 32 Class II and 27 Class III). The Korean sample consisted of 462 mandibular casts (114 Class I, 119 Class II, and 135 Class III). The most facial portion of 13 proximal contact areas was digitized from photocopied images of the mandibular dental arches. Clinical bracket points were calculated for each tooth. The subjects were grouped according to arch form to compare the frequency distribution of the 3 arch forms between the ethnic groups in each Angle classification. Results: Egyptians had significantly narrower intermolar and intercanine widths ($p$ < 0.001), and shallower intermolar and intercanine depths ($p$ < 0.001) than Koreans. There was an even frequency distribution of the 3 arch forms within the Egyptian group ($p$ = 0.46). However, in the Korean group, the most frequent arch form was the square arch form (46.7%), while the frequency of the tapered arch form was significantly lower (18.8%). Conclusions: These results might provide helpful information in evaluating morphologic differences between ethnic groups in selection of preformed superelastic archwires.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.1
• /
• pp.117-127
• /
• 1991

When open reduction of maxilla fractures is postponed due to concurrent life-threatening injuries, delayed union may result with malunion or nonunion. If delayed malunion is occurred, significant facial deformity may result, including a dished-out face, irregular retromaxillism with Angle's class III malocclusion, open anterior bite, nasal collapse, telecanthus and malar flattening. The treatment planning for this problem includes cephalometric evaluation anterior and lateral tomograms, dental casts, orthodontic planning, dental planning and use of impression tray to rupture the fibrous tissue casts, orthodontic planning, dental planning and use of impression tray to rupture the fibrous tissue attachment at the fracture site. In this paper, one case presented a 58-year-old female patient with maxilla retrusion after comminuted fracture, who was treated with orthodontic methods of maxillary protraction headgear and Plaster headcap, whereas the other two cases were about male patients who were treated principally with surgically open reduction or Le Fort I-controlled transverse osteotomy with iliac bone graft.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.4
• /
• pp.287-293
• /
• 2017

PURPOSE. To compare the dimensional accuracy of three impression techniques- a separating foil impression, a custom tray impression, and a stock tray impression. MATERIALS AND METHODS. A machined mandibular complete-arch metal model with special modifications served as a master cast. Three different impression techniques (n = 6 in each group) were performed with addition-cured silicon materials: i) putty-wash technique with a prefabricated metal tray (MET) using putty and regular body, ii) single-phase impression with custom tray (CUS) using regular body material, and iii) two-stage technique with stock metal tray (SEP) using putty with a separating foil and regular body material. All impressions were poured with epoxy resin. Six different distances (four intra-abutment and two inter-abutment distances) were gauged on the metal master model and on the casts with a microscope in combination with calibrated measuring software. The differences of the evaluated distances between the reference and the three test groups were calculated and expressed as mean (${\pm}SD$). Additionally, the 95% confidence intervals were calculated and significant differences between the experimental groups were assumed when confidence intervals did not overlap. RESULTS. Dimensional changes compared to reference values varied between -74.01 and $32.57{\mu}m$ (MET), -78.86 and 30.84 (CUS), and between -92.20 and 30.98 (SEP). For the intra-abutment distances, no significant differences among the experimental groups were detected. CUS showed a significantly higher dimensional accuracy for the inter-abutment distances with -0.02 and -0.08 percentage deviation compared to MET and SEP. CONCLUSION. The separation foil technique is a simple alternative to the custom tray technique for single tooth restorations, while limitations may exist for extended restorations with multiple abutment teeth.

• Journal of Periodontal and Implant Science
• /
• v.47 no.6
• /
• pp.381-387
• /
• 2017

Purpose: The aim of this study was to evaluate volumetric and histologic changes in edentulous alveolar ridge areas after ridge preservation using basic fibroblast growth factor-2 (bFGF-2) in combination with collagenated biphasic calcium phosphate (BCP). Methods: The experiments were performed in 6 adult male beagle dogs. The following 3 groups were created: 1) ridge preservation with bFGF-2 and collagenated BCP (experimental group), 2) ridge preservation with collagenated BCP (positive control group), and 3) a negative control group in which no ridge preservation procedure was performed. Volumetric change analysis was performed using an optical scanner and casts. Histological observations were made using light microscopy. Results: After the initial swelling subsided, the magnitude of the volumetric change in the experimental group and positive control group was smaller than in the negative control group. In the experimental group, a distinct trend was observed for the resorption of residual bone and collagen fibers at 4 weeks and for more mature bone and faster healing at 12 weeks. Conclusions: Based on the findings of the present study, bFGF-2 may be considered for use as a therapeutic molecule in ridge preservation procedures.

• The korean journal of orthodontics
• /
• v.34 no.6 s.107
• /
• pp.488-496
• /
• 2004

The purpose of the present study was to investigate the relationship of dental crowding to tooth size and arch dimension in Korean subjects. Two groups of dental casts with Class I molar relationship, were selected on the basis of crowding. One group, consisting of 82 pairs of study cast (29 males and 53 females), exhibited at least 7 millimeters of crowding in each arch. A second group, consisting of 82 sets of study cast (37 males and 45 females), exhibited normal occlusion with little or no crowding. Mesiodistal tooth diameters, and buccal and lingual dental arch widths were measured and compared between the crowding and normal occlusion groups. Significant differences were observed between the two groups not only in arch widths but also in tooth sizes. The results of the present study suggest that both extraction and expansion can be used as a treatment approach for the crowding cases.

• Journal of Technologic Dentistry
• /
• v.38 no.3
• /
• pp.217-224
• /
• 2016

Purpose: This study aimed to generate 3-D occlusal curvatures and evaluate the relationship between the occlusal curvatures and mandibular occlusal morphology factors. Methods: Mandibular dental casts from 25 young adult Korean were scanned as a virtual dental models with a 3-D scanner(Scanner S600, Zirkonzahn, Italy). The curve of Spee, curve of Wilson, and Monson's sphere were generated by fitting a circle/sphere to the cusp tips using a least-squares method. The mandibular mesiodistal cusp inclination, buccolingual cusp inclination, and tooth wear parameters were measured on the prepared virtual models using RapidForm2004(INUS technology INC, Seoul, Korea). Wilcoxon signed-rank test was performed to test side difference, and Spearman's rank correlation coefficients were investigated to verify the correlation between occlusal curvatures and correlated factors (a=0.05). Results: The mean radii of curve of Spee were $83.09{\pm}33.94$ in the left side and $79.00{\pm}28.12mm$ in the right side. The mean radii of curve of Wilson were $66.82{\pm}15.87mm$ in the mesial side and $47.87{\pm}9.40mm$ in the distal side with significantly difference between mesiodistal sides(p<0.001). The mean radius of Monson's sphere was $121.85{\pm}47.11mm$. Most of the cusp inclination parameters showed negative correlation for the radius of Monson' sphere(p<0.05). Especially, the buccolingual cusp inclinations in mesial side of molar showed high correlation coefficients among the factors(p<0.05). Conclusion: The radius of Monson's sphere was greater than the classical 4-inch values, and the buccolingual cusp inclinations in mesial side of molar can be considered as one of the main factors correlating with the radius of Monson's sphere.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.6
• /
• pp.338-343
• /
• 2020

PURPOSE. The present study aimed to investigate the relationships between the crown form of the upper central incisor and their labial inclination, overbite, and overjet. MATERIALS AND METHODS. Maxillary and mandibular casts of 169 healthy dentitions were subjected to 3D dental scanning, and analyzed using CAD software. The crown forms were divided into tapered, square, and ovoid based on the mesiodistal dimensions at 20% of the crown height to that at 40%. The degree of labial inclination of the upper central incisor was defined as the angle between the occlusal plane and the line connecting the incisal edge and tooth cervix. The incisal edges of the right upper and lower central incisor that in contact with lines parallel to the occlusal plane were used to determine the overbite and overjet. One-way ANOVA was performed to compare the labial inclination, overbite, and overjet among the crown forms. RESULTS. The crown forms were classified into three types; crown forms with a 20%/40% dimension ratio of 1.00±0.01 were defined as square, >1.01 as tapered, and <0.99 as ovoid. The labial inclination degree was the greatest in tapered and the least in square. Both overbite and overjet in tapered and ovoid were higher than those in square. CONCLUSION. Upper central incisor crown forms were related to their labial inclination, overbite, and overjet. It was suggested that the labial inclination, overbite, and overjet should be taken into consideration for the prosthetic treatment or restoring the front teeth crowns.

• The Journal of the Korean dental association
• /
• v.25 no.9 s.220
• /
• pp.861-872
• /
• 1987

The Purpose of this study was to know the differences between the occlusal plane angles formed by F-H plane on cephalograms and the occlusal plane angles by the upper margin of the articulator, and to ind the contributing factors to the difference of occlusal angles. for this study, 39 young adults (20 men, 19 women) were selected who had normal occlusion, no severe attrition, no missing tooth, not been under orthodontic treatment and occlusal equilibration and no temporomandibular disorders. The maxillary casts were mounted with Hanau 159-1 ear piece type face-bow and measured the occlusal plane angle with prototype occlusal plane projector. The following results were obtained; 1. The mean value of the ear rod F-H plane occlusal angle was 14.75˚, articulator occlusal angle was 9.26˚ and strong positive correlation between these angles, 2. It was almost same angle between the ear rod F-H plane angle (14.75˚) and the beyron point to infraorbital rim-6mm. occlusal angle (14.46˚) 3. The mean distance from the ear rod porion to the Byron point was 5.67mm. 4. It was no significant correlation between the distances Po-Beyron point, Or-infraorbital rim and articulator occlusal angle.

• The korean journal of orthodontics
• /
• v.42 no.5
• /
• pp.255-262
• /
• 2012

Objective: We aimed to compare the retention characteristics of Essix and Hawley retainers. Methods: Adolescents undergoing fixed appliance treatment at 2 centers were recruited for this study. Twenty-two patients (16 women and 6 men) wore Essix retainers (Essix group) while 20 (14 women and 6 men) wore Hawley retainers (Hawley group). The mean retention time was 1 year, and the mean follow-up recall time for both groups was 2 years. Two qualified dental examiners evaluated the blind patient data. Maxillary and mandibular dental casts and lateral cephalograms were analyzed at 4 stages: pretreatment (T1), post-treatment (T2), post-retention (T3), and follow-up (T4). Results: The results revealed that Essix appliances were more efficient in retaining the anterior teeth in the mandible during a 1-year retention period. The irregularity index increased in both arches in both groups after a 2-year post-retention period. The mandibular arch lengths increased during treatment and tended to return to their original value after retention in both groups; however, these changes were statistically significant only in the Hawley group. Cephalometric variables did not show any significant differences. Conclusions: The retention characteristics of both Essix and Hawley retainers are similar.

• The korean journal of orthodontics
• /
• v.47 no.2
• /
• pp.142-147
• /
• 2017

The purpose of this study was to investigate immediate changes in the mandibular dentition after maxillary molar distalization using headgear in non-growing patients. Sixteen patients (mean age, $18.9{\pm}2.0$ years) with Class II molar relationship and crowding were included in the present study. To correct the molar relationship, headgear was used for maxillary molar distalization. Cone-beam computed tomography-generated half-cephalograms (CG Cephs) and dental casts were used to evaluate dental changes for each subject before and immediately after molar distalization using headgear. The mean duration that subjects wore the headgear was 6.3 months. CG Cephs showed that the first maxillary molars were distalized $4.2{\pm}1.6\;mm$ with $9.7^{\circ}{\pm}6.1^{\circ}$ of distal angulation. The intercanine, interpremolar, and intermolar widths of the mandible increased after maxillary molar distalization. The present study's results suggest that maxillary molar distalization using headgear induces a spontaneous response in the untreated mandibular dentition of non-growing patients.