• 대한치과기공학회지
• /
• 제10권1호
• /
• pp.25-41
• /
• 1988

In order to provide the National Dental Health Program with dasic data, and to implove the laborartory managent style, the author studied the operational situations of dental lads through questionaire. The results are as follows, 1. Unlicensured personnel should be replaced by the licensured(from present rate lf 49.2% licensured to more than80%) 2. Minimum wage guarantee system as well as well as oage raise should be established. 3. Monthly balancing accounts system and bepreciation reserve accounts system should be established for the reasonable management. 4. Manufacturing period should be elongated from presnt 2.8 days to 5-7 days for quality betterment of the processes. 5. Medical insurance system should be applied to the dental processes. 6. Manufacturing cost should be increased by 35%. 7. Retirement grants lr retirement annuity system, improvement of occupational environ-ment, and holidays incentives, and participation in medical insurance system should be adopted for the wellfare of the dental technicians. 8. Laboratory managers should operate the lads with pride and valuation. 9. Business Management course should be included in the curriculum of the dental labo-ratory school. 10. Good relationship between Korean Association of Dental Laboratory Technicians and local laboratories shorld be improved.

• 대한치과교정학회지
• /
• 제44권2호
• /
• pp.69-76
• /
• 2014

Objective: This study aimed to evaluate the accuracy and precision of polyurethane (PUT) dental arch models fabricated using a three-dimensional (3D) subtractive rapid prototyping (RP) method with an intraoral scanning technique by comparing linear measurements obtained from PUT models and conventional plaster models. Methods: Ten plaster models were duplicated using a selected standard master model and conventional impression, and 10 PUT models were duplicated using the 3D subtractive RP technique with an oral scanner. Six linear measurements were evaluated in terms of x, y, and z-axes using a non-contact white light scanner. Accuracy was assessed using mean differences between two measurements, and precision was examined using four quantitative methods and the Bland-Altman graphical method. Repeatability was evaluated in terms of intra-examiner variability, and reproducibility was assessed in terms of interexaminer and inter-method variability. Results: The mean difference between plaster models and PUT models ranged from 0.07 mm to 0.33 mm. Relative measurement errors ranged from 2.2% to 7.6% and intraclass correlation coefficients ranged from 0.93 to 0.96, when comparing plaster models and PUT models. The Bland-Altman plot showed good agreement. Conclusions: The accuracy and precision of PUT dental models for evaluating the performance of oral scanner and subtractive RP technology was acceptable. Because of the recent improvements in block material and computerized numeric control milling machines, the subtractive RP method may be a good choice for dental arch models.

• 디지털융복합연구
• /
• 제14권4호
• /
• pp.363-370
• /
• 2016

소음은 원하지 않는 소리로서 소음의 노출은 스트레스와 난청의 원인이 된다. 본 연구에서는 치기공과 학생의 치과기공 소음 노출에 의하여 스트레스와 순음청력에 미치는 영향을 파악하기 위하여 심박변이도와, 공기전도검사와 골전도검사를 실시하였다. 치기공과 학생의 나이, 키와 체중은 대조군과 유사한 결과를 나타냈다. 스트레스의 저항도를 나타내는 심박 표준편차와 부교감신경의 활성과 관련 있는 norm HF는 유의적으로 감소하였으며, 심박수, 교감신경의 지표인 norm LF, 교감신경과 부교감신경의 비율은 유의적으로 증가하였다. 공기전도검사 결과 치기공과 학생의 오른쪽 귀의 125, 250, 500, 1000, 2000, 3000, 4000, 6000 Hz와 왼쪽 귀의 125, 250, 500, 1000, 2000 Hz에서 역치와 골전도검사 결과 오른쪽과 왼쪽 모두 250, 500, 1000, 2000, 4000 Hz에서 역치가 유의적으로 증가하였다. 또한, 순음청력검사 결과를 4분법을 이용하여 어음영역의 평균을 비교한 결과 치기공학과 학생에서의 역치가 모두 유의적인 증가를 보였다. 이와 같은 결과를 종합해 보면, 치기공학과 학생들에게 노출된 치과기공 소음에 의해서도 스트레스의 증가와 청력소실이 유발될 수 있으므로 적절한 예방책을 찾아야 할 것이다.

• 대한치과기공학회지
• /
• 제22권1호
• /
• pp.89-112
• /
• 2000

Although dental laboratory technicians are prone to be exposed to various work-related health hazardous materials such as dusts, chemicals, etc., the prevalence and nature of work-related health problems of them have not been a matter of great concern in the field of occupational health service in Korea. The purpose of the present investigation was to describe a collected profile of subjective health symptoms and their attributable factors in Korean dental laboratory technicians. A questionnaire listing five groups of health symptoms and five health symptom-related factors was mailed to randomly selected 1,900 dental laboratory technicians. Among them, 1,344 dental laboratory technicians filled out the questionnaires and returnde them. Five groups of health symptoms included musculoskeletal symptom, dermal symptoms, respiratory symptoms, eys symptoms, and ear symptoms. Five health symptom-related factors were occupational environment-related health risk factors, work history, health related habits and status, use of personal protective equipment and general characteristics. Detailed parameters of health risk factors were work posture, vibration, and chemical or physical hazards such as dust, fume, vapor, solvent, light, and noise for occupational environment-related factors; work place, area, number of employees, work hours, career, work part, and work load for work history; Broca's index, hours of sleep, eating, smoking, alcohol, exercise, health examination, and self assessed health status for health habits and status; face masks, goggles, and so on for use of personal protective equipment, and; age, sex, marital status, and education for general characteristics. Before the start of main survey, a pilot survey was carried out for validity and reliability tests of the questionnaire. All the data obtained were coded and analyzed with PC/SAS 6.12 program. The prevalence of health symptoms was the highest in musculoskelton (87.3%), and followde by eyes (78.9%), respiratory organs (64.3%), ears (57.8%), and skin (52.2%) in descending order. Statistically significant risk factors by multiple logistic regression analyses were sex, health examination, self assessed health status, and hand/finger posture in musculoskeletal symptoms; sex, self assessed health status, career, acid gas, and hand contact with resin mixture in deraml symptoms; Broka's smoking, exercise, self assessed health status, and face mask in respiratory symptoms; sex, hours of sleep, self assessed health status, work hours, work load, plaster dust, inadequate lighting, and goggle in eys symptoms, and eating, smoking, self assessed health status, and work load in ear symptoms. With the above considerations in mind, prevalence of subjective symptoms among Korean dental laboratory technicians was relatively high, and they were attributable to most of the occupational environment-related factors, work history, use of personal protective equipment, health habits and status, and general characteristics. Particularly, it is suggested that health promotion programs for promoting self- assessed health status and smoking cessation, preventive measures for protection of the female technicians’health, and reducing work load be necessary, since those factors were associated with more than one subjective symptom.

• 대한치과기공학회지
• /
• 제37권4호
• /
• pp.253-259
• /
• 2015

Purpose: The purpose of the study is to investigate the need for the retirement attitude of korean dental technicians. Retirement attitude is important in the study of retirement planning. Methods: A total of 778 dental technicians were selected by proportional stratified by region compared to extraction sampling from a list of korea dental technician association in 2012. The final sample size was 386. Questionnaires consisted of 10 questions general characteristics, 9 questions for the current life satisfaction and retirement preparation, and 4 questions about retirement attitudes on a Likert 5 scale. Cronbach's alpha was 0.812 in the study. All statistical analyzed were performed using SPSS 14.0(Statistical Packages for Social Science Ver. 14.0. Chicago, IL, USA). Results: An average of $3.01{\pm}0.8$ dental technicians were retirement attitude. To affect retirement attitude marital status, age, subjective health status, assets satisfaction, job type, job satisfaction and the economic outlook was living after retirement (p <0.05). Conclusion: This study suggested that retirement attitude of korean dental technicians was very important and the preparation must be connected with the social welfare policy.

• 대한의생명과학회지
• /
• 제20권4호
• /
• pp.201-208
• /
• 2014

This study was conducted to investigate hypoacusis due to workplace noise among dental technicians. Pure tone audiometry, impedance audiometry and heart rate variability were measured for 60 dental technicians and office workers in D city from July to November 2013, and a survey on the effects of noise was conducted. SPSS 19.0 was used for statistical analysis. In the result for threshold of pure tone audiometry, the average hearing threshold of left ears in the air conduction (AC) test showed a statistically significant decrease (P=0.019) among dental technicians, who are frequently exposed to workplace noise. The hearing threshold in the AC test for each frequency was significantly different between the two groups at 125 Hz (P=0.012) in right ears and at 1 kHz (P=0.022), 2 kHz (P=0.040), and 8 kHz (P=0.018) in left ears. Dental technicians who had worked for 16 years or longer had a significantly higher incidence of hypoacusis in the right ear (P=0.030) and in the left ear (P=0.010). In impedance audiometry showed a tympanometry result of type A in both the dental technician group and the office worker group.

• 대한치과기공학회지
• /
• 제42권2호
• /
• pp.149-162
• /
• 2020

Purpose: The purpose of this study was to conduct a cost accounting of implant prosthesis according to the fabrication activities. Methods: In this study, the cost price of implant prosthesis fabrication activities was calculated by the bottom-up costing approach for material and labor cost and the top-down costing approach for expenses and other. Results: The total cost price was estimated to 220,000 ~ 310,000 won per one implant prosthesis. By product, the screw type was estimated to 220,000 ~ 230,000 won, and when the stent and tray were included, it was 260,000 ~ 270,000 won, which increased about 40,000 won. And, the cement type with more material and labor time was estimated to 250,000 ~ 260,000 won, and when the stent and tray were included, it was about 300,000 won. Conclusion: In terms of the fabrication cost ratio by items, it was shown that material cost and labor cost accounted for about 40% and 30% of the total cost structure for resin case, respectively, which was the opposite for porcelain. It was shown that expenses and general administrative expenses accounted for about 15%, and profits were about 11% ~ 14% in both cases.

• 대한치과기공학회지
• /
• 제37권4호
• /
• pp.191-197
• /
• 2015

Purpose: The purpose of this study was to compare the accuracy of the scan data acquired by the extra-oral and intra-oral scanner. Methods: The maxillary right first molar was made of polymethyl methacrylate(PMMA) specimen. This PMMA specimen was scanned with a engineering scanner and intra-oral scanner. Meanwhile, extra-oral scanner scanned stone die duplicated from PMMA master die. Trueness and precision of scan datas was measured by 3-dimensinal inspection. Independent t-test was conduct to analysis the significant difference(a=0.05). Results: In the trueness analysis, mean of discrepancies were 13.82um for intra oral scanner and 16.84 um for extra-oral scanner. In the precision analysis, mean of discrepancies were 11.72 for inta-oral scanner and 9.2 for extra-oral scanner. Both trueness and precision showed a statistically significant difference (Table 1, p<0.05). Conclusion: Intra-oral scanner can show higher trueness than extra-oral scanner, it has lower precision.

• 대한치과기공학회지
• /
• 제20권1호
• /
• pp.21-25
• /
• 1998

A detailed description of the Laboratory Processing procedures for Soft Base Denture that varies from those offered by the manufacturer has provid to be effective. As follows ; 1. Pomotion of patient's comfortability 2. increase in denture retention 3. because of the same heat-curing denture materials used improves bonding & endurance 4. often used denture refitting 5. reducing the rate of alveolar absorption The processing for soft base denture is very sensitive, consequntly.

• 대한치과기공학회지
• /
• 제41권2호
• /
• pp.93-100
• /
• 2019

Purpose: This study is making a dog dental prosthesis using digital dental technology. The mechanical strength of the prosthetic material was observed in terms of compressive strength and fracture pattern. Methods: The experiment was performed using dog mandibular molars. The teeth were scanned and modeled. The specimens were made of zirconia, PMMA and Ni-Cr. The specimens were subjected to a vertical compression test with an artificial cancellous bone in UTM tester. Vertical compressive strength and fracture behavior of specimen were observed. Results: The result of observing the compressive load between specimen and artificial bone were $184.8{\pm}5.7N$ in the zirconia specimen, $185.6{\pm}8.9N$ in the PMMA specimen, and $184.4{\pm}4.0N$ in the Ni-Cr alloy specimen. Compression marks of artificial bones were observed. The fracture strength of specimen was observed. The fracture strength of the zirconia specimen was an average of 1,381.4N. The fracture strength of the PMMA specimen was an average of 572.2N. Conclusion: The crown made of three kinds(zirconia, PMMA, Ni-Cr alloy) of materials has the strength to chew about the artificial bone. zirconia and PMMA have vertical compressive strength applicable to medium dog dental prosthetic materials.