• Journal of Periodontal and Implant Science
• /
• 제38권3호
• /
• pp.551-556
• /
• 2008

Purpose: Cemental tear is an uncommon form of root fracture that can lead to rapid localized attachment loss. When it is exposed in the periodontal pocket, it should be removed to prevent accumulation of dental plaque and calculus. Material and Methods: 2 patients were diagnosed as a cemental tear and they were treated with conventional flap operation and subgingival curettage. Additional treatments such as bone graft or guided tissue regeneration were not performed. Result: Symptoms subsided after the treatment. Periodontal pocket has been reduced but no gain of clinical attachment was observed. Remnant of cemental fragment remained after curettage. However, periodontal pocket was stably maintained and there was no recurrence. Conclusion: Periodontal attachment loss associated with cemental tear can be successfully treated with conventional periodontal surgical and nonsurgical procedures.

• 대한치과보철학회지
• /
• 제49권3호
• /
• pp.254-262
• /
• 2011

연구 목적: 기존의 기계절삭 가공된 티타늄 표면에 생체활성 유기물질이 코팅된 생체 활성 임플란트에 관한연구가 최근에 많이 이루어지고 있다. 이러한 생체 활성 임플란트는 임플란트 자체에 골치유 및 골형성 효과를 부여할 수 있다. 본 연구의 목적은 생체 활성 임플란트 표면에 대한 연구 동향을 분석함으로써, 표면처리 기술 개발의 현황과 향후 발전 전망에 대해서 알아보고자 하였다. 연구 재료 및 방법: 본 문헌 분석 연구는 'Web of Science (http://isiknowledge.com, Thomson Scientific)'를 통해 SCI (science citation index) 등재 논문들을 기반으로 분석하였다. 주제별로 연구비중을 비교하기 위해서, 임플란트 표면 코팅에 사용되는 생체활성 유기물들로 키워드를 선정하고 각 키워드로 대표되는 리서치 그룹을 선정하여 각 그룹들의 연구 동향을 분석하였다. 또한 키워드별로 동물실험 동향을 분석하여 상용화 가능성에 대해서도 고찰하였다. 결과: 연구의 비중은 콜라겐, 피브로넥틴, 골형성단백질, RGD (Arg-Gly-Asp) 순으로 나타났으며, 콜라겐을 이용한 연구가 40%로 가장 많은 연구가 이루어지고 있었다. 네가지 주제 모두 시간의 경과에 따라 연구횟수가 증가하는 양상을 보였으며, 특히 RGD에 관한 연구횟수가 가장 급격하게 증가하였다. 콜라겐 대표 리서치 그룹의 연구 동향을 분석하였을 때, 콜라겐은 단독 사용보다는 다른 생체활성 유기물 및 무기물과의 병용 처치에 관해 주로 연구가 되고 있었으며, 특히 세포외기질인 콘드로이틴 설패이트와의 병용 처치에 관한 연구가 가장 많이 이루어지고 있는 것으로 나타났다. 골형성단백질의 대표 리서치 그룹들에서는 rhBMP-2 (recombinant human bone morphogenetic protein-2)에 관한 연구가 주로 이루어지고 있었다. 동물실험에 관한 연구 동향 분석 결과 콜라겐은 차폐막 혹은 약물 전달 매체로서 주로 사용되고 있었고, 골형성단백질은 치조골이식술 혹은 임플란트 표면 코팅에 대한 효과가 연구되고 있었다. 결론: 연구 결과를 주제별로 분석하였을 때 주제별로 일관성 있는 결과를 얻기 어려웠으며, 보다 나은 결과를 얻기 위한 기계적 표면처리와 여러 세포외기질, 성장인자 등의 생체물질의 최상의 조합을 찾기 위한 노력이 진행중이었다. 연구가 초기단계에 머물고 있기 때문에 상용화에 이르기까지는 많은 시간과 노력이 필요할 것이다.

• 대한치과보철학회지
• /
• 제46권5호
• /
• pp.479-489
• /
• 2008

목적: 상악 구치부에서 자연치와 임플란트 보철시, 보철치관/고정체 비율에 따른 응력분포 양상을 비교하고자 했다. 재료 및 방법: 자연치 모델의 경우는 획득한 3차원 인체모델을 상악 좌측 제2소구치 및 제 1대구치가 포함된 상악골을 Box 형태의 3차원 유한요소모델로 변환하였고, 임플란트 모델은 3차원 인체모델에서 치아 부분을 제거하고 동일 부위에 임플란트 모델을 연결하는 과정을 거쳐서 임플란트가 삽입된 유한요소모델을 구성하였다. 치관/고정체 비율을 0.7:1, 1:1, 1.25:1이 되도록 골수준 (bone level)을 조정하였으며 각 모델의 치관 부위에 300 N의 수직 하중과 수평하중을 각각 가했다. 결과: 1. 모든 하중 조건하에서 자연치와 임플란트 모두에서 피질골과 인접하는 경부에 응력이 집중되는 양상을 보였다. 2. 치관/치근 (고정체) 비가 증가함에 따라 자연치와 임플란트 모두에서 교합면에 수직적 하중을 가한 경우에는 응력의 변화가 뚜렷하지 않았으나, 수평적 하중을 가한 경우에서는 응력이 증가하는 양상을 보였다. 3. 자연치의 경우에 치관/치근비가 증가함에 따라 splinting이 응력감소 효과를 보였고, 임플란트의 경우에는, 치관/고정체 비가 증가함에 따라 splinting이 수직 하중조건에 응력감소효과를 보였으나, 중심에서 벗어난 하중조건에는 최대응력이 오히려 증가하는 양상을 보였다. 4. 임플란트의 경우, 치관/고정체 비가 증가함에 따라 splinting이 수평하중조건 4에서 뚜렷한 응력감소 효과를 보이나, 수평 하중조건 5에서는 응력감소 효과가 감소되고, 특히 치관/고정체 비가 1.25:1인 경우에서는 오히려 응력의 증가를 보였다. 결론: 임플란트 보철물은 치관/고정체 비가 커질수록 더 큰 응력을 받게 되고, splinting의 효과도 감소하게 된다. 또한 교합하중이 임플란트의 장축을 벗어나거나 중심에서 벗어난 경우 응력이 커지는 것으로 사료된다.

• Journal of Periodontal and Implant Science
• /
• 제38권4호
• /
• pp.579-588
• /
• 2008

Purpose: The purpose of this study was to investigate the association of generalized aggressive periodontitis with IL-6 promoter gene single nucleotide polymorphisms(SNP). Material and Methods: The study population consisted of 52 generalized aggressive periodontitis patients(GAP) and 30 periodontally healthy control subjects, who were systemically healthy non-smokers. Genomic DNA was obtained from buccal swab. The IL-6 promotor SNP at the positions of -597, -572, and -174 were genotyped by amplifying the polymorphic region using polymerase chain reaction(PCR), restriction enzyme digestion and gel electrophoresis. Result: The genotype distributions for G/G, G/A and A/A genotypes of IL-6 -597 were 30.8%, 40.4%, and 28.8% in the GAP group and 53.3%, 40%, and 6.7% in the control group and were statistically different between 2 groups(p<0.05). Allele 2 frequency of IL-6 -597 were significantly higher in the GAP group than the control group(p<0.01). At the position of IL-6 -572, the distribution for C/C, C/G and G/G genotypes were 23.1%, 55.8% and 21.2% in the GAP group and 20%, 33.3%, and 46.7% in the control group. In female subjects, the genotype distribution were significantly different between 2 groups(p<0.01). In male subjects, allele 2 frequency of IL-6-572 was significantly lower in the GAP group than the control group(p<0.05). The genotype distribution of IL-6 -174 in the GAP group were 96.2%, 3.8% for G/G, G/C genotypes whereas only the G/G genotype was detected in the control group. Conclusion: In conclusion, significant associations were found in IL-6 gene promoter(-597, -572) polymorphisms and generalized aggressive periodontitis. Further cohort study will be necessary in larger population.

• 대한치과보철학회지
• /
• 제44권1호
• /
• pp.20-28
• /
• 2006

Statement of problem: The titanium has advantages of a high biocompatibility, a corrosion resistence, low density, and cheep price, so it is focused as a substituted alloy But it is quite difficult to cast with the tranditional method due to the high melting point, reacivity with element at, elevated temperature. By using the CAD-CAM system for the crown construction, it is possible to reduce the errors while proceeding the wax-up, investing, and casting procedure Purpose: The purposes of this study were to measure the marginal adaptation of the casting titanium coping and machine-milled titanium coping according to the casting methods and the marginal configurations. Material and method: The marginal configurations were used chamfer shoulder, and beveled shoulder. The total 30 copings were used, and these are divided into 6 groups according to the manufacturing method and marginal configuration. The gap between margin of the model and the restoration was measured with 3-dimensional measuring microscope. Results: The following results were obtained; 1. casting gold coping demonstrated the best marginal seal, followed by casting titanium coping finally machine-milled titanium copings. 2. In casting titanium coping, chamfer demonstrated the best marginal seal, followed by shoulder and beveled shoulder. There was no significantly difference in shoulder and beveled shoulder. But all margin form has clinically acceptable 3. In machine-milled titanium copings, chamfer demonstrated the best marginal seal, followed by shoulder and beveled shoulder. Beveled shoulder show large and uneven marginal gap Conclusions: Above result revealed that marginal adaptation of the titanim coping is avail able in the clinical range, it can be used as an alternative metal and it is prefered especially in chamfer or shoulder margin during implant superstructure fabrication. But there should be more research on machine-milled titanium in order to use it in the clinics.

• 자원리싸이클링
• /
• 제21권1호
• /
• pp.60-65
• /
• 2012

본 연구는 치과용 순 타이타늄 스크랩을 재활용하여 진공 아크 용해에 의해 Ti-6Al-4V 합금을 제조하였고, 이때 산소함량이 다르게 제조된 Ti-6A1-4V 합금의 물성을 평가하였다. 사용된 타이타늄 스크랩은 치과용 임플란트 재료로써 ASTM G1~G4 등급으로 산소함량이 다르게 진공 아크 용해에 의해 건전한 잉곳을 만든 후 Ti-6Al-4V 합금을 제조하였다. 합금 제조시 875 torr의 가압 아르곤 분위기에서 용해하였을 때 Al 조성의 손실이 방지됨을 확인하였다. 제조된 Ti-6Al-4V의 산소함량이 1170~3340 ppm으로 증가함에 따라 Ti-6Al-4V의 경도가 증가하여 순 타이타늄의 경향과 동일함을 확인하였다. 따라서 본 연구를 통해서 Ti-6Al-4V 합금 제조에 있어서 진공 아크 용해에 의해 치과용 순 타이타늄 스크랩의 재활용 가능성을 확인하였다.

• Journal of Periodontal and Implant Science
• /
• 제51권6호
• /
• pp.398-408
• /
• 2021

Purpose: In this study, we aimed to evaluate the clinical validity of the modified tunneling technique using minimal soft tissue harvesting and volume-stable collagen matrix in the anterior mandible. Methods: In total, 27 anterior mandibular teeth and palatal donor sites in 17 patients with ≥1 mm of gingival recession (GR) were analyzed before and after root coverage. For the recipient sites, vertical vestibular incisions were made in the interdental area and a subperiosteal tunnel was created with an elevator. After both sides of the marginal gingiva were tied to one another, a prepared connective tissue graft and volume-stable collagen matrix were inserted through the vestibular vertical incision and were fixed with resorbable suture material. The root coverage results of the recipient site were measured at baseline (T₀), 3 weeks (T₃), 12 weeks (T₁₂), and the latest visit (T_l). For palatal donor sites, a free gingival graft from a pre-decided area avoiding the main trunk of the greater palatine artery was harvested using a prefabricated surgical template at a depth of 2 mm after de-epithelization using a rotating bur. In each patient, the clinical and volumetric changes at the donor sites between T₀ and T₃ were measured. Results: During an average follow-up of 14.5 months, teeth with denuded root lengths of 1-3 mm (n=12), 3-6 mm (n=11), and >6 mm (n=2) achieved root coverage of 97.01%±7.65%, 86.70%±5.66%, and 82.53%±1.39%, respectively. Miller classification I (n=12), II (n=10), and III (n=3) teeth showed mean coverage rates of 97.01%±7.65%, 86.91%±5.90%, and 83.19%±1.62%, respectively. At the donor sites, an average defect depth of 1.41 mm (70.5%) recovered in 3 weeks, and the wounds were epithelized completely in all cases. Conclusions: The modified tunneling technique in this study is a promising treatment modality for overcoming GR in the anterior mandible.

• Journal of Korean Dental Science
• /
• 제6권2호
• /
• pp.50-57
• /
• 2013

Purpose: Autogenous tooth bone graft is proven to be efficient. We evaluated the bone healing effect and clinical capabilities of autogenous tooth bone materials as a scaffold when growth factor is used together with this material. Materials and Methods: Subjects were those who needed implant placement and bone graft because of missing tooth or alveolar bone defect and who kept their autogenous tooth or needed extraction of other tooth. Group I included autogenous tooth bone graft with growth factor, whereas Group II had only autogenous tooth bone graft. We investigated the bone healing state through computed tomography taken just before surgery and 3 to 4 months after surgery to evaluate the effectiveness of bone graft. Group I had 9 patients, whereas Group II had 5 patients. We compared the pre- and post-operative increase of the Hounsfield unit and bone height by analyzing the computed tomography images. Result: Sinus bone grafts numbered 8 cases, and vertical ridge augmentation was performed together with 3 cases of these. Vertical ridge augmentation was performed in 2 cases, and horizontal ridge augmentation in 1 case alone. Socket graft was done in 3 cases. The post-operative mean value of the Hounsfield unit was 960 in Group I and 836.7 in Group II, but the increase was almost similar, i.e., 636.9 in Group I and 634.7 in Group II on the average. Increase of bone height was 7.6 mm in Group I and 11.1 mm in Group II on the average. This difference was attributable to the fact that most of the cases were sinus bone graft in Group II. Conclusion: In this study, we suggest the possibility of autogenous tooth bone graft materials as a scaffold besides their bone healing ability.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제34권2호
• /
• pp.91-99
• /
• 2012

Purpose: The purpose of this study was to evaluate the expression of osteogenic genes associated with bone regeneration on anodizing titanium surface. Methods: $20{\times}20{\times}1$ (mm) commercially pure titanium plate was made, one group was pure titanium, second group was punched, and last group was punched and anodized by electrochemical method. Through the osteogenic cell culture model, the expression of extracellular matrix proteins, such as bone morphogenetic protein-2, bone sialoprotein, aggrecan, osteocalcin, Alkaline phosphatase, collagen I had been evaluated by Real-time polymerase chain reaction, and the morphology of growing cells was evaluated by scanning electron microscopy. Results: The attachment of mesenchymal stem cell was even and well-oriented on all Ti surfaces. The osteogene expression was increased on punching groups but, decreased on anodizing surfaces in 3 week samples. Conclusion: Punched anodizing Ti has possibility be using as a dental implant material, but further in vivo study would be needed.

• 한국재료학회지
• /
• 제15권9호
• /
• pp.585-588
• /
• 2005

Titanium and Titanium alloys are widely used as an orthopedic and dental implant material because of their excellent biocompatibility and mechanical strength. In this study, ECAP Cp-Ti and Cp-Ti were heat treated for different annealing time of 30 min, 90 min and 3 hours. The grain size for each condition was studied. The micro-Vicker hardness test was carried out f3r each different heat treated samples. The micro-Vicker hardness test for ECAP Cp-Ti, Cp-Ti and Cp-Ti (3hr) revealed hardness values of 239.5, 182 and 144 Hv, respectively. The grain size was increased from approximately $70{\mu}m\;to\;300{\mu}m$ with the increase in heat treatment time from 30 min to 3 hours. The heat treated samples were tested for their biocompatibility in simulated body fluid (SBF) and corrosion rates was determined using Polarization Curve test (PCT). The PCT results showed Cp-Ti with comparatively high corrosion potential of -0.18 V and corresponding corrosion current of $2\times10^{-6}$ A, while the corrosion rate in ECAP Cp-Ti and Cp-Ti (30 min annealed) showed very similar results of corrosion potential about -0.47 V with corresponding corrosion current of $7\times10^{-8}$ A.