• The Journal of the Korean dental association
• /
• v.15 no.4
• /
• pp.297-300
• /
• 1977

The author's studies on the blood grouping of dental calculus by the elution technique can produce a very satisfactory result. The results are briefly summarized as follows: 1) In the blood typing with dental calculus obtained from 77 people, it was found that 24 cases out of 26 A group calculus, and 18 cases out of 19 B group, coincided with respective blood groups. From 2 cases of A group calculus and one case of B group calculus gave the results resembling O group. Everyone of 21 cases of O group and 11 cases of AB group, coincided with original known blood groups. 2) Blood groups can be readily identified with small amounts of calculus(2mg) by the elution test.

• Journal of Sensor Science and Technology
• /
• v.21 no.3
• /
• pp.217-222
• /
• 2012

Optical coherence tomography(OCT) is a noninvasive optical imaging tool for biomedical applications. OCT can provide depth resolved two/three dimensional morphological images on biological samples. In this paper, we integrated an OCT system that was composed of an SLED(Superluminescent Light Emitting Diode, ${\lambda}_0$=1305 nm bandwith= 141 nm), a reference arm adopting a rapid scanning optical delay line(RSOD) to get high speed imaging, and a sample arm that used a micro electro mechanical systems(MEMS) scanning mirror. The sample arm contained a compact probe for imaging dental structures. The performance of the system was evaluated by imaging in-vivo human teeth with dental calculus, and the results indicated distinct appearance of dental calculus from enamel, gum or decayed teeth. The developed probe and system could successfully confirm the presence of dental calculus with a very high spatial resolution($6{\mu}m$).

• Current Optics and Photonics
• /
• v.7 no.3
• /
• pp.283-296
• /
• 2023

An intraoral spectral domain optical coherence tomography (SD-OCT) system has been developed, using a custom-built hand-held scanner and spectrometer. The hand-held OCT probe, based on a microelectromechanical systems scanner and a self-built miniaturized drive circuit, had a field of view sufficient for dental diagnosis. The spectrometer using a fabricated f-theta lens provided the image depth required for dental diagnosis. The axial and transverse resolutions of the OCT system in air were 7.5 ㎛ and 12 ㎛ respectively. The hand-held probe could scan an area of 10 × 10 mm², and the spectrometer could image along a depth of 2.5 mm. To verify the utility of the developed OCT system, OCT images of tooth hard and soft tissues were acquired, and a user-interface program for diagnosis was developed. Early caries and microcracks that were difficult to diagnose with existing methods could be found, and the state of restoration could be observed. Measuring the depth of the gingival sulcus, distinguishing subgingival calculus, and detecting an implant under the gingiva suggested the possibility of the SD-OCT system as a diagnostic for dental soft tissues. Through the presented OCT images, the capability of the developed SD-OCT system for dental diagnosis was demonstrated.

• Journal of Korean society of Dental Hygiene
• /
• v.11 no.5
• /
• pp.749-758
• /
• 2011

Objectives : The purpose of this study was to analyse case reports performed through a dental hygiene process and provide basic data on clinical education of dental hygiene. Methods : 154 case reports which collected for six years were analysed. This study applied dental hygiene process model in dental hygiene diagnosis. Dental hygiene diagnosis was more cleared by dental a hygiene process model. Data analysis was performed by the Frequency statistics using SPSS 12.0 for Windows. Results : 1. The clients are mainly comprised 20's university student(91.9%). 2. In assessment phase, clients finished 100% test of subjective data. 3. When applied a dental hygiene process model in dental hygiene diagnosis, students have identified 23 type of dental hygiene problem and analysed dental hygiene problem frequently used as bleeding of gingiva, calculus and deposit of dental plaque. 4. In case of plan of dental hygiene intervention, Fluoride application showed the most high level(98.1%) in clinical intervention. 5. Results of intervention showed that performance rate(98.7%) of scaling is the most high level. Conclusions : Dental hygiene process model is more useful than other diagnostic models in clinical practice based on dental hygiene process.

• Journal of Periodontal and Implant Science
• /
• v.24 no.1
• /
• pp.1-14
• /
• 1994

Dental calculus which is calcifing and/or calcified dental plaque is divided into supragingival calculus and subgingival calculus according to the position of deposit to gingival margin. Subgingival calculus has more important clinical significance in diagnosis and treatment of periodontal disease than supragingival calculus. In order to investigate the deposition pattern of subgingival calculus on each root surface of different tooth type, extracted 192 teeth due to excessive destruction of periodontal tissue were divided according to tooth type and the deposition pattern of subgingival calculus was classified into linear type, veneer type, scattered type, and aggregated type according to the configuration and the extent of deposit. The difference of percentage between each deposition pattern was statistically analyzed by Chi-Square test. Following results were obtained : l. In maxillary incisors, linear type and aggregated type were predominant deposition pattern of subgingival calculus on labial(45.5%, 36.4%) and palatal(36.4%, 36.4%) root surface, aggreated type(72.7%) was on mesial surface, and aggregated type(54.5%) and scattered type(36.4%) was on distal suface. 2. In mandibular incisors, scattered type, linear type and aggregated type were predominant deposition pattern of subgingival calculus on labial(33.3%, 30.6%, 27.8%) and lingual(36.1%, 30.6%, 25.0%) root surface, aggregated type(33.3%), scattered type(27.8% ), and veneer type(27.8%) were on mesial surface, and aggregated type(38.9%) and scattered type(33.3%) on distal surface. 3. In maxillary peremolars, the predominant deposition patterns of subgingival calculus were linear type(28.6%) on buccal root suface, scattered type(35.7%) and linear type(28.6%) on palatal surface, scattered type(39.3%) on mesial surface, aggregated type(46.4%) on distal surface, and aggregated type(53.6%) on furcation area. 4. In mandibular premolars, scattered type was predominant deposition pattern of subgingival calculus on buccal(39.3%) and lingual(50.0%) root surface, scattered type(32.1%) and aggregated type(32.1% ) were on mesial surface, and aggregated type(42.9%) was on distal surface. 5. In maxillary molars, aggregated type(40.0%) and scattered type(32.5%) were predominat deposition pattern of subgingival calculus on buccal root surface, aggregated type was on distal(40.0%) and furcation area(50.0%), but there was no predominat pattern on palatal and mesial root surfaces. 6. In mandibular molars, aggregated type(39.5%) and scattered type(28.9%) were predominant deposition patterns of subgingival calculus on buccal root surface, aggregated type(36.8%) was on lingual surface, linear type(39.5%) and aggregated type(34.2%) were on furcation area, but there was no predominant pattern on mesial and distal root surfaces.

• Journal of Periodontal and Implant Science
• /
• v.48 no.5
• /
• pp.317-325
• /
• 2018

Purpose: We investigated correlations between the findings of oral examinations and panoramic radiography in order to determine the efficacy of using panoramic radiographs in screening examinations. Methods: This study included patients who visited dental clinics at National Health Insurance Service (NHIS) Ilsan Hospital for checkups during 2009-2015 and underwent panoramic radiographic examinations within 1 year prior to the oral examinations. Among the 48,006 patients who received checkups, 1,091 were included in this study. The data were evaluated using the Cohen kappa and interrater agreement coefficients. Accuracy, sensitivity, and specificity were calculated using data from the panoramic radiographs as true positive diagnoses. Results: The interrater agreement coefficient for occlusal caries was 28.8%, and the Cohen kappa coefficient was 0.043 between the oral and panoramic radiographic examinations. Root caries and subgingival calculus were only found on the radiographs, while gingival inflammation was found only by the oral examinations. The oral examinations had a specificity for detecting occlusal dental caries of 100%, while their sensitivity for proximal dental caries and supragingival calculus was extremely low (14.0% and 18.3%, respectively) compared to the panoramic radiographic examinations. The oral examinations showed a relatively low sensitivity of 66.2% and a specificity of 43.7% in detecting tooth loss compared with panoramic radiography. Conclusions: Panoramic radiography can provide information that is difficult to obtain in oral examinations, such as root caries, furcation involvement, and subgingival calculus, which are factors that can directly affect the survival rate of teeth. It therefore seems reasonable and necessary to add panoramic radiography to large-scale health checkup programs such as that provided by the NHIS.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.4
• /
• pp.715-722
• /
• 2022

If you don't regularly go to the dentist to check your teeth, it is difficult to notice cavities or various diseases of your teeth until you have pain or discomfort. Dental plaque is produced by the combination of food or foreign substances and bacteria in the mouth. Starch breaks down from the bacteria that form tartar. The acid that occurs at this time melts the enamel of the teeth and becomes a cavity. So tartar management is important. Poppyrin, the metabolism of bacteria in the mouth, reacts at 405 nm wavelengths and becomes red fluorescent, which can be seen by imaging through certain wavelength filters. By the above method, Frag and tartar are fluorescently detected and photographed with a yellow series of filters that pass wavelengths of 500 nm or more. It uses MATLAB to detect and display red fluorescence through image processing. Using the difference in voltage between normal teeth and tartar through an optical measuring circuit, it was connected to an Arduino and displayed on the LCD. This allows the user to know the presence and location of dental plaque more accurately.

• Imaging Science in Dentistry
• /
• v.53 no.3
• /
• pp.199-207
• /
• 2023

Purpose: The objective of this study was to evaluate the accuracy and effectiveness of an artificial intelligence (AI) program in identifying dental conditions using panoramic radiographs(PRs), as well as to assess the appropriateness of its treatment recommendations. Materials and Methods: PRs from 100 patients(representing 4497 teeth) with known clinical examination findings were randomly selected from a university database. Three dentomaxillofacial radiologists and the Diagnocat AI software evaluated these PRs. The evaluations were focused on various dental conditions and treatments, including canal filling, caries, cast post and core, dental calculus, fillings, furcation lesions, implants, lack of interproximal tooth contact, open margins, overhangs, periapical lesions, periodontal bone loss, short fillings, voids in root fillings, overfillings, pontics, root fragments, impacted teeth, artificial crowns, missing teeth, and healthy teeth. Results: The AI demonstrated almost perfect agreement (exceeding 0.81) in most of the assessments when compared to the ground truth. The sensitivity was very high (above 0.8) for the evaluation of healthy teeth, artificial crowns, dental calculus, missing teeth, fillings, lack of interproximal contact, periodontal bone loss, and implants. However, the sensitivity was low for the assessment of caries, periapical lesions, pontic voids in the root canal, and overhangs. Conclusion: Despite the limitations of this study, the synthesized data suggest that AI-based decision support systems can serve as a valuable tool in detecting dental conditions, when used with PR for clinical dental applications.

• Journal of Korean society of Dental Hygiene
• /
• v.18 no.5
• /
• pp.665-674
• /
• 2018

Objective: The purpose of this study was to reduce the burden on dental hygienists in performing dental hygiene processes in the clinic. This study systematically analyzed dental hygiene problems and dental hygiene planning according to the oral condition of patients by applying an oral health care program based on the dental hygiene process. Methods: This study analyzed influential factors of 17 dental hygiene problems and 12 dental hygiene plans according to the oral health index and charts of 185 patients. This study was approved by the Institutional Review Board (IRB No. 1041449-201801-HR-003) of Silla University. The frequency of dental hygiene problems and dental hygiene planning was analyzed and correlations among the oral health index, dental hygiene problems, and dental hygiene planning were analyzed. Results: The higher the bleeding on probing score was, the more scaling was planned. The higher the calculus rate was, the more air-jet and jaw joint disorder prevention education was planned. The higher the O'Leary index was, the more dietary education and air-jet was planned. The higher the Simplified Oral Hygiene Index was, the more air-jet and jaw joint disorder prevention education was planned. The higher the Periodontal Screening and Recording index was, the more scaling and professional tooth cleaning was planned (p<0.05). Conclusions: The burden of oral preventive duties on dental hygienists will be minimized by systematically establishing problems and planning of dental hygiene according to patients' oral health index scores. Therefore, it is expected that dental hygienist can actively use the dental hygiene process in oral health care programs.

• The Journal of the Korean dental association
• /
• v.50 no.8
• /
• pp.474-481
• /
• 2012

The periodontal flap surgery is the most widely utilized surgical procedure to reduce the pocket depth and to access the subgingival root surfaces for scaling and root planing. The diagnosis of the periodontal lesion and the objective of the surgery will dictate the type of flap procedure which will be utilized to obtain the best result. The incisions, type of flap and the selection of suturing design must be planned and executed to fit the problem. Periodontal flaps are designed to preserve gingival integrity and to gain access to root surfaces for residual calculus removal and to thoroughly remove granulation tissue so bone defects can be visualized and treated. Gentle and efficient procedures result in optimum healing and minimal postoperative pain. When flaps need to be repositioned apically or less often, coronally, then the flaps must sit passively at the appropriate level before suturing. To ensure this, buccal and lingual flaps need to be elevated beyond the mucogingival junction so the elasticity of the mucosa allows for flap mobility. Sometimes it may be necessary to extend the flap elevation apically with a split incision approach to minimize the effect of the less elastic periosteum. Vertical incisions can aid in flap positioning by allow ing the clinician to suture the flap at a different level to the adjacent untreated gingiva. In osseous periodontal surgery, flaps are apically positioned to minimize postoperative pocket depth. In regenerative periodontal surgery including implant surgery, soft tissue cove rage of bony defects, graft materials, membranes, and bio logic agents is important so sulcular incisions and light suturing techniques are crucial.