• 한국농공학회지
• /
• 제18권3호
• /
• pp.4163-4170
• /
• 1976

This study was conducted to investigate the effect of starch as a retarder on the maximum dry density and the unconfined compressive strength of soil cement mixtures for varied starch contents (0-3%), cement contents (3-12%), and delay times (0-6hrs) in four soils. The experimental results obtained from maximum dry density and unconfined compressive strength tests are as follows: 1. Maximum dry density and unconfined compressive strength were increased greatly in soil cement mixtues rwhen starch was added as retarder but their value schanged according to soil varieties. 2. Maximum dry density showed at about 0.5 percent to 1.0 percent of starch in KY soil and about 2.0 percent to 2.5 percent in SS soil when delay time was changed in 2.4, and 6 hours in compaction test. 3. The larger content of cement was, the bigger effects of maximum dry density and compressive strength were in soil cement. mixtures. 4. As delay time changed 2.4, and 6 hours in compaction test, 7-day unconfined compressive strength showed the biggest value at about 0.5 percent of starch in KY soil and 2.0 percent in SS soil, and the maximum value of 28-day unconfined compressive strength showed at about 0.5 percent in KY soil and 1.5 percent in SS soil.

• Journal of Plant Biology
• /
• 제26권3호
• /
• pp.161-171
• /
• 1983

To test whether the Grime's model on relationship between maximum standing crop plus litter (350~750g/$m^2$) and species density (10~30/0.25$m^2$) fit well or not, a total of 52 samples, with 4 replicate plots (0.5m$\times$0.5m each) per sample, was collected from various forests, grass lands and coastal salt marshes in midwestern part of central Korean peninsula from September to October in 1982. The result agrees well with the model for grass lands salt marshes, that is, shape of curve for the maximum standing crop (minus litter) against species density indicates normal distribution. The number of species was 11 for the grassland and 7 for the salt marshes within the range of 300g to 700g per square meter for the maximum standing crop. In forest stands, however, as the maximum standing crop of herbs increased the species density decreased. The Grime's model does not seem to fit with the resutls on forest stands of this study. It is examined further the relationships among the maximum standing crop, species density and eleven soil properties, and the possible cause of this discrepancy was disscused.

• Communications for Statistical Applications and Methods
• /
• 제20권4호
• /
• pp.311-319
• /
• 2013

Cooray and Ananda (2005) proposed a composite lognormal-Pareto model to analyze loss payment data in the actuarial and insurance industries. Their model is based on a lognormal density up to an unknown threshold value and a two-parameter Pareto density. In this paper, we implement the minimum density power divergence estimation for the composite lognormal-Pareto density. We compare the performances of the minimum density power divergence estimator (MDPDE) and the maximum likelihood estimator (MLE) by simulations and an example. The minimum density power divergence estimator performs reasonably well against various violations in the distribution. The minimum density power divergence estimator better fits small observations and better resists against extraordinary large observations than the maximum likelihood estimator.

• Tribology and Lubricants
• /
• 제17권4호
• /
• pp.297-306
• /
• 2001

Under the condition of variable density and specific heat, maximum pressure, maximum temperature, bearing load, friction and side leakage in high-speed journal bearing operation are examined within some degree of Journal misalignment. The results are compared with the calculation results under the conditions of constant density and specific heat, and variable density and constant specific heat. It is found that the condition of variable density and specific heat play important roles in determining friction and load of Journal bearing at high speed operation.

• 한국산림과학회지
• /
• 제89권5호
• /
• pp.634-644
• /
• 2000

본 연구에서는 ha당 단면적이 최대가 되는 임목본수가 그 임분이 유지시킬 수 있는 최대임목본수라는 Sterba의 이론을 강원도지방 소나무의 임시표본점 조사자료에 적용시켜 강원도지방 소나무 동령임분의 최대임목본수 및 고사모델을 유도하였다. ha당 임목본수와 우세목수고를 변수로 하여 평균흉고직경을 추정하는 평균흉고직경식의 통계적 신뢰성은 매우 높았으며, ha당 임목본수 및 우세목수고에 따른 흉고직경생장의 변이를 잘 설명해 주었다. 또한, 이 평균흉고직경식으로부터 유도되는 ha당 흉고단면적식은 ha당 임목본수의 변화에 따른 ha당 흉고단면적의 변화를 우세목수고별로 잘 나타내 주었다. ha당 흉고단면적이 최대가 되는 임목본수로 부터 우세목수고 및 흉고직경별로 유도되는 최대임목본수곡선은 임목본수 관측치의 상부를 지나면서 임분의 최대임목본수를 잘 나타내 주었다. 또한, 평균흉고직경에 대한 최대임목본수식으로부터 추정되는 최대임분밀도지수는 임분의 최대잠재밀도를 나타내는 지수로 활용할 수 있었다. 본 연구에서 제시한 최대임목본수식 및 최대임분밀도지수식은 최대밀도에 도달한 임분자료를 근거로 하는 것이 아니라 다양한 밀도를 나타내는 임분으로부터 조사된 자료를 근거로 한다는 특징이 있으며, 이를 이용하면 고사량추정, 최대잠재생산량추정 둥 임분밀도관리에 필요한 정보를 마련할 수 있다.

• Journal of the Korean Wood Science and Technology
• /
• 제19권3호
• /
• pp.27-34
• /
• 1991

Screw withdrawal test was carried out on the face and edge of domestic particleboard and medium density fiberboard in order to evaluate optimum pilot hole diameter. The obtained results were as follows: 1. Maximum withdrawal strengths on the face and edge of particleboard were obtained with pilot hole diameters at about 50% of root diameters of screw. 2. Maximum withdrawal strength on the face and edge of medium density fiberboard were obtained with pilot hole diameters that were about 60% and 50% of root diameters of screw, respectively. 3. Withdrawal strength showed about 91% of maximum withdrawal strength when pilot holes were not pre bored at particleboard. but when pilot holes at 90% of root diameter of screw withdrawal strength showed about as 51.3% of maximum withdrawal strength. 4. Withdrawal strength showed about 88% of maximum strength when pilot holes were not used, but withdrawal strength indicated 55.4% of maximum strength in case of 90% of root diameters of screw. 5. Maximum withdrawal strength on the face of particleboard was about 70.5% higher than that of the edge, and however medium density fiberboard was about 19.6% higher than that of the edge.

• 대한기계학회논문집A
• /
• 제25권7호
• /
• pp.1155-1162
• /
• 2001

Sihs minimum strain energy density criterion(SED) often used in the mixed mode problem has the ambiguity of the choice of minimum values. In this paper, as the method to solve the problem of SED, maximum minimum strain energy density criterion is proposed that the crack propagates in the direction of having the maximum among the minimum values of modified strain energy density factor(MS), i.e., sign($\sigma$(sub)$\theta$).Smin.

• 열처리공학회지
• /
• 제11권4호
• /
• pp.241-246
• /
• 1998

It is well known for 410L ferritic stainless steel powder to applicate a sensor ring in anti-lock brake system of automobile, several studies, because of its excellent magnetic properties. This study was carried out to investigate the magnetic properties such as the maximum magnetic induction, coercivity and maximum permeability of the materials with functions of sintering density, time and temperature, and concluded as follows: 1. Sintering under the circumstances of Ar gas and the temperature of $1250^{\circ}C$ for 60min, showed that nitrogen was increased, whereas carbon and oxygen decreased in quantities. 2. Both maximum magnetic induction value of 4700Gauss and permeability of 200 were obtained at the maximum sintering density of $6.89g/cm^2$. Here, the properties showed a linear increasement with increasing the sintering density. 3. Coercivity sharply decreased with incresing the sintering density and reached to 7.6Oe at the maximum sintering density of $6.89g/cm^2$.

• Journal of the Korean Statistical Society
• /
• 제32권3호
• /
• pp.261-270
• /
• 2003

This paper introduces a new density estimator which is Hellinger consistent under a simple condition. A number of issues are discussed, such as extension to Kullback-Leibler consistency, robustness, the Bayes version of the estimator and the maximum likelihood case. An illustration is presented.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1173-1176
• /
• 1995

We design and analyze two type stators for brushless DC linear motors by the experiment and the computational analysis. For a U-shape stator, the maximum manetic flux density by the finite element method(FEM) is large than that by the experiment by 1.0~2.2%. The result by the FEM is so accurate that it can be applied to the geometric design for the optimization. To increase the maximum magnetic flux density, we suggest an improved stator and analyze it by the 3-D and 2-D models. The maximum magnetic flux density of the improved stator is large than that of the U-Shape stator by 2.7%. Considering the size of the improved stator and maximum magnetic flux density, we determine that the optimized thickness is 5mm for a given specification.