• 펄프종이기술
• /
• 제31권5호
• /
• pp.73-85
• /
• 1999

Yield and fracture are separated in the tensile failure of paper. Failure in the machine direction of photocopy paper is contrasted with failure in the cross-machine direction . The ratios of distortion (shape change) to dilatation (volume change) for individual elements at yield and fracture are described. The ratios of distortion to dilatation are measured and compared to predicted values of the strain energy density theory. To evaluate the effect of the angle from the principal material direction on the strain energy density theory. To evaluate the effect of the angle from the principal material direction on the strain energy density factor, samples are prepared from machine direction to cross-machine direction in 15 degree intervals. the strain energy density of individual elements are obtained by the integration of stress from finite element analysis with elastic plus plastic strain energy density theory. Poison's ratio and the angle from the principal material direction have a great effect ion the ratio fo distortion to dilatation in paper. During the yield condition, distortion prevails over dilatation . At fracture, dilatation is at a maximum.

• 조명전기설비학회논문지
• /
• 제25권12호
• /
• pp.42-47
• /
• 2011

The design of road lighting is aiming illuminance and luminance requirements for road lighting. In the process, various factors associated with luminaires such as luminous efficacy, light distribution, mounting height, spacing and maintenance factor are considered. However, there has been no restriction on lighting power density. In this study, lighting power density has been comparatively analyzed through a study of related data and a result of measurements on domestic roads. And, it has been analyzed by simulation results for road in which lighting conditions are variable. In terms of the limitation on power density for road lighting, road lighting can be designed using high efficacy lighting systems for energy saving.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.202-202
• /
• 2011

Diagnostics of plasma density is a key factor for monitoring plasma processing. Various probes are invented to measure plasma density and cut-off probe is a one of the most promising diagnostics tool for measuring plasma density. However, at the low density or high pressure the cut-off probe cannot clearly resolve the cut-off peak. Several reasons make this problem: Cut-off likes peaks caused by cavity resonances and weaken transmission spectrum signal at high pressure. Recently, You et al., have researched mechanism of cut-off probe and we improve the cut-off reliability and sensitivity base on that research. Modified cut-off antenna is adapted and bias cut-off probe method is tried. These experiment results have good agreement with the previous study and show good measurement characteristics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1435-1438
• /
• 1994

The effects of Ge composition variation in $a-Si_{1-x}Ge_x:H$ alloy p-i-n solar cells on the physical properties and current density-voltage characteristics are analyzed by a new simulation modelling based on the update published experimental datas. The simulation modelling includes newly formulated density of gap density spectrum corresponding to Ge composition variation and utilizes the newly derived generation rate formulars which include the reflection coefficients and can apply to multijunction structures as well as single junction structure. The effects in $a-Si_{1-x}Ge_x:H$ single junction are analyzed through the efficiency, fill factor, open circuit voltage, short circuit current density, free carriers, trap carriers, electric field, generation rate and recombination rate. Based on the results analyzed in single junction structure, the applications to multiple junction structures are discussed and the optimal conditions reaching to a high performance are investigated.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.912-920
• /
• 2006

The purpose of this study is to present the design standard for load density in subway station. From the data of electric equipment capacity and electric power consumption for 43 subway stations, current levels of the load density and excess capacity factor were surveyed and analyzed, In addition mean value, standard deviation, maximum value, median value and correlation coefficient were evaluated through excel program. Also it was carried out the regression analysis. The estimation method of load density and design criterion were studied. As a result, load density in this thesis have been proposed : 51.3 $[VA/m^2]$ on the general power load can be a standard value for subway station.

• 한국환경복원기술학회지
• /
• 제14권3호
• /
• pp.47-55
• /
• 2011

Cicada is a very familiar insect to people but habitat characteristics of them are not well known. To investigate habitat characteristics of cicada nymph, plant species, plant cover, soil hardness, accumulated organic mass, organic content in soil, and root density were investigated at 11 sites in an apartment complex garden in Seoul. Selected sites had different densities of cicada nymph case above the ground. Density of cicada nymph case was positively correlated with accumulated organic mass, organic content in soil, and root density and negatively correlated with soil hardness. Even though shrub coverage was not linearly correlated with the density of cicada nymph case, 80% cover of shrub was necessary for the high density of them. Data in this study suggested that organic matter in addition to root density be the primary limitation factor of cicada nymph and high amount of litter-fall decrease soil hardness through the increase of soil organic matter. This study suggests that the density of cicada nymph can be managed through organic content in soil.

• 한국정밀공학회지
• /
• 제18권12호
• /
• pp.73-81
• /
• 2001

The MIAB welding uses a rotating arc as its heat source and is known as an efficient method fur pipe butt welding. The arc is rotated around the weld line by the electro-magnetic force resulting from the interaction of arc current and magnetic field. The electro-magnetic force is affected by magnetic flux density, arc current, and arc length. Especially, the magnetic flux density is an important factor on arc rotation and weld quality. This paper presents a 2D finite element model for the analysis of magnetic flux density in the actual welding conditions. The magnetic flux density is mainly dependent on gap between two pipes, the position of coil from gap center, exciting current, and relative permeability. Thus, the relations between magnetic flux density and main factors were investigated through experiment and analysis. Experiments were performed for the steel pipes(48.1mm O.D and 2.0mm thickness). The analysis results of magnetic flux density reveal that it increases with increasing exciting current, increasing relative permeability, decreasing distance from gap center to coil, and decreasing gap size. It is considered that the results of this study can be used as important data on the design of coil system and MIAB welding system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.619-621
• /
• 1996

This paper presents the study on the development of the power factor correction convener with ZVT Boost converter, which is better than the conventional PWM Boost converter to increase the switching frequency for high density and lower stress of switch. A simple DC and small signal model for the power factor correction converter with constant switching frequency is derived. The guide line for design of controller is summarized.

• 한국콘텐츠학회논문지
• /
• 제11권11호
• /
• pp.79-90
• /
• 2011

e-Book의 인터페이스 설계는 인쇄 텍스트를 읽고 이해하는 과정에서 시각적 경험에 의해 획득되는 물리적 요인을 반영할 필요가 있다. 이에 본 연구에서는 e-Book 인터페이스 설계를 위한 디지털 텍스트 구조의 물리적 요인은 무엇인지를 규명하고, 이를 반영한 프로토타입의 e-Book 인터페이스를 개발해 봄으로써 그 가능성을 확보하고자 하였다. 디지털 텍스트 구조의 물리적 요인을 규명하기 위하여 탐색적 요인분석과 확인적 요인분석이 실시되었으며, 이를 위해 237명의 대학생들이 설문조사에 참여하였다. 연구결과, 디지털 텍스트 구조의 물리적 요인에 대한 29개의 문항이 개발되었으며 신뢰도는 0.91이었다. 탐색적 요인분석 결과, 부피(volume), 깊이(depth), 밀도(density), 공간(space), 배열(layout), 형태 (format), 단서(signal), 크기(size), 그리고 길이(length) 등 9개의 요인이 도출되었으며, 설명량은 71.49%였다. 9개 요인의 구조에 대한 확인적 요인분석 결과, 각 요인의 적재량은 p<.01 수준에서 유의미한 것으로 나타났으며, 전체적인 모형 적합지수도 양호한 것으로 나타났다. 마지막으로 연구결과의 논의와 추후연구를 위한 시사점이 제시되었다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권3호
• /
• pp.209-215
• /
• 2006

Preoperative neoadjuvant chemotherapy using cisplatin and 5-FU is generally given in oral and maxillofacial cancer. At tissue level both inflammation and fibrosis occur after chemotherapy. The cellular changes mimic those of a granulating wound, with activated macrophages and fibroblasts replacing the malignant cells as they are erradicated. Stromal cells, together with extracellular matrix components, provide the microenvironment that is pivotal for tumor cell growth, invasion, and metastatic progression. Vascular endothelial growth factor(VEGF), an important regulator of angiogenesis in cancer, induces mitogenesis of vascular endothelial cells, and vascular permeabilization and microvessel formation in a tumor are associated with tumor nutrition and oxygenation. Also, they are associated with chemotherapeutic drug delivery. Oxygen delivery to tumor appears to rely on a network of microvessels, On the other hand, the tumor microvessel is clearly an important factor in chemotherapeutic drug delivery to cancer cells, and the efficacy of drug delivery can be high in richly vascularized tumors. So, this study was conducted to evaluate the effect of neoadjuvant chemotherapy on microvessel density from 11 patients with tongue cancers. Our results showed that neoadjuvant chemotherapy was seemed to decrease VEGF expression in tumor cells, however, it did not significantly alter VEGF expression in tumor-associated macrophages. Also, Neoadjuvant chemotherapy had little effect on the microvessel density using CD34, and tumor-associated macrophage level using CD68. Thus, tumorassociated macrophages seem to be the key factor associated with the maintenance of microvessel density after neoadjuvant chemotherapy in tongue cancer.