• The Journal of the Korea Contents Association
• /
• v.15 no.3
• /
• pp.168-173
• /
• 2015

Use of forearm and hip joint bone density scan and find the clinical usefulness of the results that can be inferred as a result of any other region sites injured by a correction factor which if One part up. Groups of 60 patients, 10 patients by age 20-70 were composed of patients measured with the forearm and lumbar spine bone mineral density T-score and Z-score of the survey for each of the three factors that it was Find the correction factor to obtain the relationship. Bone mineral density of the correlation coefficient R = 0.8 correction factor is Y = 1.341X + 0.146. T-score of correlation coefficient R = 0.804 and the correction factor Y = 0.565X - 0.327 is Z-score of the correlation coefficient R = 0.637 correction factor Y = 0.539X - 0.225. It is regarded that there will be a clinical availability which can analogize the result of a part by using the result of the other part. It will be able to determine an auxiliary role in the clinical diagnosis. Correction factor to the equation Y = 1.341X + 0.146 is recommended.

• Nuclear Engineering and Technology
• /
• v.18 no.2
• /
• pp.78-84
• /
• 1986

An equation of material number density sensitivity coefficient is derived using first-order perturbation theory. The beginning of cycle of Super-Phenix I is taken as the reference system for this study. Effective multiplication factor of the reference system is defined as system response function and fuel enrichment and fuel effective density are chosen for the variation of reference input data since they are described by material number density which is a component of Boltzmann operator. The nuclear computational code system (KAERI-26 group cross section library/1DX/2DB/PERT-V) is employed for this calculation. Sensitivity coefficient of fuel enrichment on effective multiplication factor is 4.576 and sensitivity coefficient of effective fuel density on effective multiplication factor is 0.0756. This work shows that sensitivity methodology is lesser timeconsuming and gives more informations on important design parameters in comparison with the direct iterative calulation through large computer codes.

• Journal of the Korean Geosynthetics Society
• /
• v.19 no.4
• /
• pp.33-40
• /
• 2020

It is now common to find the wastes buried in the past during the excavation process of soil for large scale housing and land development. Without proper treatment of the wastes environmentally, the excavation process is no longer able to proceed, and an action plan should be provided to treat the wastes with environmental and economic viability. In the study, the relationship between the apparent density of the wastes and the volume conversion factor, which is the basis in the estimation of waste treatment cost was investigated. From 10 sampling points of a landfill site, wastes were sampled, analyzed for physical characteristics, and the apparent density of mixed and sorted waste was assessed. Applying the empirical formula, and the formula we suggested here, the volume conversion factors were compared with that measured directly in the field using dump truck and excavator. Obviously there was a close relationship among the volume conversion factors resulting from the empirical formula, the formula we suggested and that measured in the field.

• Wind and Structures
• /
• v.37 no.3
• /
• pp.211-227
• /
• 2023

To investigate the non-Gaussian feature of fluctuating wind pressures on rectangular high-rise buildings, wind tunnel tests were conducted on scale models with side ratios ranging from 1/9~9 in an open exposure for various wind directions. The high-order statistical moments, time histories, probability density distributions, and peak factors of pressure fluctuations are analyzed. The mixed normal-Weibull distribution, Gumbel-Weibull distribution, and lognormal-Weibull distribution are adopted to fit the probability density distribution of different non-Gaussian wind pressures. Zones of Gaussian and non-Gaussian are classified for rectangular buildings with various side ratios. The results indicate that on the side wall, the non-Gaussian wind pressures are related to the distance from the leading edge. Apart from the non-Gaussianity in the separated flow regions noted by some literature, wind pressures behind the area where reattachment happens present non-Gaussian nature as well. There is a new probability density distribution type of non-Gaussian wind pressure which has both long positive and negative tail found behind the reattachment regions. The correlation coefficient of wind pressures is proved to reflect the non-Gaussianity and a new method to estimate the mean reattachment length of rectangular high-rise building side wall is proposed by evaluating the correlation coefficient. For rectangular high-rise buildings, the mean reattachment length calculated by the correlation coefficient method along the height changes in a parabolic shape. Distributions of Gaussian and non-Gaussian wind pressures vary with side ratios. It is inappropriate to estimate the extreme loads of wind pressures using a fixed peak factor. The trend of the peak factor with side ratios on different walls is given.

• Journal of Oral Medicine and Pain
• /
• v.45 no.4
• /
• pp.83-88
• /
• 2020

Purpose: Growth differentiation factor 11 (GDF11) and myostatin (MSTN) are closely-related transforming growth factor β family members reported to play crucial roles in bone formation. We previously reported that, in contrast to MSTN, GDF11 promotes osteogenesis of vertebrae and limbs. GDF11 has been also reported as an important regulator in tooth development by inducing differentiation of pulp stem cells into odontoblasts for reparative dentin formation. The goal of this study was to investigate the differential roles of GDF11 and MSTN in dental and cranial bone formation. Methods: Micro-computed tomography analysis was performed on cranial bones, including frontal, parietal, and interparietal bones, and lower incisors of wild-type, Gdf11 knockout (Gdf11-/-), and Mstn knockout (Mstn-/-) mice. Tissue volume, thickness, and mineral density were evaluated for both cranial bone and lower incisors. Lower incisor lengths were also measured. Because Gdf11-/- mice die shortly after birth, analysis was performed on newborn (P0) mice. Results: Compared to those of Mstn-/- mice, cranial bone volume, thickness, and mineral density levels were all significantly diminished in Gdf11-/- mice. Tissue mineral density of Gdf11-/- mice were also significantly decreased compared to wild-type mice. Likewise, lower incisor length, tissue volume, thickness, and mineral density levels were all significantly reduced in Gdf11-/- mice compared to Mstn-/- mice. Incisor length was also significantly decreased in Gdf11-/- mice compared to wild-type mice. Mstn-/- mice exhibited mildly increased levels of tissue volume, thickness, and density in cranial bone and lower incisor compared to wild-type mice although statistically not significant. Conclusions: Our findings suggest that GDF11, unlike MSTN, endogenously promotes cranial bone and tooth development.

• Current Photovoltaic Research
• /
• v.9 no.1
• /
• pp.6-10
• /
• 2021

The mesh mask screen, which is generally used for screen printing metallization of silicon solar cell, requires high squeegee pressure and low printing speed. These requirements are acting as a limiting factor in production yield in photovoltaic industries. In order to improve the productivity, a metal mask, which has high durability and high printing speed, has been researched. In this paper, the characteristics of each solar cell, in which electrodes were formed by using a metal mask and a mesh mask, were analyzed through recombination current density. In particular, the metal-induced recombination current density (Jom) representing the recombination of the emitter-metal interface was calculated using the shading method, and the resulting efficiency and open-circuit voltage were analyzed through the diode equation. As a result of analyzing the proportion of the metal-induced recombination current density to the total emitter recombination current density, it was analyzed that the reduction of the metal-induced recombination current density through the metal mask is an important factor in reducing the total recombination current density of the solar cell.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.10 no.1
• /
• pp.1-9
• /
• 1990

Tillering of orchardgrass during establishment year was considered as an important factor for ground cover and forage yield. Field experiment was conducted to examine seasonal fluctuation of tiller number in three cultivars of orchardgrass; Potomac, Hall-mark, and Sumas, after transplanting with five planting density. Also, effects of plant density and nitrogen application in cultivar, Potomac were studied on tillering, forage yield and various growth characteristics in pot experiment Tillers per plant decreased with increased density and showed seasonal variations. It increased up to July, decreased during summer months, and increased again from October. Sumas had less tillers than other cultivars, especially at high density. Tillers per unit area kept high during spring. After then, there was stady decrease through summer and remained constant without affecting by planting density. Nitrogen application increased tillers per unit area in Potomac up to 20kg/10a, but decreased its tiller production at 40kg/lOa. Maximum number of tiller was obtained in the combinations of 20kg application of nitrogen with higher density than 324 plant per square meter. Forage yield increased as nitrogen application increased, while it did not respond to plant density. Forage yield had high linear correlation between LAI, leaf number with a peak at 2800 culrns. For high forage yielding, it was suggested to obtain optimum number of tillers per unit area in early season as possible, applying of adequate amount of nitrogen with relative high density depend on cultural condition.

• Research in Community and Public Health Nursing
• /
• v.14 no.2
• /
• pp.253-262
• /
• 2003

Purpose: This study was carried out to identify factors influencing osteoporosis in women at pre- and post-menopausal state. Methods: The subjects of this study were 52 pre-menopausal and 125 post-menopausal women who were assessed of bone density in one general hospital. The data were collected through review of clinical records and telephone interviews using a questionnaire. Results: In the pre-menopausal women, the factors influencing osteoporosis were regular exercise (protective factor) and age (risk factor). Regression analysis showed that the factors attributable to osteoporosis included educational level, weight, age and number of pregnancy, accounted for 41.89% of the total variance. In the post-menopausal women. the factors influencing osteoporosis were age (risk factor), low educational level (risk factor), low economical state (risk factor), high parity (risk factor), and intake of coffee (protective factor). Regression analysis also showed that factors attributable to their osteoporosis included age, educational level, number of delivery, intake of the coffee, regular exercise, number of pregnancy and duration of oral pill intake, accounted for 37.41 % of the total variance. Conclusion: In pre-menopausal women, regular exercise was one of the most powerful determinant of their bone mass. Therefore, it is necessary to participate in a regular exercise program to maintain peak bone mass density prior to the onset of menopause. In post-menopausal women, increased age was the most influencing factor of their bone mass. Therefore, it is essential to establish early diagnosis and management of osteoporosis after menopause.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.5
• /
• pp.379-382
• /
• 2010

In this study, in order to develop the lead-free piezoelectric ceramics with high piezoelectric and dielectric properties, $(K_{0.5}Na_{0.5})(Nb_{0.97}Sb_{0.03})O_3$ ceramics were fabricated using a conventional mixed oxide process and their piezoelectric and dielectric characteristics were investigated according to the $K_{5.4}Cu_{1.3}Ta_{10}O_{29}$ addition. $K_{5.4}Cu_{1.3}Ta_{10}O_{29}$ addition enhanced density, electromechanical coupling factor($k_p$) piezoelectric constant $d_{33}$ and mechanical quality factor($Q_m$). At the 0.9 mol% $K_{5.4}Cu_{1.3}Ta_{10}O_{29}$ addition, density, electromechanical coupling factor($k_p$), dielectric constant(${\varepsilon}_r$) and piezoelectric constant($d_{33}$) of specimen showed the optimum values of 0.46, 471, and 148 pC/N, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.175-176
• /
• 2008

In this study, in order to develop the composition ceramics for lead-free ultrasonic motor, $[(K_{0.5}Na_{0.5})_{0.95}Li_{0.05}(Nb_{0.96}Sb_{0.04})]O_3$ ceramics were fabricated using $Ag_2O$ as sintering aid and a conventional mixed oxide process and their piezoelectric and dielectric characteristics were investigated according to the $SrTiO_3$ substitution. $SrTiO_3$ substitution enhanced density, dielectric constant$(\varepsilon_r)$ and electromechanical coupling factor$(k_p)$. However, mechanical quality factor was deteriorated. At the 0.5mol% $SrTiO_3$ substitution, density, electromechanical coupling factor$(k_p)$, dielectric constant$(\varepsilon_r)$ and piezoelectric constant$(d_{33})$ of specimen showed the optimum value of 4.437g/$cm^3$, 0.457, 1294, 265pC/N, respectively.