• 대한원격탐사학회지
• /
• 제30권5호
• /
• pp.651-664
• /
• 2014

최근 주기적이고 정확한 산림바이오매스 탄소저장량 추정에 대한 필요성이 한국에서도 점차 증가하고 있다. 본 연구에서는 k-Nearest Neighbor (kNN) 및 Regression Tree Analysis (RTA) 알고리즘을 대상으로 공주 및 세종시를 대상으로 한 탄소량 변화 탐지를 통해 그 효용성을 비교 분석 하고자 하였다. 현장 자료로는 제 3차 및 제 5, 6차 국가산림자원조사 자료를 이용하였으며, 위성영상자료는 1992년, 2010년에 취득된 Landsat TM과 2009년에 취득된 Aster 영상을 이용하였다. 또한, 추정정확도를 향상시키기 위해 각 영상으로부터 다양한 식생지수를 생성하였다. 두 방법론의 비교를 위해 RMSE 및 평균편의(mean bias)를 포함한 각종 탄소통계량을 계산하였으며, 대상지역에 대한 탄소분포지도를 생성하고 비교를 수행하였다. 그 결과, kNN 알고리즘은 영상에 상관없이 보다 안정적인 추정결과를 나타낸 반면, 스무딩 효과로 인해 탄소의 공간분포가 뚜렷하지 않은 단점이 발견되었다. RTA의 경우 평균편의 결과 및 탄소의 공간분포가 명확히 나타나는 장점이 있으나, 위성영상에 따라 탄소추정량에서 큰 차이를 나타내었다. 최종적으로 2009년 및 2010년 탄소지도에서 1992년 탄소지도를 차분한 탄소차분지도를 생성을 통해 공주시 및 세종시 지역의 산림 탄소저장량이 급격히 증가했음을 확인하였다.

• 대한토목학회논문집
• /
• 제39권6호
• /
• pp.691-702
• /
• 2019

홍수범람지도는 홍수에 대비하여 도시계획이나 댐 수위 조절 운영, 제방 등의 설계에 주요 지표로 사용되며 거주지역에 대한 홍수 발생 여부를 예보하거나 홍수 발생 시 신속하고 안전하게 대피하도록 하는 홍수 예·경보시스템 구축 등에도 중요한 역할을 한다. 국가하천과 같이 중요도 혹은 홍수 취약성이 높은 하천주변 지역의 경우, 고정밀도 LiDAR 기반 DEM 기반 정확도가 높은 홍수지도 작성에 2차원 혹은 3차원의 전문화된 범람지도 가시화 수치모형이 비용과 상관없이 활용될 수 있으나 지방하천 및 소하천은 예산상 한계 및 적합한 기술부족으로 여전히 시간소모적인 수작업이나 부정확하거나 비효율적인 기존 홍수지도작성 기법을 감수해왔다. 본 연구에서는, 실무에서 하천기본계획 수립 시 활용되는 HEC-RAS 기반 1차원 홍수위 모형 결과와 DEM을 기반으로 홍수지도작성의 복잡한 단계를 자동화시키고, 오픈소스인 QGIS와 연계할 수 있어 고비용의 ArcGIS에 기반하지 않는 OpenGIS 기반 홍수범람지도 생성 자동화 소프트웨어(Open Flood Mapper, OFM)를 개발하였다. OFM은 지난 2007년도 태풍 나리 내습 시 범람피해를 입은 제주도 한천 하류 침수흔적도, 첨두홍수위에 기반한 HEC-GeoRAS 및 수작업을 통해 제작한 홍수 범람지도와 비교하여 검증하였고, 빈도별 홍수범람지도를 추적하여 극한 홍수사상에서 범람의 특성을 시범적으로 구현하고 분석하였다.

• 천문학회보
• /
• 제40권2호
• /
• pp.42.2-43
• /
• 2015

Massive stars play a major role in the interstellar energy budget and the shaping of the galactic environment. The water molecule is thought to be a sensitive tracer of physical conditions and dynamics in star-forming regions because of its large abundance variations between hot and cold regions. Herschel/HIFI allows us to observe the multiple rotational transitions of H2O including the ground-state levels, and its isotopologues toward high-mass star-forming regions in different evolutionary stages. Photodissociation regions (PDRs) are also targeted to investigate the distribution of water and its chemistry. We present line profiles and maps of H2O using data from two guaranteed-time key programs "Water In Star-forming regions with Herschel" and "Herschel observations of EXtra-Ordinary Sources". We analyze the temperature and density structures using LTE and non-LTE methods. We also estimate turbulent and expansion velocities, and abundance of water in the inner and outer envelopes using the 1D radiative transfer code. Around high-mass protostars we find H2O abundances of ~10-8-10-9 for the outer envelope and ~10-4-10-5 for the inner envelope, and expansion and turbulent velocities range from 1.0 km s-1 to 2.0 km s-1. The abundances and kinematic parameters of the sources do not show clear trends with evolutionary indicators. The Herschel/HIFI mapping observations of H2O toward the Orion Bar PDR show that H2O emission peaks between the shielded dense gas and the radicals position, in agreement with the theoretical and the observational PDR structure. The derived H2O abundance is ~10-7 and peaks at the depth of AV ~8 mag from the ionization front. Together with the low ortho-to-para ratio of H2O (~1) presented by Choi et al. (2014), our results show that the chemistry of water in the Orion Bar is dominated by photodesorption and photodissociation.

• 천문학회보
• /
• 제38권2호
• /
• pp.34.1-34.1
• /
• 2013

Interstellar ices (e.g., $H_2O$, $CO_2$, and CO ices) are formed on the surface of dust grains in dense molecular clouds. In a near-infrared spectrum, we can observe deep absorption features particularly due to $H_2O$ ice at $3.05{\mu}m$ and $CO_2$ ice at $4.27{\mu}m$. These interstellar ices have many pieces of information on the interstellar environment. Among various ices, $CO_2$ ice is one of the most important ones as a probe of the interstellar environment. That is because $CO_2$ ice is a secondary product unlike $H_2O$ and CO ices which are primarily formed on dust grains. Past studies for $CO_2$ ice in nearby galaxies were performed only for the galactic center in a few galaxies. In order to utilize the information from $CO_2$ ice effectively, it is valuable to perform mapping observations of ices on a galactic scale. With AKARI, we obtain the spatially-resolved near-infrared ($2.5-5.0{\mu}m$) spectra for the central ~1 kpc region of the nearby starburst galaxy M 82. These spectra clearly show the absorption features due to interstellar $H_2O$ and $CO_2$ ices, and we created their column density maps. As a result, we find that the spatial distribution of $H_2O$ ice is significantly different from that of $CO_2$ ice; $H_2O$ ice is widely distributed, while $CO_2$ ice is concentrated near the galactic center. Our result for the first time reveals spatial variations in $CO_2/H_2O$ ice abundance ratio on a galactic scale, suggesting that the ice-forming interstellar environment changes within a galaxy. In this presentation, we discuss the cause of the variations in the ice abundance ratio.

• 한국수소및신에너지학회논문집
• /
• 제21권4호
• /
• pp.271-277
• /
• 2010

$(Ba(Zr_{0.85}Y_{0.15})O_{3-\delta})$ oxide, showing high protonic conductivity at high temperatures and good chemical stability with $CO_2$ are referred to as hydrogen separation membrane. For high efficiency of hydrogen separation ($H_2$ flux and selectivity) and low fabrication cost, ultimate thin and dense BZY-Ni layer has to be coated on a porous substrate such as $ZrO_2$. Aerosol depostion (AD) process is a novel technique to grow ceramic film with high density and nano-crystal structure at room-temperature, and may be applicable to the fabrication process of AD integration ceramic layer effectively. XRD, SEM, X-ray mapping measurements were conducted in order to analyze the characteristics of BZY-Ni membrane fabricated by AD process. it is observed that it is homogeneous distribution for BZY-Ni. The result of $H_2$ permeation rate suggests that BZY-Ni composite is higher than BZY.

• 한국측량학회지
• /
• 제15권1호
• /
• pp.1-7
• /
• 1997

LIS/GIS의 D/B구축을 위한 수치지도에서의 위치정보는 지물의 위치판독뿐만 아니라 이를 이용한 LIS/GIS의 구조화나 시설물 관리, 도시관리, 지적관리, 공간분석 등에서 중요한 자료로 이용되고 있다. 본 연구에서는 수치지도에서 평면위치자료의 오차분석을 위하여 지형별 특성에 따라 지형, 밀도, 경사도의 세가지 형태로 분류하고, 지형도의 평면위치를 참값으로 하여 수치지도와의 상대적 오차를 분석하였다 수치실험결과, X, Y 방향에 관계없이 면 구조의 데이터보다 선구조의 데이터에 대하여 과대오차가 더 많이 발생함을 알 수 있었으며, 지형별 분석의 경우에 있어서는 교외지와 산악지에서의 평균오차가 작게 나타났다. 밀도별 분석에 있어서는 느슨한 밀도를 기준으로 중간밀도와 조밀한 밀도에서의 평균오차가 작게 나타나고, 경사도별 분석에 있어서는 평지를 기준으로 급경사지와 완경사지에서의 평균오차가 작게 나타남을 알 수 있었다.

• Ocean and Polar Research
• /
• 제28권3호
• /
• pp.225-236
• /
• 2006

Seagrass meadows are considered as critical habitats for a wide variety of marine organisms in coastal and estuarine ecosystems. In many cases, studies on the spatial/temporal distribution of seagrass have depended on direct observations using SCUBA diving. As an alternative method fur studying seagrass distribution, an application of hydroacoustic technique has been assessed for mapping seagrass distribution in Dongdae Bay, on the south coast of Korea, in September 2005. Data were collected using high frequency transducer (420 kHz split-beam), which was installed with towed body system. The system was linked to DGPS to make goo-referenced data. Additionally, in situ seagrass distribution has been observed using underwater cameras and SCUBA diving at four stations in order to compare with acoustic data. Acoustic survey was conducted along 23 transects with 3-4 blot ship speed. Seagrass beds were vertically limited to depths less than 3.5m and seagrass height ranged between 55 and 90cm at the study sites. Dense seagmss beds were mainly found at the entrance of the bay and at a flat area around the center of the bay. Although the study area was a relatively small, the vertical and spatial distributions of the seagrass were highly variable with bathymetry and region. Considering dominant species, Zostera marina L., preliminary estimation of seagrass biomass with acoustic and direct sampling data was approximately $56.55g/m^2$, and total biomass of 104 tones (coefficient variation: 25.77%) was estimated at the study area. Hydroacoustic method provided valuable information to understand distribution pattern and to estimate seagrass biomass.

• Korean Journal of Geomatics
• /
• 제5권1호
• /
• pp.7-19
• /
• 2005

Photogrammetric mapping procedures have gone through major developments due to significant improvements in its underlying technologies. The availability of GPS/INS systems greatly assist in direct geo-referencing of the acquired imagery. Still, photogrammetric datasets taken without the aid of positioning and navigation systems need control information for the purpose of surface reconstruction. Point features were, and still are, the primary source of control for the photogrammetric triangulation although other higher-order features are available and can be used. LIDAR systems supply dense geometric surface information in the form of three dimensional coordinates with respect to certain reference system. Considering the accuracy improvement of LIDAR systems in the recent years, LIDAR data is considered a viable supply of photogrammetric control. To exploit LIDAR data, new challenges are poised concerning the representation and reference system by which both the photogrammetric and LIDAR datasets are described. In this paper, registration methodologies will be devised for the purpose of integrating the LIDAR data into the photogrammetric triangulation. Such registration methodologies have to deal with three issues: registration primitives, transformation parameters, and similarity measures. Two methodologies will be introduced that utilize straight-line and areal features derived from both datasets as the registration primitives. The first methodology directly incorporates the LIDAR lines as control information in the photogrammetric triangulation, while in the second methodology, LIDAR patches are used to produce and align the photogrammetric model. Also, camera self-calibration experiments were conducted on simulated and real data to test the feasibility of using LIDAR patches for this purpose.

• 지질공학
• /
• 제24권1호
• /
• pp.123-135
• /
• 2014

지진은 인적, 물적으로 많은 피해를 야기시키기 때문에 지진피해를 저감하기 위해서 활성단층에 대한 연구가 최근 매우 다양한 방법으로 진행되고 있다. 이러한 연구를 위해서는 활성단층의 존재를 밝히는 것이 우선되어야 하는데 기존 연구에서는 주로 항공사진, 위성사진 그리고 낮은 해상도의 DEM 등을 이용하여 선형구조를 분석하여 주로 연구를 수행하였다. 하지만 단층의 활성도가 상대적으로 낮은 한국의 지체구조 및 지형특성과 수목이 많은 단점으로 인해 기존의 연구 방법은 많은 한계를 가지고 있었다. 이번 논문에서는 이러한 한계를 극복하기 위해 최근 세계적으로 많은 주목을 받고 있는 원격탐사 방법인 LiDAR 기법에 대해 소개하고 자료 사용법에 대해 간략히 소개하고자 한다. 특히 이 논문에서는 아직 국내에서는 보편화되지 않은 항공 LiDAR 기법을 이용한 연구방법에 대한 최근의 이해를 간략히 소개하고, 국내외의 자료를 통해 지질학에 어떻게 이 기법을 적용할 수 있을지에 대해 소개하고 더 나은 방안을 모색해 보고자 하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.817-819
• /
• 2003

Land degradation is a crucial issue in mountainous areas and is manifested in a variety of processes. For its assessment, application of existing models is not straightforward. In addition, data availability might be a problem. In this paper, a procedure for land degradation assessment is described, which follows a four-step approach: (1) detection, inventory and mapping of land degradation features, (2) assessing the magnitude of soil loss, (3) study of causal factors, and (4) hazard assessment by applying decision trees. This approach is applied to a case study in the Middle Mountain region of Nepal. The study shows that individual mass movement features such as debris slides and slumps can be easily mapped by photo interpretation techniques. Application of soil loss estimation models helps get insight on the magnitude of soil losses. In the study area soil losses are higher in rainfed crops on sloping terraces (highest soil loss is 32 tons/ha/yr) and minimal under dense forest and in irrigated rice fields (less than 1 ton/ha/yr). However there is high frequency of slope failures in the form of slumps in the rice fields. Debris slides are more common on south-facing slopes under rainfed agriculture or in degraded forest. Field evidences and analysis of causal factors for land degradation helps in building decision trees, the use of which for modelling land degradation has the advantage that attributes can be ranked and tested according to their importance. In addition, decision trees are simple to construct, easy to implement and very flexible in adaptations.