• Journal of the Korean Institute of Gas
• /
• v.26 no.4
• /
• pp.9-17
• /
• 2022

This paper is the continuation of our previous paper, which we refer to as numerical analysis of phase behavior and flow properties in an injection tubing during gas phase CO₂ injection. Our study in this paper show the results during supercritcal CO₂ injection under the same project. Geological CO₂ storage technology is one of the most effective method to decrease climate change due to high injectivity and storage capacity and economics. A demonstration-scale CO₂ storage project was performed in a deep aquifer in the Pohang basin, Korea for a technological development in a large-scale CO₂ storage project. A problem to consider in the early stage design of the project was to analyze CO₂ phase change and flow characteristics during CO₂ injection. To solve this problem, injection conditions were decided by calculating injection rate, pressure, temperature, and thermodynamic properties. For this research, we simulated and numerically analyzed CO₂ phase change from liquid to supercritical phase and flow characteristics in injection tubing using OLGA program. Our results provide discharge pressure and temperature conditions of CO₂ injection combined with a pressure of an aquifer.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.684-687
• /
• 2005

KIER has been running a demonstration project for 10kWe solar thermal power generation. the project is to build and operate the first solar thermal power generation system in Korea. For concentrating solar thermal energy $40m^2$ dish type concentrator was adapted and a stirling engine is going to be integrated to the system for power production. At the moment building the dish concentrator including mirror and sun tracking system was completed and it's performance are being closely evaluated. This paper will introduce some detailed designs and construction procedures which we have experienced so far.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.78.2-78.2
• /
• 2011

To achieve the required higher efficiency and lower emission performance, Korea's 300 MW IGCC RDD&D (Research Development, Demonstration and Dissemination) project was launched in December 2006 under the leadership of the Korea Electric Power Corporation (KEPCO), with the support of the Korea Ministry of Knowledge Economy. Our research group, KEPCO Research Institute had set-up the a coal gasifier for the pilot test and conducted many experiments for parametric study in this project. Our group focused visualization of pulverized coal injection pattern in the gasifier. Through this study we found that two types of coal burners having different oxygen supply angles can be a source changing gasification condition like temperature.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.180-183
• /
• 2006

As a final step for developing a small-scale solar thermal power generation technology, a demonstration project for a dish-stirling power system has been carried out by KIER. During the two years project period, 10kW solar-only power system was built in Jinhae city and successful solar operations were demonstrated. In this paper an example of typical clean day operation and analysis results was introduced.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.206-212
• /
• 2004

This paper is application of System Assurance(SA) for the rolling stock. As railway systems become more complex, design teams are increasingly under pressure to deliver, design solutions, which integrate both technical and Systems Assurance(SA). Systems Assurance is the application of management methods and analysis techniques to ensure that a design meets Reliability, Availability, Maintainability and Safety (RAMS) criteria. It should be clearly understood that the intent of System Assurance is not just to provide analytical techniques as a metric on performance, but more importantly it should provide a management tool with which to co-ordinate and assure the whole design. System Assurance encompasses the ongoing requirement to consider safety, and RAM through each stage of a Project, from feasibility study through to commissioning and operation. If System Assurance is undertaken properly at feasibility study at the design stages of a Project, the benefits of such analyses can be significant in identifying potential problems early enough for action to be taken before manufacture or installation. At commissioning, RAMS demonstration activities are undertaken to validate the predictive and analytical techniques undertaken during the design.

• World Technopolis Review
• /
• v.4 no.3
• /
• pp.126-131
• /
• 2015

WTR articles to date have addressed raising innovation capacity in lagging regions. We now move to the question of sharing the benefits of specific innovations, noting that one way to do this is to focus on a particular technology as a demonstration project within a capacity-building project. The word "sharing" implies mechanisms that go beyond simple buy-sell transactions. This paper catalogs a number of these mechanisms, which in fact include many well-known technology transfer techniques. The paper focuses in particular on two mechanisms, technology assessment and new institutions, the latter including three Korean institutions. A manager seeking to benefit from the several mechanisms currently must find them in as many different places. We therefore present the possible "roll-up" of sharing mechanisms as an opportunity in social entrepreneurship. We hope the paper will lead to an expanded list of sharing mechanisms, consideration of their feasibility in different regions, and ultimately a one-stop shop for managers seeking to benefit their own and other organizations by the sharing of innovations.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1506-1509
• /
• 2000

The Korean National Photovoltaic Project was initiated in October 1989 to develop technologies for the generation of economically competitive electric power by photovoltaic systems. It consists of four stages through the year 2006 with technical goals and cost targets related with solar cells, balance of systems and system application. The objectives of the project are to utilize photovoltaic technology, to transfer developed technology to industries and end users by research activities and to diffuse photovoltaic systems by demonstration projects. This paper reviews long-term plan abd status of technology R&D, and markets of photovoltaics. Some activities designed to promote collaboration with foreign countries are also introduced.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.235-242
• /
• 2008

An innovative Panel ExTension SATellite(PETSAT) and propulsion system for PETSAT, are presented in this paper. First, we outline what PETSAT is. Next, based on PETSAT ethos, design policy of the propulsion system is provided. According to the policy, we designed propulsion system and concretely estimated and assembled mono-propellant and bi-propellant systems, and it indicated that mono-propellant propulsion with 50-60 seconds of specific impulse and 1 N of thrust is probable. In the case of bi-propellant, 120-150 seconds of specific impulse is valid even based on the design policy. We conducted captive tests of mono-propellant and bi-propellant propulsions with a breadboard model of propulsion system for PETSAT, and obtained good operations and performances. Based on the test results, we designed and manufactured flight model propulsion system for PETSAT. We are planning to demonstrate it in SOHLA-2L project progressed by the Space Oriented Higashiosaka Leading Association(SOHLA). SOHLA-2L will be the first on-orbit demonstrator of PETSAT in 2008.

• Journal of Platform Technology
• /
• v.6 no.4
• /
• pp.3-10
• /
• 2018

A projection-based active information display system was proposed. The proposed system is based on Intelligent Space and a steerable projector mounted mobile robot which is called Ubiquitous Display (UD). In order to transfer visual information for a human in the Intelligent Space, the UD projects a certain shape of an image with a fixed size. Due to redundancy of degree of freedom (DOF), there are lots of situations to project a same shape and size of the image on a surface. In this paper, we describe a method to determine a goal posture of the UD. Here, the goal posture is the most efficient position and orientation of the UD so as to project visual information and it is determined by the Intelligent Space. To verify the proposed method, simulation and demonstration are carried out.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.331-331
• /
• 2022

This research aims to developing new commercialization project of convergence agricultural industrial model. First, we established an inventory for the planning of convergence agricultural industrial model categorize the relevant factors identified, and then suggested three models which are the business profit model for convergence agriculture industrialization, the resource recycling complex and agricultural tourism model, and the smart agricultural model. Second, in order to investigate the feasibility of each industrial model, we investigated the willingness to participate in the project according to the pilot models such as related organizations and management agencies, and proposed the result of business feasibility analysis. Finally, we suggested the establishment of a demonstration complex through the systemization of element technologies at two models. The related systems and technologies was reviewed as a new commercialization plan through the modeling of convergence agricultural industrial types in main crop production complex presented, and set up mid- to long-term development direction. The results of this study can be applied to the design of convergence agricultural industrial model in main crop production complex.