• 자원환경지질
• /
• 제26권4호
• /
• pp.507-518
• /
• 1993

Paleomagnetic investigations have been carried out on the Tertiary sedimentary formations (Yeonil Group) in Pohang basin, southeastern Korea. A total of 215 samples were collected from 26 sites. Progressive thermal demagnetization indicates that many samples have unstable magnetization and do not reveal a characteristic direction. However, some samples from the lower and upper Duho Formation show a characteristic direction $D/I=7.8^{\circ}/48.3^{\circ}$ (${\alpha}_{95}=3.7^{\circ}$, k=174.1). Stepwise thermal demagnetization data show that some samples from the Hagjeon and middle Duho Formations reveal great-circle distributions moving from the present to a reversed direction of geomagnetic field. The mean of intersection points of the great-circles is nearly antipodal to the characteristic normal direction of the lower and upper Duho Formation. We infer that the Hagjeon Formation was formed during the reversed polarity chron C5B (16.2~14.7 Ma) and the Duho Formation 14.7~11.6 Ma based on our results and previous paleontologic and age dating data. Paleomagnetic direction for the Middle Miocene of Korea, analysed from the combined results of stable endpoints and great circles, is $D/I=8.7^{\circ}/53.9^{\circ}$ (${\alpha}_{95}=4.2^{\circ}$, k=74.8), and the corresponding paleopole is Lat./Long.=$82.7^{\circ}/230.2^{\circ}$ (${\delta}p=2.8^{\circ}$, ${\delta}m=5.9^{\circ}$). On the basis of this, we interpret that the opening of the East sea (Japan sea) or the synchronous clockwise rotation of the Southwest Japan exerted no structural influence on the Yeonil Group in the Middle Miocene.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.1109-1112
• /
• 2015

소자장치가 없는 함정의 경우 탈자 시에 지구자계와 반대방향으로 수직자화를 부여하여 수중에서 수직방향의 자계가 발생하지 않도록 한다. 탈자 시에 수직자화를 부여하는 탈자방법으로는 Flash D가 있어나 수직자화의 예측이 어렵다. 본 논문에서는 Flash D와는 달리 바이어스 자계를 인가하여 수직방향으로 자화를 형성하는 것에 대해 검토하였다. 이용된 시편은 두께 0.15mm의 아연도금 강판을 이용하여 함정의 선수에서 선미까지의 형상을 고려하여 원형, 삼각, 사각형의 형태를 가진다. FEM해석을 통해 시편형상에 따른 자계신호의 차이를 구하였고 인가자계에 의한 잔류자화특성곡선을 실험을 통해 구하였다. 바이어스자계를 수평 및 수직으로 각각 인가하여 잔류자화에 의한 자계신호를 측정하였다. 시편에 인가하는 자계는 파형발생기를 이용하여 솔레노이드 코일에 전류를 흘려 발생시켰으며 수직바이어스자계는 솔레노이드 코일 아래에 사각 코일을 설치하여 발생시켰다. 신호측정은 자계센서를 이용하였다. 이 실험을 통해 수직 및 수평 바이어스 자계는 시편에 수직 및 수평자화를 각각 형성시켰으며 수직자화는 수직바이어스 자계와 선형적인 관계를 가져 함정에 형성되는 수직자화를 예측할 수 있음을 알았다.

• 한국자기학회지
• /
• 제13권4호
• /
• pp.176-181
• /
• 2003

금속마스크에 의해 패턴된 교환결합 이중박막 NiO(10∼60 nm)/NiFe(10 nm)의 모서리에서 발생한 여러 종류의 자구벽(magnetic domain wall)을 MFM(magnetic_ force microscopy)로 측정하였다. 박막의 모서리 경계선이 교환결합이방성 방향과 같은 방향일 때는 직선모양의 Neel 자구벽이 측정되었으며, 경계면이 이방성방향과 수직인 경우에는 zigzag Bloch 자구벽이 발견되었다. 이러한 자구벽은 NiO(60 nm)인 경우에는 교환결합세기(H$_{ex}$ = 75 Oe)가 박막경계면에서 발생한 반자장(demagnetization field) 세기보다 크기 때문에 발생하지 않았고, 교환결합세기가 약한 NiO(30 nm, H$_{ex}$ = 21 Oe)를 갖는 이중박막에서는 발견되었다. 이들 자구벽이 외부 자기장의 변화에 따라 움직이는 자화반전과정을 측정하기위해 $\pm$300 Oe까지 자기장을 가하면서 MFM을 측정하였다.

• Journal of Magnetics
• /
• 제18권3호
• /
• pp.245-249
• /
• 2013

A finite element model was built for MnBi/${\alpha}$-Fe nanocomposite permanent magnets, and the demagnetization curves of the magnets were simulated by micro-magnetic calculation. The microstructure of the cubic model is composed of 64 irregular grains with an average grain size of 20 nm. With the volume fraction of soft magnetic phase (t vol. %) ranged from 5 to 20 vol. %, both isotropic and anisotropic nanocomposite magnets show typical single-phase permanent magnets behavior in their demagnetization curves, illustrating good intergranular exchange coupling effect between soft and hard magnetic phases. With the increase of volume fraction of soft magnetic phase in both isotropic and anisotropic magnets, the coercive force of the magnets decreases monotonically, while the remanence rises at first to a peak value, then decreases. The optimal values of maximum energy products of isotropic and anisotropic magnets are 84 and $200kJ/m^3$, respectively. Our simulation shows that the MnBi/${\alpha}$-Fe nanocomposite permanent magnets own excellent magnetic properties and therefore good potential for practical applications.

• Tribology and Lubricants
• /
• 제29권5호
• /
• pp.318-323
• /
• 2013

Overheating in electrical motors results in detrimental effects such as degradation of the insulation materials, demagnetization of magnets, increases in Joule losses, and decreases in motor efficiency and lifetime. Thus, it is important to find ways to dissipate heat from the motor and to keep the motor operating at its most efficient temperature. In this study, a new design to guide air flow through a given brushless direct current (BLDC) motor is developed and the design is analyzed, specifically by using computational fluid dynamics (CFD) simulations. The results showed that the temperature distribution in the three proposed models is lower than that in the original model, although the speed of the cooling fan in the original model reaches a very high value of $15{\times}10^3$ rpm. The results also showed that CFD can be effectively used to simulate the heat transfer of BLDC motors.

• Journal of Magnetics
• /
• 제19권1호
• /
• pp.43-48
• /
• 2014

Magnetic materials with large coercive force and high squareness ratio are currently developing to meet an industrial demand. Since a ferromagnetic material has hysteresis characteristics, it is hard to demagnetize a ferromagnetic material precisely. In this paper, we describe deperm processes and conduct an analysis of residual magnetization of ferromagnetic material using the Preisach modeling with a two-dimensional finite elements method (FEM). From the results, it was shown that an exponential decrement form of deperm protocol is more efficient than a linear decrement form because of the demagnetizing field in the ferromagnetic material.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.99-102
• /
• 2006

This paper proposes a DITC(Direct Instantaneous Torque Control of SRM (Switched Reluctance Motor) using a novel 4-level converter for smooth torque control and high efficiency. DITC of SRM is very useful for smooth torque control, but the driving efficiency is low due to advanced current that does not produce torque. For the high efficiency control of SRM, fast excitation and demagnetization of phase current are required. A novel 4-level converter and a new control scheme are present to improve the driving efficiency. The proposed DITC of SRM using 4-level converter is verified by computer simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1007-1008
• /
• 2011

LSPM(Line Start Permanent Motor)은 기존의 가정용으로 널리 사용되고 있는 단상유도기에 영구 자석을 삽입함으로써 별도의 회로 없이 정상상태에서 동기기로 작용하는 고효율의 전동기이다. 하지만 기동시 높은 전류로 인한 전기자 반작용과 온도 상승으로 인하여 자석의 불가역 감자가 빈번하게 일어나는 문제점을 가지고 있다. 이에 본 논문은 모터 형상에 따른 영구자석의 퍼미언스 계산을 통해 동작점을 산정함으로서 불가역 감자가 발생하지 않는 영구자석의 최적의 사이즈를 선정하는데 목적을 두었다.

• Journal of Electrical Engineering and Technology
• /
• 제6권4호
• /
• pp.505-512
• /
• 2011

A novel passive boost power converter forsingle-phaseswitched reluctance motor is presented. A simple passive circuit is proposed comprisingthree diodes and one capacitor. The passive circuitis added in the front-end of a conventional asymmetric converter to obtain high negative bias. Based on this passive network, the terminal voltage of the converter side is a general DC-link voltage level in parallel mode up to a double DC-link voltage level in series mode. Thus,it can suppress the negative torque generation from the tail current and improve the output power. The results of the comparative simulation and experiments forthe conventional and proposed converter verify the performance of the proposed converter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.100-102
• /
• 2007

In this paper, a modified multi-level convert for low cost high speed switched reluctance (SR) drive is proposed The proposed multi-level converter has reduced number of power switches and diodes than that of a conventional asymmetric converter for SRM, and lower voltage rating of the dump capacitor comparing with energy efficient c-dump converter. It can supply five operating modes that is boosted, DC-link, zero, negative bias and negative boosted voltage. The proposed multi-level converter has fast excitation and demagnetization modes of phase current, so dynamic response can be achieved. The proposed multi-level converter is verified by computer simulation and experimental results.