• Journal of Power Electronics
• /
• 제12권6호
• /
• pp.974-981
• /
• 2012

A FPGA based delta modulated single phase matrix converter has been developed that may be used in both cyclo-converters and cyclo-inverters. This converter is ideal for variable speed electrical drives, induction heating, fluorescent lighting, ballasts and high frequency power supplies. The peripheral input-output and FPGA interfacing have been developed through Xilinx 9.2i, to generate delta modulated trigger pulses for the converter. The controller has been relieved of the time consuming computational task of PWM signal generation by implementing the method of trigger pulse generation in a FPGA by using Hardware Description Language VHDL in Xilinx. The trigger circuit has been tested qualitatively by observing various waveforms on an oscilloscope. The operation of the proposed system has been found to be satisfactory.

• 전자공학회논문지
• /
• 제49권11호
• /
• pp.141-148
• /
• 2012

Oversampling 기법을 사용한 analog-to-digital (A/D) 컨버터에서 샘플링 된 신호의 signal bandwidth를 낮추어 주기 위해 데시메이션 필터가 사용된다. 본 논문은 sigma-delta ADC에 사용될 수 있는 저전력 4 단 32 bit 데시메이터 필터 디자인을 제안한다. 디지털 데시메이션 필터는 CIC(cascaded integrator-comb) filter와 세 개의 half-band FIR filter로 이루어져 있다. 전력소모를 최소화하기 위하여 CIC filter에는 pipeline구조가 사용되었고, FIR 필터의 multiplier 구조를 최적화하기 위하여 Canonic Signed Digit (CSD) 코드가 사용되었다. 130nm CMOS 공정으로 설계 자동화 CAD 도구를 사용하여 타이밍, 면적, 전력소모를 최적화하여 98.304 MHz 주파수에서 697 uW의 전력을 소모면서 32 bit, 192 kHz 아웃풋을 낼 수 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 방전 플라즈마 유기절연재료 초전도 자성체연구회
• /
• pp.142-145
• /
• 2004

In this paper, we researched the dielectric properties and voltage dependence on slice XLPE sheet from 22[kV] and 154[kV] power cable. studied effect for impurities and water for semiconductive shied through a dielectric properties experiment to estimate performance of insulating material in power cable. Capacitance and $tan{\delta}$ of 22[kV], 154[kV] were 52/42 pF and $7.4{\times}10^{-4}$, $2.1510^{-4}$, respectively. In these results, the trend was increased with the increase of temperature. The $tan{\delta}$ of XLPE/semiconductive layer and XLPE/water/semiconductive layer were increased as compared with that of XLPE. dielectric properties reliability of $tan{\delta}$ was small.

• 전력전자학회논문지
• /
• 제27권6호
• /
• pp.526-534
• /
• 2022

The modular multilevel converter (MMC) has been widely applied to various industrial areas because of its various advantages and structural characteristics. Therefore, many methods for synthesizing the output voltage of MMC have been studied. Among these methods, phase-shifted pulse width modulation (PSPWM) is frequently used in MMC systems because it has diverse merits, such as excellent output qualities even with a small number of cells and uniform power distribution among cells. In this study, the total harmonic distortion (THD) of the output voltage is analyzed in accordance with the number of cells in one arm of a single-delta bridge cell MMC in order to compare PSPWM methods in terms of the THD of the output voltage. The physical characteristics of the triangle and sawtooth carrier waves used for the PSPWM and the mathematical modeling of output voltage are introduced. Then, the obtained results are verified through real-time simulation of a 1 MW single-delta bridge cell MMC system.

• 품질경영학회지
• /
• 제46권3호
• /
• pp.651-658
• /
• 2018

Purpose: The algorithm described in Lim(1998) is available to determine the sample size directly given specified significance level, power and signal-to-noise ratio. We research on the efficient determination of the sample size by visual methods. Methods: We propose three graphs for investigating the mutual relationship between the sample size r, power $1-{\beta}$ and the detectable signal-to-noise ratio ${\Delta}$. First graph shows the relationship between ${\Delta}$ and $1-{\beta}$ for the given r and it can be checked whether the power is sufficient enough. Second graph shows the relationship between r and ${\Delta}$ for the given power $1-{\beta}$. Third graph shows the relationship between r and $1-{\beta}$ for the given ${\Delta}$. It can be checked that which effects are sensitive to the efficient sample size by investigating those graphs. Results: In factorial design, randomized block design and the split plot design how to determine the sample size directly given specified significance level, power and signal-to-noise ratio is programmed by using R. A experiment to study the split plot design in Hicks(1982) is used as an example. We compare the sample sizes calculated by randomized block design with those by split plot design. By using graphs, we can check the possibility of reducing the sample size efficiently. Conclusion: The proposed visual methods can help an engineer to make a proper plan to reduce the sample size.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권3호
• /
• pp.421-424
• /
• 2016

In order to evaluate the insulation deterioration in the stator windings of air-cooled gas turbine generators(119.2 MVA, 13.8 kV) which has been operating for more than 15 years, diagnostic test and AC dielectric breakdown test were performed on phases A, B and C. Diagnostic test included measurements of AC current, dissipation factor, partial discharge (PD) magnitude and capacitance. ${\Delta}I$ and ${\Delta}tan{\delta}$ in all three phases (A, B, and C) of generator stator windings showed that they were in good condition but PD magnitude indicated marginally serviceable condition. After the diagnostic test, an AC overvoltage test was performed by gradually increasing the voltage applied to the generator stator windings until electrical insulation failure occurred, in order to determine the breakdown voltage. Although phase A of generator stator windings failed at breakdown voltage of 29.0 kV, phases B and C endured the 29.0 kV. The breakdown voltage in all three phases was higher than that expected for good-quality windings (28.6 kV) in a 13.8 kV class generator.

• 대한전자공학회논문지SD
• /
• 제47권11호
• /
• pp.6-12
• /
• 2010

본 논문에서는 시그마-델타 변조기에 기반 한 D급 오디오 증폭기를 제안한다. 16-비트 병렬의 디지털 입력신호는 4-차 디지털 시그마-델타 변조기에 의해 2-비트의 신호로 직렬화되고, 이 신호는 4-차 아날로그 시그마-델타 변조기로 인가된다. 아날로그 시그마 델타 변조기의 출력단의 파워 스위치는 3-레벨로 동작하며, 3-레벨의 펄스 밀도 변조(PDM) 출력 신호는 LC-필터를 통해 저역 통과되어 스피커에 전달된다. 아날로그 시그마-델타 변조기의 첫 단의 적분기는 디지털 시그마-델타 변조기의 출력으로부터 샘플된 이산 시간 영역의 신호를 입력으로 받아들이고, 동시에 파워 스위칭 단의 연속 시간 영역의 출력 신호를 부궤환(feedback) 받기 위해 스위치드-캐패시터 적분기와 연속시간 영역의 적분기를 혼합된 형태로 구현되었다. 제안된 클래스-D 오디오증폭기는 CMOS 0.13-um 공정을 이용해 제작되었으며 100-Hz 부터 20-kHz의 신호 주파수 영역에서 동작한다. 제작된 D급 오디오 증폭기는 4-${\Omega}$ 부하 저항에서 최대 18.3-mW을 내고 0.035-%의 전고조파 왜율(total harmonic distortion pluse noise : THD+N) 성분과 80-dB의 입력신호 대역폭(dynamic range)을 갖는다. 아날로그 및 디지털 변조기는 1.2-V 전원 전압으로 동작하며 총 457-uW의 전력을 소모한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.503-506
• /
• 2003

The photovoltaic generators have a nonlinear V-I characteristics and maximum power points which vary with the illumination levels and temperatures. Using maximum power point tracker with the intermediate converter can increase the system efficiency by matching the PV systems to the load. A novel MPPT control for photovoltaic system is proposed. The system input parameters are (dP, dI, and last incremental of duty ratio $L\deltaD$)and the output is the new incremental value (new ${\deltaD}$) according to the maximum power point under various illumination levels. Using fuzzy logic controller allows extracting the maximum power rapidly and without significant oscillations. Also FLC provides excellent features such as fast response, good performance and the ability to change the fuzzy parameters to improve control system.

• 한국광학회지
• /
• 제1권2호
• /
• pp.210-216
• /
• 1990

본 연구에서는 레이저와 치아조직과의 상호작용에 대한 연구의 일환으로, $CO_2$ 레이저의 발진파장인 $10.6\mu\textrm{m}$의 레이저 빔 조사시에 일어나는 치아의 온도변화를 조사하기 위하여 $CO_2$ 레이저 발진장치를 제작하여 여러 가지 조사 에너지, 조사시간에 대하여 발거된 치아의 치수강의 온도변화를 측정 분석하였다. 측정한 data를 분석하여 최대 상승온도 $\DeltaT_m$를 추정할 수 있는 다음과 같은 실용적인 경험식을 얻었다. $\DeltaT_m=\alphaP\Delta\tauexp(-\betad)$$ 여기서 P는 레이저의 출력(W)이고 $\Delta\tau$는 조사시간(sec), d는 치아의 두께(mm)이다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 추계학술대회 논문집
• /
• pp.69-72
• /
• 2003

The paper presents implementation of a PV fuzzy logic power tracking controller. Using maximum power point tracker with the intermediate converter can increase the system efficiency by matching the PV system to the load. A new fuzzy MPPT is proposed, where fuzzy inputs parameters are dp/dI and the last incremental of duty of duty ratio $L{\delta}D$, and the output is the new incremental value $(new{\delta}D)$ according to the maximum power point under various illumination levels.