• Journal of The Korea Institute of Healthcare Architecture
• /
• v.5 no.9
• /
• pp.47-59
• /
• 1999

With the unparalleled rate of aging and rapid modernization, Korean society faces the situation in which it has to increase the supply of elderly care services dramatically in the near future. Among these services, nursing homes are considered as an essential alternative provision because Korea can no longer rely on traditional familism nor medical facilities for the care of her older population. It is necessary, therefore, to prepare a future plan for the delivery of nursing homes in Korea. This paper has identified elderly care context and analyzed elderly care facilities of Korea in the point of supply and utilization rate of nursing homes according to the region and type of facilities. On the bases of this analysis, the delivery planning of nursing homes in Korea has been proposed in order to increase welfare status of older people and efficient utilization of health care resources.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.2
• /
• pp.35-43
• /
• 1999

The paper describes an approach for measuring delivery flow ripple generated by oil hydraulic axial piston pumps. In order to reduce pressure ripple which cause to undesirable noise. vibration and fatigue in hydraulic systems it is indispensible measure a delivery flow ripple from pumps. Since the flow ripple measurement of flow pumps is independent of the dynamic characteristics of the connected hydraulic circuit the measurement of flow ripple is most suitable for pump fluid-borne noise rating. The measurement of flow ripple with high frequencies from axial piston pumps is made by applying the remote instantaneous flow rate measurement method which is based on the dynamic characteristics between pressure and flow rate in hydraulic pipeline. The measured flow ripple waveforms are influenced by the configuration of V-shaped triangular relief groove in the valve plate. It can be seen that the appropriate relief groove in valve plate reduces the pressure and flow ripple amplitude and frequency spectrum for high harmonics.

• Journal of Pharmaceutical Investigation
• /
• v.22 no.2
• /
• pp.149-153
• /
• 1992

The applicability of sodium alginate as a carrier of 5-fluorouracil as an oral delivery system was investigated. Hydrophobicity of sodium alginate was controlled by introducing cetyl group to this polymer. The effects of degree of esterification for n-cetyl partial ester on the rate of release of 5-fluorouracil in artificial gastric juice and artificial intestinal juice were examined. The release rete of the drug in the gastric juice was mainly affected by the diffusion of the drug. The release rate of the drug in the intestinal juice could be controlled by the degree of esterification. The alginate matrices may be a valuable addition as the carrier of 5-fluorouracil for an oral delivery system.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.26 no.4
• /
• pp.143-153
• /
• 2001

In this study we develop a computer simulation model to evaluate the effects of various production and order processing policies measured in terms of on-time delivery rate and average waiting time of job orders. Policies considered include : eliminating inflated due date, lot splitting, loss time reduction, attaining full flexibility in production lines, and selective order promising scheme. Actual order-production data from a chemical company were used in the simulation model. Based on the simulation results, we make several suggestions that can significantly reduce the production lead time and increase the on-time delivery rate.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.4
• /
• pp.219-228
• /
• 2003

Today, the size of a parcel delivery service market, which is a part of logistics, at home and abroad has been extended rapidly and its growth rate is expected to increase hereafter. At this point, when service is applied strategically in a parcel delivery service, we need to understand the feature of logistics service quality by view of customer differentiation. In this study, we try to constitute a model of the feature of logistics service, which is combined five features of service quality (Responsiveness, Empathy, Reliability, Accuracy and Tangibility) based on measuring model of SERVQUAL with logistics service, and to know the feature of logistics service from parcel delivery service by jobs with statistical tool.

• Progress in Medical Physics
• /
• v.32 no.4
• /
• pp.116-121
• /
• 2021

Purpose: To investigate the effects of dose rate on intensity-modulated radiation therapy (IMRT) quality assurance (QA). Methods: We performed gamma tests using portal dose image prediction and log files of a multileaf collimator. Thirty treatment plans were randomly selected for the IMRT QA plan, and three verification plans for each treatment plan were generated with different dose rates (200, 400, and 600 monitor units [MU]/min). These verification plans were delivered to an electronic portal imager attached to a Varian medical linear accelerator, which recorded and compared with the planned dose. Root-mean-square (RMS) error values of the log files were also compared. Results: With an increase in dose rate, the 2%/2-mm gamma passing rate decreased from 90.9% to 85.5%, indicating that a higher dose rate was associated with lower radiation delivery accuracy. Accordingly, the average RMS error value increased from 0.0170 to 0.0381 cm as dose rate increased. In contrast, the radiation delivery time reduced from 3.83 to 1.49 minutes as the dose rate increased from 200 to 600 MU/min. Conclusions: Our results indicated that radiation delivery accuracy was lower at higher dose rates; however, the accuracy was still clinically acceptable at dose rates of up to 600 MU/min.

• Korean Journal of Community Nutrition
• /
• v.14 no.2
• /
• pp.206-215
• /
• 2009

The purpose of this study was to investigate the current status of foodservice management in organizations delivering meal boxes for low-income children during summer vacation. A survey was conducted with persons in charge of meal box production and service of these organizations via mail. Out of 114 questionnaires distributed nationwide, 100 were analyzed(87.8% analysis rate). Over half(53%) of the organizations delivered meal boxes consisting of rice and side dishes while the rest delivered side dishes only. About 81% of the organizations received KRW 3,000 per meal from their local governments and the rest received KRW 3,500. Only 28% of organizations had employed a dietitian. Over one-third(38%) of the respondents were unaware of the official nutritional standard of the foodservice program for low-income children during vacation. Most of the organizations(94%) had menu planned in advance. The average percentage of food cost was 84.1%. Over 40% of the organizations did not keep food samples for sanitation test(43%) and did not take any measures for keeping food temperature during delivery(45%). The organizations delivering rice and side dishes were more likely to be located in cities rather than rural areas and received higher reimbursement rate. The organizations receiving reimbursement of KRW 3,500 or hiring a dietitian were more likely to use standardized recipes, keep food samples for sanitation test, or take measures for keeping food temperature during delivery compared to the counterparts. Respondents reported that increasing reimbursement rate was the most necessary for improving the quality of meal box. This study results showed that the meal box delivery service for low-income children was not properly managed during the vacation, with regards to menu planning and food production. It is recommended that reimbursement rate for meal boxes should be adjusted depending on meal box types and local conditions.

• Journal of Pharmaceutical Investigation
• /
• v.37 no.3
• /
• pp.167-171
• /
• 2007

Itraconazole is one of the most potent antifungal agents available in the market today. However, the low bioavailability due to its poor-water solubility calls for an alternative formulation to the current oral type. A topical itra-conazole-containing formulation may be of use for several reasons including the opportunity to reduce adverse events and generate high local tissue levels, more rapid drug delivery, and lower systemic exposure. The purpose of the present study was to investigate the vehicles for topical skin delivery of itraconazole. The effect of formulations on the hairless mouse skin permeation and deposition of itraconazole was determined using Franz diffusion cells at $37^{\circ}C$. Benzyl alcohol in micro-emulsion significantly increased the solubility of itraconazole, thereby increasing the skin permeation rate. However, lipo-some formulation showed the lowest solubility and permeation rate of itraconazole. Although the solubility of itraconazole in hydrogel formulation was lower than that in microemulsion, skin permeation rate was significantly higher probably due to its adhesive property. Therefore, microemulsion-based hydrogel formulation is expected to synergistically increase the skin permeation rate and skin deposition of itraconazole.

• The KIPS Transactions:PartD
• /
• v.9D no.2
• /
• pp.259-266
• /
• 2002

The main issue in software development is the ability of software project effort and cost estimation in the early phase of software life cycle. The regression models for project effort and cost estimation are presented by function point that is a software sire. The data sets used to conduct previous studies are of ten small and not too recent. Applying these models to 789 project data developed from 1990 ; the models only explain fewer than 0.53 $R^2$(Coefficient of determination) of the data variation. Homogeneous group in accordance with project delivery rate (PDR) divides the data sets. Then this paper presents general effort estimation models using project delivery rate. The presented model has a random distribution of residuals and explains more than 0.93 $R^2$ of data variation in most of PDR ranges.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.26 no.2
• /
• pp.99-103
• /
• 2020

The volume of parcel delivery is steadily increasing with the rapid growth of the global online e-commerce market. However, a large amount of packaging materials used for these parcel delivery is finally causing environmental problems as waste. In this study, we have taken a pilot test on the returnable parcel delivery packaging & service, which is one of various ways to reduce the generation of the distribution packaging waste raised by e-commerce-based parcel delivery. For the purpose of this project, we made 300 boxes of returnable & foldable delivery packaging(415 mm × 280 mm × 160 mm) and have cooperated with e-commerce company(CJ ENM) & logistics company(LogisAll). Consequently, about 50% of the delivered packages was returned because of the lack of consumer's understanding on the returnable packaging system. We finally have suggested the policy strategy to get over problems derived from the experiment, like the retrieval rate and cost of the returnable packaging, economic efficiency and so on.