• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권4호
• /
• pp.1376-1391
• /
• 2015

In bus delay-tolerant networks, the route of bus is determinate but its arrival time is indeterminate. However, most conventional approaches predict future contact without considering its uncertainty, which makes a limitation on routing performance. A novel approach is proposed by employing interval algebra to characterize the contact's uncertainty and time-varying nature. The contact is predicted by using the Bayesian estimation to achieve a better routing performance. Simulation results show that this approach achieves a good balance between delivery latency and delivery ratio.

• 경영과학
• /
• 제29권1호
• /
• pp.131-141
• /
• 2012

The automated material handling systems today are playing ever more important roles in semiconductor/LCD fabrication facilities. Recently they became more flexible, intelligent, and speedy than in the past. The facilities have been fully automated because the size and weight of the unit loads used in the facilities were being increased beyond the limits that a human operator can handle. This research develops an efficient procedure to streamline the delivery of unit loads by the automated material handling system (AMHS). For this task, the research employs the event scheduling theory that has been successfully used in the both academia and industry. The developed procedure was applied to an actual LCD fabrication facility and improved the performance of an existing material handling system.

• 농촌계획
• /
• 제10권1호
• /
• pp.19-26
• /
• 2004

In this paper, forestry area change effect on the soil erosion in Asan lake watershed was estimated. Temporal variations of land use in the study watershed were analyzed from Landsat-5 TM remote sensing images. Geographic Information System (GIS) combined with Universal Soil Loss Equation (USLE) was used to estimate the soil erosion of Asan lake watershed. Spatial data for each USLE factors was obtained from the Landsat-5 TM remote sensing images and 1/25,000 scale digital contour maps. Sediment yield to Asan lake was estimated by sediment delivery ratio and sediment accumulation in lake was estimated by trap efficiency. The estimation methods were validated for sediment accumulation in Asan lake. From the hydrographic survey from 1974 to 2003 for Asan lake, sediment accumulation was measured. The estimated accumulation sediment of 303,569ton/yr showed similar value with observed of 295,888ton/yr. From the validated estimation methods, the increasing amount of soil erosion when 1% of forest area in Asan lake watershed decreases was calculated from 12.91 to 1482.05ton/yr.

• 한국수자원학회논문집
• /
• 제34권3호
• /
• pp.199-207
• /
• 2001

개발에 의하여 증가된 토사유출량의 유역외 배출을 최소화하기 위한 침사지 등의 설계에 필요한 검증된 토사유출량 산정기법이 국내에는 없는 실정이다. 따라서 본 연구에서는 현재까지 개발된 각종 장·단시간 호우에 대한 외국의 토사유출량 산정 기법들 중 개정범용토양손실공식(RUSLE)의 국내 적용 가능성을 검토하였다. 전국 7개 개발현장에서 실측한 강우 및 토사유출량 자료를 RUSLE공식에 적용, 그 적용범위 및 한계성 등을 검토한 결과 국내 개발지역에 대한 토사생산량 산정기법으로써의 가능성을 확인하였으며 RUSLE공식의 적용시 우리나라에서 많이 범하고 있는 각 인자별 산정 오류에 대해서도 검토하였다. RUSLE공식 적용시 필요한 토사전달률에 대해서도 우리나라에 적합한 두 가지 기법을 제시하였다.

• 산업경영시스템학회지
• /
• 제45권4호
• /
• pp.127-133
• /
• 2022

Many manufacturers applying third party logistics (3PLs) have some challenges to increase their logistics efficiency. This study introduces an effort to estimate the weight of the delivery trucks provided by 3PL providers, which allows the manufacturer to package and load products in trailers in advance to reduce delivery time. The accuracy of the weigh estimation is more important due to the total weight regulation. This study uses not only the data from the company but also many general prediction variables such as weather, oil prices and population of destinations. In addition, operational statistics variables are developed to indicate the availabilities of the trucks in a specific weight category for each 3PL provider. The prediction model using XGBoost regressor and permutation feature importance method provides highly acceptable performance with MAPE of 2.785% and shows the effectiveness of the developed operational statistics variables.

• 대한토목학회논문집
• /
• 제41권4호
• /
• pp.429-439
• /
• 2021

고령화로 인한 건설인력 감소에 대응하고 건설현장의 생산성 향상을 위해 일본에서는 2016년부터 정보통신기술을 활용한 자동화시공을 추진하고 있다. 일본 국토교통성은 ICT를 활용한 토공 자동화 시공을 뒷받침 할 새로운 비용 산정기준, 발주제도, 정부지원 정책을 마련하여 시행하고 있고 현장에서 활용할 수 있는 자동화 시공의 종류를 확대하고 있다. 우리나라도 ICT를 건설 현장에 원활하게 적용하기 위해서는 일본에서와 같이 우선적으로 ICT를 활용한 자동화 시공 관련 법과 제도, 정책 등을 정비해야 한다. 본 논문은 일본과 한국의 ICT를 활용한 자동화시공 관련 제도 및 정책을 비교·분석하여 벤치마킹하는 방법으로 연구하고 이로부터 시사점을 찾고자 했다. 연구 결과, 국내 건설현장에서 ICT기술을 활용하기 위해서는 한국 정부가 선도적으로 ICT기술 관련 비용 산정기준, 발주체계, 경제지원 정책 등을 마련해야 한다는 결론에 이르게 되었다.

• 한국물환경학회지
• /
• 제25권3호
• /
• pp.375-385
• /
• 2009

The estimation of delivery ratio is a essential part of Korean Total Maximum Daily Loads (TMDL) procedure which needs a number of observed stream flow and pollutants data. If observed data were not sufficient, researchers have to find other alternatives. One of them is to make indirect data by using watershed models, such as Soil and Water Assessment Tool (SWAT) and Hydrological Simulation Program - FORTRAN (HSPF) and so on. In this study, indirect daily data was made by using SWAT model. To build the Byongseong-SWAT model accurately, crop cultures are reflected by handling the MGT.file in SWAT model. Especially, mass of manure and schedule of crop culture are inputted through investigating domestic research papers as well as fieldwork. After calibrating SWAT model in comparison with the 22-years flow and pollutants observed outlet data, the delivery ratio of Byongseong watershed is calculated by using daily simulated data during 2004-2007. Empirical equations for delivery ratio through multi-regression analysis are developed by using meteorological and physical factors such as flow, watershed area, stream length, catchment slope, curve number (CN) and subbasin's pollutant discharge loads.

• 한국농공학회논문집
• /
• 제50권1호
• /
• pp.13-21
• /
• 2008

Water losses in irrigation canals are mainly estimated as the sum of conveyance and delivery water loss. The losses occur via the evaporation, infiltration, gate operation and water distribution processing. Recently, the study regarding these water losses are not satisfactory enough, also delivery water loss has not been mainly considered on field design. The objective of this study is to investigate and analyze the volume of water loss in irrigation canals considering condition of actual farm land. A field measurement was performed at four research sites, which are managed by Korea Rural Community & Agriculture Corporation, to evaluate conveyance and delivery water loss for 2 years. The measurement was performed by canal type, size and designed flow using the inflow-outflow method at a major points such as start and end of each canal, derivation point of canal and inlet of paddy fields. Results of this study showed that water loss ratio in lateral canals was bigger than that of main canal unlike current design standard and the loss decrease as flow increase. The total of water loss ratio including conveyance and delivery water loss in several irrigation canals ranged between 33.25 and 45.0%.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.534-539
• /
• 2005

The purpose of this study is the introduction of pollutant loads's estimation into Saemangeum watershed area with M.E.'s guidebook for TMDL and GIS tool. To estimate reliable pollutants loads, it is necessary to think about characteristic of removal, discharge and runoff as time series. In this study, it was calculated for generation loads which be came from pollutant source, discharge loads which be reduced in the treatment facilities and delivery loads which be considered the self purification parameter and delivery distance. To assess the delivery distance handily, it was particularly estimated using Arc-GIS. It was met with good results that delivery loads of BOD, T-N and T-P was reflected to seasonal precipitation. Lastly to verify the estimated pollutant loads, HSPF developed by USEPA was applied to it. It was showed a relativity of observed to simulated data for flow, Temperature, DO, BOD, $NO_3^--N$ TN and TP. Consequantly, this delivery loads can make full use of model input data for prediction of pollutant loads.

• Journal of Communications and Networks
• /
• 제15권6호
• /
• pp.635-644
• /
• 2013

Adaptive hypertext transfer protocol (HTTP) streaming has become a new trend to support adaptivity in video delivery. An HTTP streaming client needs to estimate exactly resource availability and resource demand. In this paper, we focus on the most important resource which is bandwidth. A new and general formulation for throughput estimation is presented taking into account previous values of instant throughput and round trip time. Besides, we introduce for the first time the use of bitrate estimation in HTTP streaming. The experiments show that our approach can effectively cope with drastic changes in connection throughput and video bitrate.