• Progress in Medical Physics
• /
• v.19 no.1
• /
• pp.42-48
• /
• 2008

Bio-implantable devices such as heart pacers, gastric pacers and drug-delivery systems require power for carrying out their intended functions. These devices are usually powered through a battery implanted with the system or are wired to an external power source. This paper describes an inductive power transmission link, which was developed for an implantable stimulator for direct stimulation of denervated muscles. The carrier frequency is around 1MHz, the transmitter coil has a diameter of 46mm, and the implant coil is 46mm. Data transmission to the implant with amplitude shift keying (ASK) and back to the transmitter with passive telemetry can be added without major design changes. We chose the range of coil spacing (2 to 30mm) to care for lateral misalignment, as it occurs in practical use. If the transmitter coil has a well defined and reliable position in respect to the implant, a smaller working range might be sufficient. Under these conditions the link can be operated in fixed frequency mode, and reaches even higher efficiencies of up to 37%. The link transmits a current of 50 mA over a distance range of 2-15 mm with an efficiency of more than 20% in tracking frequency. The efficiency of the link was optimized with different approaches. A class E transmitter was used to minimize losses of the power stage. The geometry and material of the transmitter coil was optimized for maximum coupling. Phase lock techniques were used to achieve frequency tracking, keeping the transmitter optimally tuned at different coupling conditions caused by coil distance variations.

• Journal of Engineering Education Research
• /
• v.10 no.3
• /
• pp.79-92
• /
• 2007

To enhance the excellence, effectiveness and economical efficiency in the learning process, we implement a hybrid educational system for engineering experiments where web-based virtual laboratory systems and distance education systems are properly integrated. In the first stage, we designed client/server distributed environment and developed web-based virtual laboratory systems for digital systems and electrical/electronic circuit experiments. The proposed virtual laboratory systems are composed of four important sessions and their management system: concept learning session, virtual experiment session, assessment session. With the aid of the management system every session is organically tied up together to achieve maximum learning efficiency. In the second stage, we have implemented efficient and cost-effective distant laboratory systems for practicing electric/electronic circuits, which can be used to eliminate the lack of reality occurred during virtual laboratory session. The use of simple and user-friendly design allows a large number of people to access our distant laboratory systems easily. Thus, self-guided advanced training is available even if a lot of expensive equipment will not be provided in the on-campus laboratories. The proposed virtual/distant laboratory systems can be used in stand-alone fashion, but to enhance learning efficiency we integrated them and developed a hybrid educational system for engineering experiments. Our hybrid education system provides the learners with interactive learning environment and a new approach for the delivery of engineering experiments.

• Journal of Plant Biotechnology
• /
• v.29 no.4
• /
• pp.223-228
• /
• 2002

We have developed a homemade particle inflow gun (PIG) system which has simple operation method, low price and high gene introduction efficiency into rice callus. Rice callus were inflowed with gold particles containing DNA of a plasmid, pIG121Hm, harboring intron GUS ($\beta$-glucuronidase) gene, NPTII gene and HPT gene. For optimal GUS transient expression, the effects of parameters on DNA delivery efficiency of the PIG system was investigated by scoring transient GUS expression. The highest number of blue spots was observed at 16 mM of spemidine and 1.5 M of calcium chloride, respectively. And the amount of gold particles required for the best GUD expression was 2 mg. Optimum GUS transient expression was observed at target distance of 12 cm and helium pressure of 3.5 bar (50 psi). Gene introduction efficiency of the PIG system was observed almost similar to that of the Biolistic Gun (Bio-Rad Company). Since PIG system is simple to operate and one doesn't need disposable accessaries, the PIG system can be easily applied to various replication experiments.

• Journal of Plant Biotechnology
• /
• v.37 no.1
• /
• pp.77-83
• /
• 2010

Eighteen cultivars of tomato were tested for their regeneration response. Lycopersicon esculentum cv. 2001-58 showed a very high frequency of regeneration (93%). We evaluated the effect of two compounds with known antioxidant activity (ascorbic acid and cystein). The use of ascorbic acid ($200\;-\;300\;{\mu}M/L$) has a positive effect on shoot regeneration. To develope a system for plastid transformation in tomato via homologous recombination, we constructed the tomato plastid expression vector (pKRT22-AG) harboring 2.2 kb flanking sequences cloned from intact plastid genome and gfp gene. To investigate the factors affecting the delivery system of the pKRT22-AG into chloroplast using bombardment, We assessed the optimal DNA concentration, gold particle volume and target distance. Expression of the GFP protein was observed within chloroplast on protoplast of cotyledon explant by confocal laser scanning microscopy, which indicates that the protocol developed in this study be useful for the production of plastid transgenic plants in tomato.

• The KIPS Transactions:PartC
• /
• v.12C no.3 s.99
• /
• pp.429-436
• /
• 2005

A mobile ad hoc network (MANET) is a collection of mobile nodes without any fixed infrastructure or my form of centralized administration such as access points and base stations. The ad hoc on-demand distance vector routing (AODV) protocol is an on-demand routing protocol for MANETs, which is one of the Internet-Drafts submitted to the Internet engineering task force (IETF) MANET working group. This paper proposes a new multipath routing protocol called maximally disjoint multipath AODV (MDAODV), which exploits maximally node- and link-disjoint paths and outperforms the conventional multipath protocol based on AODV as well as the basic AODV protocol. The key idea is to extend only route request (RREQ) message by adding source routing information and to make the destination node select two paths from multiple RREQs received for a predetermined time period. Compared to the conventional multipath routing protocol, the proposed MDAODV provides more reliable and robust routing paths and higher performance. It also makes the destination node determine the maximally node- and link-disjoint paths, reducing the overhead incurred at intermediate nodes. Our extensive simulation study shows that the proposed MDAODV outperforms the conventional multipath routing protocol based on AODV in terms of packet delivery ratio and average end-to-end delay, and reduces routing overhead.

• Journal of Broadcast Engineering
• /
• v.24 no.6
• /
• pp.948-955
• /
• 2019

As interests in 360-degree VR (Virtual Reality) video services enormously grow, compression and streaming technologies for VR video data have been rapidly developed. Quality Emphasized Region (QER) based streaming scheme has been developed as a kind of viewport-adaptive 360-degree video streaming technology for maintaining immersive experience and reducing bandwidth waste. For selecting a QER corresponding to the user's gaze coordinate, QER-based streaming scheme requires the calculation of Quality Emphasis Center (QEC) distance and signaling message delivery for requesting QER switching. QEC distance calculations require high computational complexity because of repeated calculations as many times as the number of QERs. Furthermore, the signaling message interval results in a trade-off relationship between efficient bandwidth usage and flexible QER switching. In this paper, we propose an improved QER selection algorithm based on MMT protocol to solve this problem. The proposed algorithm could achieve computational complexity reduction by using preprocessed QER_ID_MAP. Also, flexible QER switching could be achieved, as well as efficient bandwidth utilization by an adaptive adjustment of the signaling interval.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2334-2339
• /
• 2009

In case of an embedded system having an LCD panel with touch-screen capability, various figures such as rectangles, pentagons, circles, and arrows are frequently used for the delivery of user-input commands. In such a case, it is necessary to have an algorithm that can recognize whether a touched location is within a figure on which a specific user-input command is assigned. Such algorithms, however, impose a considerable amount of overhead for embedded systems with restricted amount of computing resources. This paper first describes a method for initializing and driving a touch-screen LCD and a coordinate-calibration method that converts touch-screen coordinates into LCD panel coordinates. Then it introduces methods that can be used for recognizing touched areas of rectangles, many-sided figures like pentagons, and circles; they are a range checking method for rectangles, a crossing number checking method for many-sided figures, a distance measurement method for circles, and a color comparison method that can be applied to all figures. In order to evaluate the performance of these methods, we implement two-dimensional graphics functions for drawing figures like triangles, rectangles, circles, and images. Then, we draw such figures and measures times spent for the touched-area recognition of these figures. Measurements show that the range checking is the most suitable method for rectangles, the distance measurement for circles, and the color comparison for many-sided figures and images.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.4
• /
• pp.1-8
• /
• 2014

Appropriate amount of water supply to paddy fields in proper time is important to achieve efficient agricultural water management. The purpose of this study is to evaluate the irrigation water supply adequacy for paddy fields using water level data in irrigation canals. For the evaluation, the real-time water level data were collected from main canals in the Dongjin irrigation district for 2 years. Using the water level data, delivered irrigation water amounts at the distribution points of each canal were calculated. The water balance model for paddy field was designed considering intermittent irrigation and the irrigation water requirement was estimated. Irrigation water supply adequacy was analyzed from main canals to the irrigation blocks based on the comparison between estimated requirement and delivered irrigation water amounts. From the adequacy analysis, irrigation water supply showed poor management condition in 2012 with low efficiency except the Daepyong canal section, and the adequacy in 2013 was good or fair except the Yongsung canal section. When irrigation water for paddy fields was insufficient, water supply adequacy was affected by irrigation area, but when irrigation water was enough to supply, adequacy was affected by distance from main canal to distribution points. These results of the spatial and temporal dimensions of the irrigation adequacy could be utilized for efficient irrigation water management to improve the temporal uniformity and equity in the water distribution for paddy fields.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.797-798
• /
• 2012

The purpose of this study to embody LED visible light communication visual signal delivery system based on TFT-LCD module and to analyze a performance for digital signals. LED lighting enables to transmit data through light, to embody visible light communication, and to control lights in different wavelengths according to LED materials and structural materials. In this study, we aim to create a transmitting and receiving sensor that has implemented LED and visual sensors to LED efficiency and existing TFT-LCD module so as to estimate and indicate a communication distance and to find out application methods and problems. Also, by implementing TFT-LCD technology and next-generation LED visual communication technology, this study aims to check the possibility of technological realization by applying them to various means of communication including ubiquitous communication.

• The KIPS Transactions:PartC
• /
• v.14C no.2
• /
• pp.191-198
• /
• 2007

A mobile ad-hoc network (MANET) is an autonomous, infrastructure-less system that consists of mobile nodes. In MANET, on demand routing protocols are usually used because network topology changes frequently. AODV, which is a representative on demand routing protocol, operates using the routing table of each node that includes next hop of a route for forwarding packets. It maintains the established route if there is not an expiration of route or any link break. In the paper, we propose a partially adaptive route maintenance scheme (AODV-PA) based on AODV, which provides dynamic route modification of initial route for selecting the effective route using not only next hop but also next-hop of next-hop (i.e. 2-hop next node) acquired through route discovery process. In addition, the proposed scheme additionally manages the routing table for preventing exceptional link breaks by route modification using HELLO messages. We use NS 2 for the computer simulation and validate that the proposed scheme is better than general AODV in terms of packet delivery ratio, latency, routing overhead.