• Journal of dental hygiene science
• /
• v.21 no.4
• /
• pp.243-250
• /
• 2021

Background: Endodontic sealers or their toxic components may become inflamed and lead to delayed wound healing when in direct contact with periapical tissues over an extended period. Moreover, an overfilled sealer can directly interact with adjacent tissues and may cause immediate necrosis or further resorption. Therefore, the treatment outcome conceivably depends on the endodontic sealer's biocompatibility and osteogenic potential. This study aimed to evaluate the cell viability and osteogenic effects of four different sealers in osteoblastic cells. Methods: AH Plus (resin-based sealer), Pulp Canal Sealer EWT (zinc oxide-eugenol sealer), BioRoot RCS (calcium silicate-based sealer), and Well-Root ST (MTA-based calcium silicate sealer) were mixed strictly according to the manufacturer's instructions, and dilutions of sealer extracts (1/2, 1/5 and 1/10) were determined. Cell viability was measured using the water-soluble tetrazolium-8 (WST-8) assay. Differentiation was assessed by alkaline phosphatase (ALP) activity and mineralized nodule formation by Alizarin Red S staining. Results: The cell viability of the extracts derived from the sealers excluding Well-Root ST was concentration dependent, with sealer extracts having the least viability at a 1/2 dilution. At sealer extract dilution of 1/10, the test groups showed the same survival rate as that control group, with the exception of BioRoot RCS. Among all experimental groups, BioRoot RCS showed the highest cell viability after 48 hours. The ALP activity was significantly higher in a concentration-dependent manner. Furthemore, all four materials promoted ALP activity and mineralized nodule formation compared to the control at 1/10 dilutions. Conclusion: This is the first study to highlight the differences in biological activity of these four materials. These results suggest that the composition of root canal sealers appears to alter the form of biocompatibility and osteoblastic differentiation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.2
• /
• pp.248-251
• /
• 1983

The effects of shading - 90, 70, 50, 30, 10% on curing burley tobacco was investigated in pipe vinyl houses. The curing in sunlight under transparent materials resulted in an increase in temperature and a decrease in relative humidity. But amount of light on tobacco leaves were less than 10% sun light in all treatments. Shading was delayed curing period, but cured leaves under transparent shading materials were off color and brittle. Filling power and combustibility were deteriorated as decreased shading. But quality of cured leaves were non significant between treatments. Effects of shading were believed that resulted in a decrease in temperature and an increase in relative humidity than light.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.4
• /
• pp.316-326
• /
• 2014

Determination of the late marginal heading date (LMHD), which would allow estimation of the late marginal seeding date and the late marginal transplanting date, would help identification of potential double cropping areas and, as a result, establishment of cropping systems. The objective of this study was to determine the LMHD at 51 sites in Korea. For these sites, weather data were obtained from 1971 to 2000 and from 1981 to 2010, which represent past and current normal climate conditions, respectively. To examine crop productivity on the LMHD, climatic yield potential (CYP) was determined to represent the potential yield under a given climate condition. The LMHD was calculated using accumulated temperature for 40 days with threshold values of $760^{\circ}C$, $800^{\circ}C$, $840^{\circ}C$ and $880^{\circ}C$. The value of CYP on a given LMHD was determined using mean temperature and sunshine duration for 40 days from the LMHD. The value of CYP on the LMHD was divided by the maximum value of CYP (CYPmax) in a season to represent the relative yield on the LMHD compared with the potential yield in the season. Our results indicated that the LMHD was delayed at most sites under current normal conditions compared with past conditions. Spatial variation of the LMHD differed by the threshold temperature. Overall, the minimum value of CYP/CYPmax was 81.8% under all of given conditions. In most cases, the value of CYP/CYPmax was >90%, which suggested that yield could be comparable to the potential yield even though heading would have occurred on the LMHD. When the LMHD could be scheduled later without considerable reduction in yield, the late marginal transplanting date could also be delayed accordingly, which would facilitate doublecropping in many areas in Korea. Yield could be affected by sudden change of temperature during a grain filling period. Yet, CYP was calculated using mean temperature and sunshine duration for 40 days after heading. Thus, the value of CYP/CYPmax may not represent actual yield potential due to change of the LMHD, which suggested that further study would be merited to take into account the effect of weather events during grain filling periods on yield using crop growth model and field experiments.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.4
• /
• pp.304-310
• /
• 2017

This study was conducted over a 3-year period from 2013 to 2015 in the mid-northern inland, Cheolweon, Korea, to investigate changes in flowering date, daily mean temperature during grain filling, and yield characteristics affected by transplanting date in an early-maturing rice variety, 'Joun'. Thirty-day-old seedlings were transplanted at four different dates at 15-day interval from May 5 to June 19. Flowering dates were July 16, July 21, July 31, and August 14 when transplanting was performed on May 5, May 20, June 4, and June 19, respectively. Late transplanting resulted in higher daily mean temperature before flowering but late-transplanted rice required fewer days and lower cumulative temperature to reach flowering from transplanting. As transplanting was delayed, daily mean temperature for 40 days after flowering decreased, whereas daily sunshine hours for the same period increased, with a temperature of $24.8^{\circ}C$ and sunshine for 5.8 hours being recorded at the transplanting on May 5, and with a temperature of $21.0^{\circ}C$ and sunshine for 7.7 hours at the transplanting on June 19. With late transplanting, panicles per square meter significantly decreased, whereas spikelets per panicle showed an increasing trend. Regression analysis showed that maximum head rice yield was attained from the transplanting on May 18, for which the flowering date was July 21, and daily mean temperature for 40 days from that flowering date was $24.6^{\circ}C$. A decrease in head rice yield by 5% and 10% of the maximum was observed for rice transplanted on June 6 and June 15, which resulted in flowering dates of August 2 and August 11, respectively, and the daily mean temperatures for 40 days from flowering were 23.2 and $21.7^{\circ}C$, respectively. Therefore, in mid-northern inland, it is recommended to transplant 'Joun' on May 18 to induce flowering on July 21, when grain filling is subjected to a daily mean temperature of $24.6^{\circ}C$ during active filling stage.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.2
• /
• pp.63-69
• /
• 2019

Black-colored rice contains anthocyanin, which has an antioxidant function on the seed coat. Anthocyanin content is greatly affected by the cultivation environment, especially the average temperature during the ripening stage. Generally, low temperatures during the ripening stage increase anthocyanin content. To control the average temperature during ripening stage in the field, transplanting time has to be regulated. In this study, anthocyanin content variation was examined in relation to the transplanting time and the average temperature during the ripening stage. For the study, fourteen black-colored rice cultivars with different maturity types (four of early-maturing, five of medium-maturing, and five of medium-late maturing) were selected. The transplanting times used were May 20, June 5, June 20, and June 30. The field experiment was conducted in the Miryang, Kyoungsangnamdo province, Korea from 2014 to 2017. The anthocyanin content in all cultivars was higher when the transplanting time was delayed, and the highest anthocyanin content was observed in the transplanting on June 30. Variation in anthocyanin content according to the change in transplanting time is the greatest in the early maturing cultivars. The least change was observed in medium maturing cultivars. Regression analysis showed a significant correlation between temperature and anthocyanin content, but the degree of correlation was very low in the medium maturing cultivar. As a result, the optimal average temperature during the grain filling stage for increasing the anthocyanin content of black colored rice was $22{\sim}23^{\circ}C$. The rice yield increased in plants transplanted until June 20 and decreased thereafter owing to low temperature during the grain filling stage. The anthocyanin content increased with delaying the transplanting time up to June 30 but the rice yield decreased after June 20. Nevertheless, the rate of increase in anthocyanin content was higher than the rate of decrease in rice yield. As a result, the optimum transplanting time and an average temperature of grain filling stage for black-colored rice variety were June 30 and $23{\sim}24^{\circ}C$ considering both anthocyanin content and rice yield.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.3
• /
• pp.307-315
• /
• 2016

The aim of this research is analyzing the fundamental properties and autogenous shrinkage reducing performance of 70 and 100MPa grade high performance concrete including emusified refined cooking oil(ERCO) under the mock-up conditions. As a results of experiment, the mixture contained 0.5% of ERCO showed slightly decreased slump flow while the slump was increased and segregation resistance performance was improved as 2.5 of EIS. For air content, all mixtures satisfied target air content with increased unit weight and delayed setting time with ERCO addition. In the case of compressive strength, when ERCO was added 0.5%, the result of approximately 5 to 10% of increased compressive strength was observed. For the autogenous shrinkage, ERCO contributed on 20-30% of shrinkage reducing performance comparing to Plain mixture without ERCO. It is considered that capillary pore filling action of soap particles occurred by the reaction of ERCO in cement paste between fatty aicd and calcium hydroxide contributed the shrinkage reducing performance. Based on these mock-up test results, application of the high performance concrete mixture with ERCO on CFT actual structure was decided.

• Archives of Plastic Surgery
• /
• v.38 no.3
• /
• pp.228-234
• /
• 2011

Purpose: Reconstruction of chest wall has always been a challenging problem. Muscle flaps for chest wall reconstruction have been helpful in controling infection, filling dead space and covering the prosthetic material in this challenge. However, when we use muscle flaps, functional and cosmetic donor site morbidities could occur. The authors applied and revised various partial muscle flaps and combination use of them to cover the prosthetic material for the chest wall reconstruction and evaluated the usefulness of partial muscle flaps. Methods: This study included 7 patients who underwent chest wall reconstruction using partial muscle flap to cover prosthetic material from 2004 to 2008. The pectoralis major muscle was used in anterior 2/3 parts of it leaving lateral 1/3 parts of it. The anterior 2/3 parts of the pectoralis major muscle were used while lateral 1/3 parts were left. In case of the rectus abdominis muscle flap, we used upper half of it, or we dissected it around its origin and then advanced to cover the site. The latissimus dorsi muscle flap was elevated with lateral portion of it along the descending branch of the thoracodorsal artery. If single partial muscle flap could not cover whole prosthetic material, it would be covered with combination of various partial muscle flaps adjacent to the coverage site. Results: Flap coverage of the prosthetic material and chest wall reconstructions were successfully done. There occurred no immediate and delayed post operative complications such as surgical site infection, seroma, deformity of donor site and functional impairment. Conclusion: When we use the muscle flaps to cover prosthetic material for chest wall reconstruction, use of the partial muscle flaps could be a good way to reduce donor site morbidity. Combination of multiple partial flaps could be a valuable and good alternative way to overcome the disadvantages of partial muscle flaps such as limitation of volume and size as well as flap mobility.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.3
• /
• pp.239-243
• /
• 2008

This experiment was carried out to elucidate the appropriate split application method of nitrogen fertilizer in infant rice seedlings which show poor seedling growth resulted from extended seedling nursery duration more than 12 days. The 16 day-old infant rice seedling (DOIRS) showed poor seedling growth than 8 day-old seedling. Early growth of transplanted 16 DOIRS was poor, compared with that of transplanted 8 DOIRS. However, the poor plant growth estimated by plant height, tiller number, and the number of newly developed roots was compensated by 70-0-30% (basaltillering-panicle initiation) of nitrogen split application. In 70-0-30% plots among split nitrogen application methods, tiller number, biomass, and leaf area at heading stage of rice showed the highest values. Sixteen DOIRS plots showed lower grain filling and 1000-grain weight, resulted in lower yield of rice than 8 DOIRS plots in the same nitrogen split application. However the lower yield in 16 DOIRS plots was recovered by 70-0-30% of nitrogen split application method to a similar level in 8 DOIRS plots in which nitrogen was split applied by 40-30-30%.

• Journal of Pharmaceutical Investigation
• /
• v.29 no.3
• /
• pp.227-234
• /
• 1999

Solid dispersions were prepared to increase the dissolution rate of biphenyl dimethyl dicarboxylate (DDB) using water-soluble carriers such as povidone, copolyvidone, $2-hydroxypropyl-{\beta}-cyclodextrin (HPCD)$, sodium salicylate or sodium benzoate by solvent evaporation method. Solid dispersions were characterized by infrared spectrometry, differential scanning calorimetry (DSC) and powder X-ray diffractometry, dissolution and permeation studies. DDB tablets (7.5 mg) were prepared by compressing the powder mixtures composed of solid dispersions, lactose, com starch, crospovidone and magnesium stearate using a single-punch press. DDB capsules (7.5 mg) were also prepared by filling the mixtures in empty hard gelatin capsules (size No.1). From the DSC and powder x-ray diffractometric studies, it was found that DDB was amorphous in the HPCD or copolyvidone solid dispersions. Dissolution rates after 10 min of DDB alone and solid dispersions (1 : 10) in sodium benzoate, sodium salicylate and copolyvidone were 11.8, 23.5, 22.8 and 82.5%, respectively. Dissolution rates of DDB after 30 min from 1 : 10 and 1 : 20 copolyvidone solid dispersions were 80.5 and 95.0%, respectively. For the DDB tablets prepared using solid dispersions (1 : 20), the initial dissolution rate was dependent on carrier material, and was ranked in order, $Kollidon\;30\;{\ll}$ copolyvidone < HPCD. For the HPCD solid dispersion tablets, dissolution rate reached 97.4% after 15 min, but thereafter slowly decreased to 80.7% after 2 hr due to the precipitation of DDB. However, in the case of copolyvidone solid dispersion tablets, dissolution increased linearly and reached 93.4% after 2 hr. Reducing the volume of test medium from 900 to 300 ml markedly decreased the dissolution rate of the tablets containing 1 : 20 HPCD solid dispersions and 1 : 10 copolyvidone solid dispersion. For 1 : 20 copolyvidone solid dispersion tablets, there was no significant change in dissolution rate up to 1 hr with different volumes of test medium. Preparation of the copolyvidone solid dispersion (1 : 20) in capsules markedly delayed the dissolution (31.2 % after 2hr) due to the limited diffusion within capsules. The permeation rate $(13.4\;g/cm^2\;after\;8\;hr)$ of DDB through rabbit duodenal mucosa from copolyvidone solid dispersion (1 : 10) was markedly enhanced, when compared with drug alone or physical mixtures. From overall findings, DDB formulations containing copolyvidone solid dispersions (1 : 20) could be used to remarkably improve the dissolution rate in dosage form of powders and tablets.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.4
• /
• pp.424-429
• /
• 2012

This study was carried out to investigate the influence of different planting time on the synthesis of isoflavone in black soybean, Three varieties used in this experiment were lpumgeomjeongkong, Cheongjakong and Heugcheongkong which had different ecotypes, repectively. Seeds were sown at different time, May 15th, May 30th and June 15th with planting density of $60{\times}15cm$. In order to analyze the content of isoflavone, we collected sample every 5 days from 30 days after flowering to harvest and analyzed them with UPLC. As sowing was delayed, the content of isoflavone increased in all of three varieties. The content of genistein was greater than daidzein and glycitein. Increase of Glycitein was not distinct from 55 days after flowering(DAF) and it was stable against temperature change during the seed developing period. Although the content of genistein in Ilpumgeomjeongkong from 50 to 55 DAF, in Cheongjakong from 40 to 55 DAF and in Heugcheongkong from 60 to 65 DAF was lower than the content of daidzein, it was higher than that of daidzein afterward. In the statistical analysis on the relationship between average temperature and the content of aglycone isoflavone at 5-day intervals from 30 DAF during the grain filling period, genistein in Ilpumgeomjeongkong showed meaningful correlation as y=-15.28x+407.9 ($R^2=0.505^*$), diadzein in Cheongjakong showed meaningful correlation as y=-6.188x-164.5($R^2=0.454^*$), and genistein showed significantly high correlation as y=-11.59x+297.6 ($R^2=0.545^{**}$). Taking all the above results into consideration, it was suggested that the regions suitable for high content of isoflavone in black soybean be the northern area of Gyeonggi-do and Gangwon-do, Chungcheongbuk-do and inland area of Gyeongsangbuk-do, where are relatively low average temperature from flowering stage($R_2$) during the grain filling period.