• 한국분무공학회지
• /
• 제21권1호
• /
• pp.20-28
• /
• 2016

This paper presents an experimental study on the GDI injector with Bosch method. The injection characteristics, such as the injection quantity, the injection rate, the maximum velocity of the nozzle exit and the injection delay were studied through the change of the injection pressure, the tube pressure and energizing duration in injection rate measurement device using nheptane. The injection quantity is increased by increasing injection pressure, decreasing tube pressure or increasing energizing duration. As the difference of the injection quantity changed, the shape of injection rate was moved with a constant form. The maximum velocity of the nozzle exit showed a tendency to increase as the injection pressure is increased. However, tube pressure did not affect. Overall, it was confirmed that the closing delay is longer than the opening delay in all conditions. As the injection pressure increased, the result has a tendency to decrease the closing delay, it did not affect the opening delay. Reduction of the closing delay showed the reduction of the injection duration. the tube pressure and energizing duration did not affect the injection delay (opening delay, closing delay).

• ETRI Journal
• /
• 제25권6호
• /
• pp.437-444
• /
• 2003

We derive a new joint power and rate control rule with which we can minimize the mean transmission delay in CDMA networks for a given mean transmission power. We show that it is optimal to respectively control the power inverse-linearly and the rate linearly to the square root of channel gain while maintaining the signal-to-interference ratio at a constant. We also show that the proposed joint power/rate control rule achieves excellent performance results in terms of the probability of the instantaneous delay being within a target delay against one-dimensional control schemes.

• 한국전자파학회논문지
• /
• 제15권3호
• /
• pp.265-270
• /
• 2004

본 논문에서는 group delay가 위성 통신 시스템에 미치는 영향을 분석한다. 일정한 상수가 아닌 group delay에서는 신호의 위상 왜곡이 발생한다. Group delay는 특성에 따라 linear, parabolic, cubic으로 모델링할 수 있다. 각각의 group delay 특성을 위성통신 시스템에 적용하여 BER(bit error rate)을 분석한다. Group delay는 신호의 대역폭이 커질수록 신호에 미치는 영향이 커지는 특성을 갖고 있으며, 위성 통신 시스템의 정보 전송속도가 1Mbps, 4Mbps, 8Mbps 의 세 가지인 경우에 대하여 BER을 분석한다. 이때 channel coding으로는 구속장이 7이고, code rate 1/2인 convolution coding과 7/8 punctured convolution coding 를 이용한다. BER = $10^{-5}$을 만족하는 요구 SNR을 관찰하였을 때, group delay의 영향을 받는 데이터는 group delay의 영향을 받지 않은 데이터에 비해 요구 SNR은 최소 0.3㏈에서 최대 4.4㏈으로 증가한다. 이들 중 group delay에 의한 영향이 가장 큰 경우는 group delay의 특성이 linear 특성이고 channel coding이 7/8 puncture convolution coding, 전송속도가 8 Mbps인 경우로서 이때 요구 SNR은 4.4㏈증가한다.

• 화약ㆍ발파
• /
• 제18권1호
• /
• pp.53-58
• /
• 2000

Thermal analysis, analysis of combustion residue and combustion characteristics measure ment such as burning rate or temperature were carried out to clarify the combustion mechanism of a tungsten- potassium perchlorate-barium chromate chromate delay powder. The results obtained are as follows. The main reaction of the delay powder of tungsten-potassium perchlorate-barium chromate is the oxidation of tungsten by potassium perchlorate. Barium chromate acts as a burning rate modifier, and the smaller the larger is the burning rate. Three types of delay composition used in this study show characteristic burning behavior. A stoichiomertric or a oxidizer-rich composition has a small linear burning rate. although it is has a large heat of combustion. On the other hand, a tungsten-excess or a fuel-rich composition with a small heat of combustion has a larger linear burning rate than the former, showing a small fractional oxidation of tungeten (below 10%) contained in the delay powder. From these results, a surface combustion mechanism is proposed for the combustion mechanism of this delay powder.

• Journal of Communications and Networks
• /
• 제16권6호
• /
• pp.656-666
• /
• 2014

In delay tolerant networks (DTNs), delay is inevitable; thus, making better use of buffer space to maximize the packet delivery rate is more important than delay reduction. In DTNs, epidemic routing is a well-known routing protocol. However, epidemic routing is very sensitive to buffer size. Once the buffer size in nodes is insufficient, the performance of epidemic routing will be drastically reduced. In this paper, we propose a buffer scheme to optimize the performance of epidemic routing on the basis of the Lagrangian and dual problem models. By using the proposed optimal buffer scheme, the packet delivery rate in epidemic routing is considerably improved. Our simulation results show that epidemic routing with the proposed optimal buffer scheme outperforms the original epidemic routing in terms of packet delivery rate and average end-to-end delay. It is worth noting that the improved epidemic routing needs much less buffer size compared to that of the original epidemic routing for ensuring the same packet delivery rate. In particular, even though the buffer size is very small (e.g., 50), the packet delivery rate in epidemic routing with the proposed optimal buffer scheme is still 95.8%, which can satisfy general communication demand.

• 한국정보통신학회논문지
• /
• 제10권12호
• /
• pp.2157-2165
• /
• 2006

항등 비트율 서비스를 위한 대표적인 이용자 트래픽 통제 알고리즘인 GCRA에 있어서 네트워크의 과부하와 전송 도중 불가피하게 발생하는 전송지연 변동에 따른 이용자 트래픽의 과도한 손실을 방지하기 위해서는 적절한 전송 지연변동 허용치의 설정이 매우 중요하다. 본 논문에서는 항등 비트율의 소스 트래픽에 대한 GCRA 순응검사에서 지연변동 허용치의 범 위에 따른 GCRA의 성능을 여러 측면에서 분석하고 적절한 지연변동 허용치 설정을 위한 가이드라인을 제시한다.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2004년도 춘계학술대회 논문집
• /
• pp.109-117
• /
• 2004

In this paper, we consider the aortic sinus baroreceptor, which is the most representative baroreceptor sensing the variance of pressure in the cardiovascular system, and propose heart activity control model to observe the effect of delay time in heart period and stroke volume under the regulation of baroreflex in the aortic sinus. The proposed heart activity baroreflex regulation model contains electric circuit sub-model. We constituted the time delay sub-model to observe sensitivity of heart activity baroreflex regulation model by using the variable value to represent the control signal transmission time from the output of baroreflex regulation model to efferent nerve through central nervous system. The simulation object of this model is to observe variability of the cardiovascular system by variable value in time delay sub-model. As simulation results, we observe three patterns of the cardiovascular system variability by the time delay, First, if the time delay over 2.5 second, aortic pressure and stroke volume and heart rate is observed nonperiodically and observed. Finally, if time delay under 0.1 second, then heart rate and aortic pressure-heart rate trajectory is maintained in stable state.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.75-78
• /
• 1998

In this paper, we propose a new cell discarding and scheduling scheme which reduce cell loss rate by measuring, in real time, the number of discarded cells in the queuing system with a different loss priority for each class of service such that each class of service meets its cell loss rate requirements and reduce average delay rate for the traffic that is sensitive in cell delay in output buffer of the ATM switch. Throughout the computer simulation, the existing scheduling scheme and proposed scheme are compared with respect to cell loss rate and average delay time.

• 한국항행학회논문지
• /
• 제7권2호
• /
• pp.141-148
• /
• 2003

본 논문에서는 미상 디지털 통신 신호의 심볼율을 검출하기 위한 기술들을 소개하고 그 성능을 비교해 본다. 심볼율은 delay and multiplier, square law 또는 Hilbert 변환을 이용한 방법 등의 회로를 통과한 신호의 전력스펙트럼 밀도에서 검출해 낼 수 있다. 이러한 회로들을 통과한 신호를 이산 푸리에 변환(discrete Fourier Transform) 한 결과에서 많은 스펙트럼 라인과 복수개의 피크(peak)가 검출되고 그 중 첫 번째 피크가 심볼율을 나타내는 주파수에 위치하게 된다. 만약 해당 심볼율이 아닌 다른 주파수상의 스펙트럼 라인의 값이 첫 번째 피크보다 크다면 심볼율은 잘못 검출될 것이다. 그러므로 첫 번째 피크의 값과 가장 큰 주변 스펙트럼 라인의 값의 비를 이용하여 심볼율 검출기의 성능을 비교하였다. MPSK 변조 방식에서는 -20dB 이하의 Es/N0에서는 delay and multiplier가 가장 우수한 성능을 보였고 -20dB 이상의 Es/N0에서는 Hilbert 변환 방식이 더 좋은 성능을 나타내었다. 또한 QAM 변조 방식에서 delay and multiplier 회로는 낮은 Es/N0에서는 심볼율을 검출할 수 없으며 square law 방식은 MPSK 변조 방식에서 보다 우수한 성능을 나타내었다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제1권3호
• /
• pp.152-160
• /
• 2012

This paper proposes a frame-level rate control algorithm for low delay video applications to reduce the fluctuations in the bitrate. The proposed algorithm minimizes the bitrate fluctuations in two ways with minimal coding loss. First, the proposed rate control applies R-Q model to all frames including the first frame of every group of pictures (GOP) except for the first one of a sequence. Conventional rate control algorithms do not use any R-Q models for the first frame of each GOP and do not estimate the generated-bit. An unexpected output rate result from the first frame affects the remainder of the pictures in the rate control. Second, a rate-distortion (R-D) cost is calculated regardless of the hierarchical coding structure for low bitrate fluctuations because the hierarchical coding structure controls the output bitrate in rate distortion optimization (RDO) process. The experimental results show that the average variance of per-frame bits with the proposed algorithm can reduce by approximately 33.8% with a delta peak signal-to-noise ratio (PSNR) degradation of 1.4dB for a "low-delay B" coding structure and by approximately 35.7% with a delta-PSNR degradation of 1.3dB for a "low-delay P" coding structure, compared to HM 8.0 rate control.