• 제목/요약/키워드: Delay measurement

검색결과 643건 처리시간 0.031초

3 GHz, 6 GHz 실내 환경의 지연 확산 측정 및 분석 (Delay Spread Measurement and Analysis in 3 GHz and 6 GHz Indoor Environments)

  • 이성훈;이화춘;조병록
    • 한국전자통신학회논문지
    • /
    • 제15권1호
    • /
    • pp.15-20
    • /
    • 2020
  • 본 논문에서는 건물의 실내 환경 전시관과 대회의실에 대한 지연 확산 측정 및 분석하였다. 두 건물의 실내 환경에 대해 시나리오를 작성하였다. 또한, 시스템 구성과 측정 방법을 같은 조건으로 진행하였다. 측정 조건은 중심 주파수인 3 GHz, 6 GHz로 하였고, 분석 대역은 2 GHz로 선정하였다. 측정시스템은 벡터 네트워크 분석기, 전력 증폭기, 무지향성 송·수신 안테나, 전송선로를 구성하였다. 두 건물의 실내 환경 시나리오에 따라 송신 안테나 위치를 기준으로 수신 안테나의 위치를 3개의 구역으로 나누고 각각 18개의 위치에 따라 1 m 간격으로 측정하였다. 두 건물의 전력 지연 프로파일, RMS 지연 확산, K-factor 결과를 비교 분석하였다.

Augmented 칼만 필터를 이용한 전자광학 추적 장비의 측정치 시간지연 보상과 초기 자세 결정 (Measurement Time-Delay Compensation and Initial Attitude Determination of Electro-Optical Tracking System Using Augmented Kalman Filter)

  • 손재훈;최우진;김성수;오상헌;이상정;황동환
    • 한국멀티미디어학회논문지
    • /
    • 제24권12호
    • /
    • pp.1589-1597
    • /
    • 2021
  • Due to the low output rate and time delay of vehicle's navigation results, the electro-optical tracking system(EOTS) cannot estimate accurate target positions. If an inertial measurement unit(IMU) is additionally mounted into the EOTS and inertial navigation system(INS) is constructed, the high navigation output rate can be obtained. And the time-delay can be compensated by using the augmented Kalman filter. An accurate initial attitude is required in order to have accurate navigation outputs. In this paper, an attitude determination algorithm is proposed using the augmented Kalman filter in order to compensate measurement delay of the EOTS and have accurate initial attitude. The proposed initial attitude determination algorithm consists of an augmented Kalman filter, an INS, and an integrated Kalman filter. The augmented Kalman filter compensates the time-delay of the vehicle's navigation results and the integrated Kalman filter estimates the navigation error of the INS. In order to evaluate performance of the proposed algorithm, vehicle's navigation outputs and IMU measurements were generated using sensors' model-based measurement generator and initial attitude estimation errors of the proposed algorithm and the conventional algorithm without the augmented Kalman filter were compared for the generated measurements. The evaluation results show that the proposed algorithm has better accuracy.

구조화된 불확실성을 갖는 입력지연 시스템의 강인제어 (Robust Control of Input Delayed Systems with Structured Uncertainty)

  • 이보형
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2000년도 제15차 학술회의논문집
    • /
    • pp.270-270
    • /
    • 2000
  • Input delay is frequently encountered in the practical systems since measurement delay and computational delay can be represented by input delay. In this viewpoint, this paper deals with the robust control problem of input delayed systems with structured uncertainty. Robust stability conditions are provided in terms of linear matrix inequalities(LMIs) and it is shown that the proposed conditions can give less conservative maximum bound of input delay guaranteeing robust stability.

  • PDF

Improving the Reception Performance of Legacy T-DMB/DAB Receivers in a Single-Frequency Network with Delay Diversity

  • Baek, Myung-Sun;Lee, Yong-Hoon;Hur, Namho;Kim, Kyung-Seok;Lee, Yong-Tae
    • ETRI Journal
    • /
    • 제36권2호
    • /
    • pp.188-196
    • /
    • 2014
  • This paper describes a simple delay diversity technique for terrestrial digital multimedia broadcasting (T-DMB) and digital audio broadcasting in a single-frequency network (SFN). For the diversity technique, a delay diversity scheme is adopted. In the delay diversity scheme, a non-delayed signal is transmitted in the first antenna, and delayed versions of the signal are transmitted in each additional antenna. For an SFN environment with multiple transmitters, delay diversity can be executed by controlling the emission times of the transmitters. This SFN delay diversity scheme does not require any hardware changes in either the transmitter or receiver, and perfect backward compatibility can be acquired. To evaluate the performance improvement, laboratory tests are executed with various types of commercial T-DMB receivers as well as a measurement receiver. The improvement in the bit error rate performance is evaluated using a measurement receiver, and an improvement of the threshold of visibility value is evaluated for commercial receivers. Test results show that the T-DMB system can obtain diversity gain using the described technique.

Measurement-Based Propagation Channel Characteristics for Millimeter-Wave 5G Giga Communication Systems

  • Lee, Juyul;Liang, Jinyi;Kim, Myung-Don;Park, Jae-Joon;Park, Bonghyuk;Chung, Hyun Kyu
    • ETRI Journal
    • /
    • 제38권6호
    • /
    • pp.1031-1041
    • /
    • 2016
  • This paper presents millimeter-wave (mmWave) propagation characteristics and channel model parameters including path loss, delay, and angular properties based on 28 GHz and 38 GHz field measurement data. We conducted measurement campaigns in both outdoor and indoor at the best potential hotspots. In particular, the model parameters are compared to sub-6 GHz parameters, and system design issues are considered for mmWave 5G Giga communications. For path loss modeling, we derived parameters for both the close-in free space model and the alpha-beta-gamma model. For multipath models, we extracted delay and angular dispersion characteristics including clustering results.

Indoor Propagation Characteristics at 5.2GHz in Home and Office Environments

  • Chung, Hyun-Kyu;Bertoni, Henry L.
    • Journal of Communications and Networks
    • /
    • 제4권3호
    • /
    • pp.176-188
    • /
    • 2002
  • This paper presents results of continuous wave and swept frequency response measurements over the frequency range of UNII lower and middle bands from 5.15GHz to 5.35GHz in indoor environments. From the continuous wave measurements at 5.2GHz, the excess path loss, and the statistical characteristics of the temporal and spatial fading were found. By sweeping the frequency over the band, envelope correlation as a function of frequency was found and the coherence bandwidth (CBW) was determined from the envelope correlation. Using a channel model, the CBW was used to evaluate RMS delay spread. The dependence of CBW on the antenna polarization was simulated and compared with the measurement results. The influence of room size and separation of transmitter and receiver for LOS paths on RMS delay spread was discussed.

근섬유 전도 속도 측정을 위한 시지연 추정 알고리즘 (Time delay estimation algorithm for measurement of muscle fiber conduction velocity)

  • 정정균;이진;이영석;김덕영;김성환
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
    • /
    • pp.1635-1638
    • /
    • 1997
  • A measurement of conduction veloctiy of the action potentials along the muscle fibres has been applied to various diagnosis. When we measure muscle fiber conduction velocity, it occurs that not only change of conduction velocity but alos inclusion of mipulse component by physiological and experimental reason. So, robuster time delay estimation algorithm than general methods[1] is needed to find correct time delay form these signals. In this paper we, propose new time delay estimation algorithms, robust in impulsive noise, by using characteristic of .alpha.-stable distribution whcih defines impulsive noise well. Then we apply proposed algorthms to measure muscle fiber conduction velocity and compare them with other studies.

  • PDF

오프셋 전압 보상이 적용된 지연 선로 구조의 C 대역 순시 주파수 측정용 수신기 설계 및 제작 (Design and Fabrication of a C-Band Delay Line Instantaneous Frequency Measurement Receiver with Offset Voltage Compensation)

  • 전문수;전여옥;서원구;배경태;김동욱
    • 한국전자파학회논문지
    • /
    • 제27권1호
    • /
    • pp.42-49
    • /
    • 2016
  • 본 논문에서는 지연 선로의 경로차를 이용하여 4~6 GHz의 연속파 신호를 감지하여 125 MHz의 해상도로 순시 주파수를 측정하는 순시 주파수 측정용 수신기를 설계 및 제작하였다. 수신기는 4 비트 지연 선로 구조를 가졌으며, 전력 분배기, 지연 선로, 전력 합성기, 전력 검파기, 비교기 등으로 구성되었다. 각각의 비트에 배정된 지연 선로의 주파수에 따른 경로 손실 차이를 보상하고, 전력 검파 특성의 주파수 의존성을 보정하기 위해 오프셋 전압 보상을 비교기에 적용하여 측정의 정확성을 향상시켰다.

그리드 네트워크에서 종단간 전송 지연 향상을 위한 bottleneck 링크 대역폭 측정 알고리즘 (Bottleneck link bandwidth Measurement Algorithm for improving end-to-end transit delay in Grid network)

  • 최원석;안성진;정진욱
    • 정보처리학회논문지C
    • /
    • 제10C권7호
    • /
    • pp.923-928
    • /
    • 2003
  • 본 논문은 그리드 네트워크의 패킷 지연시간단축을 위한 병목 링크 대역폭 측정 알고리즘을 제안하고자 한다. 병목 링크 대역폭 측정방법으로 packet pair 알고리즘과 Paced Probes가 있으나 이들은 pacer 패킷으로 cross traffic의 영향을 줄이면서 Paced probe 패킷들이 링크를 지날 때 발생하는 시간 차이를 이용하여 병목 링크 대역폭을 구한다. 그러나 경로상의 병목 링크 대역폭을 측정할 뿐이지 병목현상이 발생한 지점은 알 수 없는 문제점이 있다. 이를 hop-by-hop 측정에 기반한 병목 대역폭 측정을 제시하여 그리드 네트워크에서 전체적인 패킷 지연 개선을 이룰 수 있다. hop-by-hop의 병목 대역폭을 측정하기 위해 paced probe 패킷에 타임스탬프 옵션을 이용하며 병목현상 해소를 통하여 패킷 전송 지연의 단축을 시뮬레이션을 통해 알 수 있다. 본 논문에서 제시한 알고리즘으로 병목 링크의 대역폭과 위치를 파악하여 그리드 ETP나 실시간 QoS를 보장하는 데이터 전송에 기여할 것으로 기대된다.

옥상녹화의 우수유출량 저감효과에 관한 연구 -토심 및 식생유무를 중심으로- (A Field Study to Evaluate Greenroof Runoff Reduction and Delay)

  • 이동근;오승환;윤소원;장성완
    • 한국환경복원기술학회지
    • /
    • 제9권6호
    • /
    • pp.117-122
    • /
    • 2006
  • The objective of this study is to analyze the greenroof runoff quantity and delay. The experimental districts, have different soil thickness and vegetation, had installed. A measurement was conducted in Seoul University to investigate the runoff quantity and delay of the greenroof. The measurement point of runoff quality data were 8, located next to each experimental district. Also, the precipitation was measured by rain gauges(# RG2). The experimental investigation lasted from 21th July to 4th December, a total of 137 days. The results showed that the greenroof can contribute runoff retention and delay by soil, but the intensity of actual rain event affected the runoff reduction and delay. Overall, when was the rainy season, percent rainfall retention ranged 17.5% and runoff flow was delayed for 1-3 hours. But on the other hand, when was the typical rain event, percent rainfall retention ranged over 90% and runoff flow was delayed for 1-11 hours. In the result, the greenroof had the greatest runoff retention and delay, while for the typical rain event.