• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.1-3
• /
• 2006

This paper deals with a novel utilization method of the predicted current in the high performance PI current controller with a control time delay. The inevitable error of the predicted current in the linear servo drive using a permanent magnet linear synchronous motor is analyzed and a modified cross-coupling decoupling synchronous frame PI current controller is proposed in order to improve the current control response under the control time delay. Simulation and experimental results show that the proposed current controller has an improved current control performance under both the electrical uncertainties of a servo drive system and the control time delay.

• 한국정밀공학회지
• /
• 제17권7호
• /
• pp.106-112
• /
• 2000

The purpose of this paper is to study on the control of the engine idle speed under sudden A/C load which is one of the most severe disturbances on engines. Three types of the closed-loop controller are developed for the stable engine idle speed control. The input of the controller is an error of rpm. The output of the controller is an ISCV duty cycle. The anticipation delay is considered to deal with the delay time of the air mass in engine. The PID, Fuzzy and PID-type Fuzzy controllers with the anticipation delay have improved the engine idle speed condition more than current ECU map table under the A/C load.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.587-590
• /
• 2005

In this paper, the PWM inverter-motor drive system including sensor is controlled through the network. The algorithm to compensate for the time delay of ac current and ac voltage sensors due to the network is proposed. The delay time of sensors is kept nearly constant, using the synchronous signal and timers. The error between the real and estimated ac signals can be reduced by using two slopes for estimating the value of at signals. The proposed algorithms are verified with the simulation studies and experiments.

• 제어로봇시스템학회논문지
• /
• 제15권9호
• /
• pp.929-938
• /
• 2009

This paper presents a novel control methodology for communication network based nonlinear systems with time delay nature. We construct a nominal nonlinear control law for representing a linear model and a reset control system which is aimed for corrective control strategy to compensate system error due to uncertain time delay through wireless communication network. Next, online neural control approach is proposed for overcoming nonstationary statistical nature in the network topology. Additionally, DBN (Dynamic Bayesian Network) technique is accomplished for modeling of its dynamics in terms of casuality, which is then utilized for estimating prediction of system output. We evaluate superiority and reliability of the proposed control approach through numerical simulation example in which a nonlinear inverted pendulum model is employed as a networked control system.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 SMICS 2004 International Symposium on Maritime and Communication Sciences
• /
• pp.28-31
• /
• 2004

A Quadrature phase detector for high-speed delay-locked loop is introduced. The proposed Quadrature phase detector is composed of two nor gates and it determines if the phase difference of two input clocks is 90 degrees or not. The delay locked loop circuit including the Quadrature phase detector is fabricated in a 0.18 urn standard CMOS process and it operates at 5 ㎓ frequency. The phase error of the delay-locked loop is maximum 2 degrees and the circuits are robust with voltage, temperature variations.

• 대한전자공학회논문지
• /
• 제24권1호
• /
• pp.52-59
• /
• 1987

A new on-line estimation algorithm for a time varying time delay is proposed. This algorithm is based on the concept of minimization of prediction error. As only the parameters directly related to the poles and zeros of the process are estimated in the algorithm, persistently exciting condition for the convergence of parameters can be less restrictive. Under some assumptions which is necessary in adaptive control, it is shown that this algorithm estimates time varying time delay accurately. In view of computational burden, this algorithm needs far less amount of calculations than other methods. The larger the time delay is, the more effective this algorithm is . Computer simulation shows good properties of the algorithm. This algorithm can be used effectively in adaptive control of large dead time processes.

• International Journal of Internet, Broadcasting and Communication
• /
• 제4권1호
• /
• pp.18-22
• /
• 2012

In this paper, we propose an equivalent Wiener-Hopf equation. The proposed algorithm can obtain the weight vector of a TDL(tapped-delay-line) filter and the error simultaneously if the inputs are orthogonal to each other. The equivalent Wiener-Hopf equation was analyzed theoretically based on the MMSE(minimum mean square error) method. The results present that the proposed algorithm is equivalent to original Wiener-Hopf equation. In conclusion, our method can find the coefficient of the TDL (tapped-delay-line) filter where a lattice filter is used, and also when the process of Gram-Schmidt orthogonalization is used. Furthermore, a new cost function is suggested which may facilitate research in the adaptive signal processing area.

• 한국경영과학회지
• /
• 제28권4호
• /
• pp.1-19
• /
• 2003

This paper studies power and rate control for data users on the forward link of CDMA system with two cells. The QoS for data users is specified by delay and error rate constraints as well as a family of utility functions representing system throughput and fairness among data users. Optimal power and rate allocation problem is mathematically formulated as a nonlinear programming problem, which is to maximize total utility under delay and error rate constraints, and optimal power and rate allocation scheme (OPRAS) is proposed to obtain a good solution in a fast time. Computational experiments show that the proposed scheme OPRAS works very well and increases total utility compared to the separate power and rate allocation scheme (SPARS) which considers each cell individually.

• 전자공학회논문지
• /
• 제50권7호
• /
• pp.253-257
• /
• 2013

본 논문은 지연된 출력과 미지의 외란을 갖는 비선형 시스템에 대한 강인 관측기 설계방법을 제안한다. 지연된 출력의 존재에도 불구하고 관측기의 추정오차에 대한 외란의 효과를 원하는 수준까지 줄일 수 있음을 보인다. 강인 관측기의 존재조건은 시간 지연 값에 의존적인 선형행렬 부등식을 이용하여 제시한다. 마지막으로 제안한 결과의 유효성을 증명하기 위하여 수치 예제를 제공한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.1149-1152
• /
• 1999

In this paper we analyzed each region of specific points and ｅ-Δｅphase plane in order to make fuzzy rule base. After we composed the fuzzy control rules which can decrease rise time, delay time, maximum overshoot than basic fuzzy control rules. The composed method are converged more rapidly than single rule base in convergence region. Proposed method is alternately use at specific points of ｅ-Δｅphase plane with two fuzzy control rules, that is one control rule occruing the steady state error used in transient region and another fuzzy control rule use to decrease the steady state error and rapidly converge at the convergence region. Two fuzzy control rules in the ｅ-Δｅ phase plane decide the change time according to response characteristics of plants. As the results of simulation through the second order plant and the delay time plan, Proposed dual fuzzy control rules get the good response compare with the basic fuzzy control rule.