• 제목/요약/키워드: Delay Variation

검색결과 503건 처리시간 0.026초

PLL을 구동하기 위한 DDFS의 성능분석 (The Performance Analysis of the DDFS to drive PLL)

  • 손종원;박창규;김수욱
    • 한국정보통신학회논문지
    • /
    • 제6권8호
    • /
    • pp.1283-1291
    • /
    • 2002
  • 본 논문에서는 DDFS로 구동하는 PLL을 Q-logic cell based library를 사용하여 schematic 상에서 설계하고 FPGA 0L32$\times$16B를 사용하여 구현하였으며, 측정 결과 주파수 합성기의 스위칭 속도는 DDFS에 사용되는 레지스터 단수와 같다는 결론을 얻을 수 있었다 시뮬레이션 결과 클럭지연은 11클럭 후에 발생되는 것을 알았고, 입력 상태가 랜덤하게 들어온다면 출력에 영향이 있음을 알았다. 따라서 입력상태가 일정간격을 가지게 함으로써 PLL을 구동하기 위한 DDFS는 잡음정형기를 사용하는 것이 좋으며, 또한 D/A 변환기의 대역이 매우 넓어야 하고, PLL의 스위칭 속도보다는 작은 입력 컨트롤 워드의 변화가 바람직하다는 것을 알 수 있다.

Open Ended Folded-Slot Antenna with a Wide n-Shaped Slot for Ultra-Wideband Applications

  • Yoo, Jin-Ha;Lee, Young-Soon
    • International Journal of Internet, Broadcasting and Communication
    • /
    • 제12권2호
    • /
    • pp.83-89
    • /
    • 2020
  • A microstrip feedline based open ended folded-slot antenna is proposed for ultra-wideband (UWB) applications. The prototype of the proposed antenna is fabricated on the FR4 dielectric substrate. The proposed antenna has a wide n-shaped slot that is useful for designing circuit components on the same printed circuit board (PCB) as that of the radio frequency (RF) modules. The proposed antenna use two kinds of slots as radiators, and each slots have different characteristics because of the different type of ends of the slot. The wideband characteristic can be obtained by resonances of each slot which are occurred at different frequencies. The measured impedance bandwidth (S11≤ -10 dB) is 2.9-11.56 GHz, and the antenna peak gain is 2-4 dBi over the UWB range. The antenna has a stable omni-directional radiation pattern and only a small group-delay variation across the UWB passband. In addition, we present a modified design with band-notched characteristics of a 5 GHz wireless local area network (WLAN) frequency band.

DGS구조를 이용한 초광대역 대역통과 여파기 (A Ultra-Wideband Bandpass Filter Using DGS structure)

  • 정승백;양승인
    • 대한전자공학회논문지TC
    • /
    • 제46권5호
    • /
    • pp.162-167
    • /
    • 2009
  • 본 논문에서는 대역통과 여파기와 저역통과 여파기를 하나의 구조로 합성하여 크기 증가 없이 초광대역 특성을 가지는 여파기를 설계 및 구현하였다. 제안한 구조는 그 구조가 간단하다. 그리고 저역 통과 특성을 얻기 위하여 이미 잘 알려진 DGS(Defected Ground Structure) 구조를 이용하였다. 기존의 대역통과 여파기와 저역통과 여파기를 직접 연결하였을 때 보다 크기를 줄일 수 있었다. 측정결과 통과대역은 $2.1GHz{\sim}10.56GHz$이고 삽입손실은 최대 0.5dB, 반사손실은 최소 20dB, 군 지연은 $0.13ns{\sim}0.35ns$ 까지 최대 변화폭 0.23ns의 변화를 보인다.

사다리꼴 모양의 UWB 안테나 설계 (A Trapezoidal Ultra-Wideband Antenna Design)

  • 이정남;이성훈;박종권
    • 한국전자파학회논문지
    • /
    • 제16권3호
    • /
    • pp.235-245
    • /
    • 2005
  • 본 논문에서는 UWB 통신 시스템에서 사용할 수 있는 CPW 구조를 이용한 새로운 UWB 안테나를 설계 제작하고 측정하였다. 제안된 안테나는 CST사의 Microwave Studio를 사용하여 설계하였다. 기판은 두께가 0.762 mm이며 유전율이 4.5인 TMM4 기판을 사용하였다.안테나는 VSWR$\leq$2를 기준으로 3.1 GHz에서 11.5 GHz까지 UWB 통신 대역을 만족하며, 사각 슬롯을 이용하여 IEEE 802.1la주파수 대역(5.15GHz$\~$5.825GHz)은 차단하였다. 측정결과, 안테나의 그룹딜레이 변화량은 1 ns 미만으로 UWB 통신 시스템에 적합한 안테나이다.

고속 이동 SFN 채널에서 OFDM 수신기의 채널 추정 방법 (A Channel Estimation Scheme for OFDM receiver in a Fast Mobile SFN Channel)

  • 구영모
    • 방송공학회논문지
    • /
    • 제21권4호
    • /
    • pp.552-561
    • /
    • 2016
  • OFDM 시스템에서 심벌의 주파수 영역 반송파는 일반적으로 데이터 반송파와 분산 파일럿 반송파로 구성되고 수신기는 여러 심벌의 분산 파일럿 반송파를 시간축으로 보간하여 채널을 추정한다. 그러나 수신기가 고속으로 이동하는 경우에는 시간축 보간은 채널의 급속한 변화를 따라가지 못한다. 한편 시간축 보간을 하지 않고 매 심벌 채널 추정을 하면 고속 채널 추정은 가능하나 파일럿 반송파 개수가 충분하지 않아 다중 경로 지연이 큰 SFN 채널에서 채널 추정이 어렵다. 본 논문에서는 SFN 채널에서도 고속 채널 추정이 가능한 방법을 제안하고 이를 DVB-T 수신기에 적용하여 SFN 채널에서 도플러 이동 수신 성능이 향상되는 것을 보인다.

고추씨 기름의 저장 및 가열에 따른 이화학적 변화에 관한 연구 (Studies on the Variation of Physico-Chemical Characteristics During Storage and Frying)

  • 최영진;고영수
    • 한국식품조리과학회지
    • /
    • 제6권2호
    • /
    • pp.67-76
    • /
    • 1990
  • To observe the propability as the frying oil and oxidative stability of red pepper seed oil, some physico-chemical tests of the oil were examined during 21 days storage period at 5$^{\circ}C$, 15$^{\circ}C$ and 30$^{\circ}C$, and AOM value determined and after heating the oil at 180${\pm}$5$^{\circ}C$ for 40 hours with or without antioxidants. The analysis storage stability of red pepper seed oil showed that the quality of storage group at 5$^{\circ}C$ was almost as good as fresh oil, and the storage group at 30$^{\circ}C$ showed certain degree of rancidity. Change of physico-chemical characteristic during storage were so small so that storage stability of red pepper seed oil was found to be good. AOM stability of red pepper seed oil was 7 hours which is lower than other vegetable oil, but the degree of stability grew greatly after adding phenolic antioxidants, such on TBHQ or PG. As for the chemical change after heating continuously for 40 hours, acid value, peroxide value and refractive index increased, but iodine value decreased as the heating processed. The fatty acid composition also showed the remarkable reduction of linoleic acid. The addition of antioxidants resulted in the delay of oxidation, the degree of which was greater in TBHQ than in PG.

  • PDF

Performance Investigation of Insulated Shallow Extension Silicon On Nothing (ISE-SON) MOSFET for Low Volatge Digital Applications

  • Kumari, Vandana;Saxena, Manoj;Gupta, R.S.;Gupta, Mridula
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제13권6호
    • /
    • pp.622-634
    • /
    • 2013
  • The circuit level implementation of nanoscale Insulated Shallow Extension Silicon On Nothing (ISE-SON) MOSFET has been investigated and compared with the other conventional devices i.e. Insulated Shallow Extension (ISE) and Silicon On Nothing (SON) using the ATLAS 3D device simulator. It can be observed that ISE-SON based inverter shows better performance in terms of Voltage Transfer Characteristics, noise margin, switching current, inverter gain and propagation delay. The reliability issues of the various devices in terms of supply voltage, temperature and channel length variation has also been studied in the present work. Logic circuits (such as NAND and NOR gate) and ring oscillator are also implemented using different architectures to illustrate the capabilities of ISE-SON architecture for high speed logic circuits as compared to other devices. Results also illustrates that ISE-SON is much more temperature resistant than SON and ISE MOSFET. Hence, ISE-SON enables more aggressive device scaling for low-voltage applications.

DETERMINATION OF GPS HEIGHT WITH INCORPORATION OF USING SURFACE METEOROLOGICAL MEASUREMENTS

  • Wang, Chuan-Sheng;Liou, Yuei-An;Yeh, Ta-Kang
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
    • /
    • pp.313-316
    • /
    • 2008
  • Although the positioning accuracy of the Global Positioning System (GPS) has been studied extensively and used widely, it is still limited due to errors from sources such as the ionospheric effect, orbital uncertainty, antenna phase center variation, signal multipath and tropospheric influence. This investigation addresses the tropospheric effect on GPS height determination. Data obtained from GPS receivers and co-located surface meteorological instruments in 2003 are adopted in this study. The Ministry of the Interior (MOl), Taiwan, established these GPS receivers as continuous operating reference stations. Two different approaches, parameter estimation and external correction, are utilized to correct the zenith tropospheric delay (ZTD) by applying the surface meteorological measurements (SMM) data. Yet, incorrect pressure measurement leads to very poor accuracy. The GPS height can be affected by a few meters, and the root-mean-square (rms) of the daily solution ranges from a few millimeters to centimeters, no matter what the approach adopted. The effect is least obvious when using SMM data for the parameter estimation approach, but the constant corrections of the GPS height occur more often at higher altitudes. As for the external correction approach, the Saastamoinen model with SMM data makes the repeatability of the GPS height maintained at few centimeters, while the rms of the daily solution displays an improvement of about 2-3 mm.

  • PDF

다중 모델을 이용한 비선형 시스템의 예측제어에 관한 연구 (Nonlinear Predictive Control with Multiple Models)

  • 신승철;변증남
    • 전자공학회논문지SC
    • /
    • 제38권2호
    • /
    • pp.20-30
    • /
    • 2001
  • 본 논문에서는 신경회로망 기반의 다중 모델을 이용한 예측제어 방법에 간하여 기술한다. 플랜트의 특정한 피라미터 값들에 대해 다중의 모델을 구성하고, 이들 중 현재 시간에서 최적의 예측 값을 제공하는 모델을 스위칭 기법으로 선택한다. 선택된 모델의 예측 값을 기반으로 비선형 프로그래밍 방법으로 현재 시간에서의 제어 입력 값을 구하여 예측제어를 수행한다. 제안한 방법을 시간지연 값이 변하거나 매개변수 값이 가변하는 시스템에 적용하여 그 유용성을 보이고, 부하가 변동하는 자기부상열차 시스템의 부상제어에 이용한 모의 실험 결과를 보인다.

  • PDF

ATM-PON에서의 G.983.1을 적용한 매체 접근 제어 프로토콜의 설계에 관한 연구 (A Study on design of G.983.1 based MAC protocol for ATM-PON)

  • 장성호;노태곤;장종욱
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2001년도 춘계종합학술대회
    • /
    • pp.125-128
    • /
    • 2001
  • 광대역 액세스 망에서 합류, 분배 지점에서의 효율을 고려한 PON(Passive Optical Network)의 설계는 중요한 관심거리가 되고 있다. PON 구조는 매우 간단하지만, 가입자들에서 발생하는 상향 트래픽 제어를 위해서는 매체 접근 제어 프로토콜이 필요하다. 이러한 매체 접근 제이 프로토콜은 트래픽 클래스별 QoS(Duality of Service) 관리 기능, 효율적인 망 자원 분배 기능, CDV(Cell Delay Variation) 최소화 기능 등이 포함되어야 한다. 본 논문에서는 ATM-PON과 흠 네트워크 환경에 적합한 성능을 제공하고 앞서 기술한 기능을 수행하는 매체 접근 제이 프로토콜 설계에 관한 연구 내용을 기술한다. 설계된 프로토콜은 요구-할당(Request-Permit) 알고리즘을 사용하여 동적인 상향 대역 할당이 가능하게 설계하였다. 이를 위해 ITU-T 권고 G.983:1을 이용하였고, 이에 더하여 새로운 메시지 형식과 동적 대역할당 알고리즘 등을 제시하였다.

  • PDF