• 제목/요약/키워드: Delay Variation

검색결과 503건 처리시간 0.025초

온도변화에 따른 HEMT의 DC 특성 연구 (Temperature dependency of dc Characteristics for HEMTs)

  • 김진욱;황광철;이동균;안형근;한득영
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2000년도 하계학술대회 논문집
    • /
    • pp.29-32
    • /
    • 2000
  • In this paper, an analytical model for I-V characteristics of a HEMTs is Proposed. The developed model takes into account the temperature dependence of drain current. In high-speed ICs for optical communication systems and mobile communication systems, temperature variation affects performance; for example the gain, efficiency in analog circuits and the delay time, power consumption and noise mrgin in digital circuits. To design such a circuit taking into account the temperature dependence of the current-voltage characteristic is indispensible. This model based on the analytical relation between surface carrier density and Fermi potential including temperature dependent coefficients.

  • PDF

지연 입력을 가진 서보시스템의 상태 추정자 설계 (The State Estimator Design for Servo system with Delayed Input)

  • 신두진;공정자;허욱열
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제48권5호
    • /
    • pp.607-614
    • /
    • 1999
  • This paper deals with the design problem of the state estimator for servo system. The servo system has input time delay which depends on the computational time of control algorithm. The delayed input is a factor that brings out the state estimation error. So in order to reduce the state estimation error of the system, we propose a state estimator in which the delayed input of the system is considered. For this purpose, discrete time state space model is established accounting for the delayed input and a state estimator is designed based on this model. Kalman filter algorithm is employed in the design of the state estimator. The proposed estimator is used in the speed control of servo system with delayed input. Performance of the proposed state estimator is exemplified via simulations and experiments for servo system. Also, robustness of the proposed estimator to modeling error by variation of the system parameters is also shown in simulations.

  • PDF

전기로의퍼지제어에 관한 연구 (A Study on the Fuzzy Control of Electric Furnace)

  • 명노직;강민구;허욱열
    • 대한전기학회논문지
    • /
    • 제40권12호
    • /
    • pp.1262-1268
    • /
    • 1991
  • The electric furnace which has time delay and time varying characteristics cannot be controlled easily. In this paper, a fuzzy controller for a electric furnace is implemented using one chip processor 8751 and IBM PC. The fuzzy controller is implemented in the PC. The One chip processor 8751 can sense the furnace internal temperature and pass it to IBM PC and generate the driving signal for SSR. The membership function of the fuzzy controller is determined by Least Square method. from the experiments, we can show that the fuzzy controller can improve robustness to the load variation. And the settling time is reduce 4500 (sec) to 2500 (sec).

CAN(Controller Area Network) 프로토콜을 이용한 네트워크 제어시스템 설계 (Design Methodology of Networked Control System using CAN(Controller Area Network) Protocol)

  • 정준홍;최수영;조용석;박기헌
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 하계학술대회 논문집 D
    • /
    • pp.2328-2330
    • /
    • 2003
  • This paper presents a new design methodology of networked control system using CAN(Controller Area Network). Feedback control systems having control loops closed through a network are called networked control systems. We design CAN nodes which can transmit control and monitoring data through network bus and apply these to networked control system design. We analyze the variation of stability property according to network-induced delay and determine a proper sampling period of networked control system that preserves stability performance. The results of the experimental example validate effectiveness of our networked control system.

  • PDF

LHTL 위상변위기를 이용한 4×4 광대역 위상배열안테나 (4×4 Broadband Phased Array Antenna Using LHTL Based Phase Shifter)

  • 박순우;김홍준
    • 전기학회논문지
    • /
    • 제66권2호
    • /
    • pp.379-382
    • /
    • 2017
  • This paper proposes a $4{\times}4$ broadband phased array antenna using a Left-Handed Transmission Line (LHTL) based phase shifter. The phased array is constructed with sixteen quasi-Yagi antenna elements and the phase shifters, as well as four power dividers. A key component of the system, the LHTL based phase shifter is able to control a phase delay of incident waves linearly and continuously. The fabricated phased array antenna operate for a frequency range of 800 MHz (1.6 GHz~2.4 GHz). The beam scanning range of the $4{\times}4$ array antenna is ${\pm}27^{\circ}$ horizontally and vertically while the antenna gain is maintained with a variation of ${\pm}1.4dBi$.

Real-time photoplethysmographic heart rate measurement using deep neural network filters

  • Kim, Ji Woon;Park, Sung Min;Choi, Seong Wook
    • ETRI Journal
    • /
    • 제43권5호
    • /
    • pp.881-890
    • /
    • 2021
  • Photoplethysmography (PPG) is a noninvasive technique that can be used to conveniently measure heart rate (HR) and thus obtain relevant health-related information. However, developing an automated PPG system is difficult, because its waveforms are susceptible to motion artifacts and between-patient variation, making its interpretation difficult. We use deep neural network (DNN) filters to mimic the cognitive ability of a human expert who can distinguish the features of PPG altered by noise from various sources. Systolic (S), onset (O), and first derivative peaks (W) are recognized by three different DNN filters. In addition, the boundaries of uninformative regions caused by artifacts are identified by two different filters. The algorithm reliably derives the HR and presents recognition scores for the S, O, and W peaks and artifacts with only a 0.7-s delay. In the evaluation using data from 11 patients obtained from PhysioNet, the algorithm yields 8643 (86.12%) reliable HR measurements from a total of 10 036 heartbeats, including some with uninformative data resulting from arrhythmias and artifacts.

Evaluation of Power Flow Control Strategy and DC-link Voltage Regulation for DC Microgrid

  • Nguyen, Thanh Van;Kim, Kyeong-Hwa
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2019년도 전력전자학술대회
    • /
    • pp.416-417
    • /
    • 2019
  • In this paper, an effective power flow control strategy (PFCS) based on the centralized control approach and a DC-link (DCV) restoration algorithm for DC microgrid (DCMG) are presented. By investigating the statuses of system power units, eleven operating modes are given to ensure the system power balance under various conditions. To avoid the system power imbalance caused by the delay of grid fault detection, a reliable DCV restoration algorithm is proposed. In the proposed scheme, when an abnormal variation of the DCV is detected, the battery instantly starts a local emergency control mode to restore the DCV to the nominal value regardless of the control mode from the central controller. The simulations and experiments are carried out to prove the effectiveness of the PFCS and the proposed DCV restoration algorithm.

  • PDF

태풍 RUSA의 진행에 따른 GPS PWV 변화량 연구 (GPS PWV Variation Research During the Progress of a Typhoon RUSA)

  • 송동섭;윤홍식;서애숙
    • 한국측량학회지
    • /
    • 제21권1호
    • /
    • pp.9-17
    • /
    • 2003
  • 한반도에 막대한 피해를 입힌 태풍 RUSA는 2002년 8월 30일에서 9월 1일간 한반도를 지나갔다. 이 태풍 RUSA가 진행하는 동안 GPS 수신 자료와 기상 자료를 이용하여 대류권에서의 습윤 지연량을 산출하고, 이 습윤지연량을 천정방향의 수증기량(IWV)으로 환산하여 이 수증기량으로부터 PWV(Precipitable Water Vapor)를 산출하였다. 본 연구에서는 서울, 원주, 서산, 상주, 전주, 청주, 대구, 울진, 진주, 대전, 목포, 속초, 제주의 13개 GPS 상시관측소 데이터를 이용하여 PWV를 산출하였다. 산출한 PWV의 시계열 분석을 통해 실제 강수량과 비교한 결과 태풍 RUSA가 진행하는 동안 PWV가 정점을 보이는 부근에서 실제 강수량이 발생하였다. 또한, 태풍 RUSA의 이동 경로와 PWV가 최고조를 이루는 시간을 분석한 결과 밀접한 관계가 있음을 알 수 있었다. GPS 자료로부터 산정된 PWV를 이용하여 tomograph를 작성하고 GMS 위성 영상과 비교한 결과 매우 근접한 결과를 얻을수 있었으므로 기상 예보를 위한 수치예보모델로의 활용 가능성을 제시할 수 있었다.

TDP(time-dependent parameters)를 적용하여 분석한 자율신경계 반응에 의한 감성인식에 대한 연구 (The study on emotion recognition by time-dependent parameters of autonomic nervous response)

  • 김종화;황민철;김영주;우진철
    • 감성과학
    • /
    • 제11권4호
    • /
    • pp.637-644
    • /
    • 2008
  • 감성을 인식하고 반응하는 감성컴퓨터를 개발하기 위한 감성인식에 대한 연구가 활발하다. 본 연구는 2차원으로 정의한 감성을 측정하기 위해서 시간에 따른 생리신호의 반응 변수를 정의하고 그 변수로 인한 감성을 구분하고자 하였다. 10명의 대학생에게 16장의 감성을 유발시킬 수 있는 이미지를 제시하였다. 그리고 자율신경계 반응으로 ECG(electrocardiogram), PPG(photoplethysmogram), GSR(Galvanic skin response), RSP (respiration), 그리고 SKT(skin temperature)를 측정하였다. 본 연구는 자율신경계 반응에 대해 Delay, Activation, Half recovery 그리고 Full recovery로 이루어진 TDP(Time Dependent Parameters)를 정의하고 감성을 구분할 수 있는지에 대한 통계적 유의성을 검증하였다. 그 결과, TDP가 감성을 구분할 수 있는 유의미한 변수로 확인하였고 특징적 경향을 보임을 알 수 있었다. 그러므로 본 연구는 TDP가 감성 인식을 위한 유효한 변수일 가능성을 보였다.

  • PDF

일산화탄소/수소 혼합기의 가열된 동축류 제트에서 자발화된 층류 부상화염의 특성 (Characteristics of Autoignited Laminar Lifted Flames in Heated Coflow Jets of Carbon Monoxide/Hydrogen Mixtures)

  • 최병철;정석호
    • 대한기계학회논문집B
    • /
    • 제36권6호
    • /
    • pp.639-646
    • /
    • 2012
  • 가열된 동축류 공기에서 일산화탄소/수소의 층류 제트에 대한 자발화된 부상화염의 특성을 조사하였다. 그 결과로 자발화가 발생하지 않는 영역에서는 제트속도의 증가에 따라 노즐부착화염에서 안정화된 층류 부상화염을 거치지 않고 바로 화염날림이 발생하였다. 자발화 영역에서, 질소 희석된 일산화탄소의 자발화된 부상화염은 산화제 내의 함유된 수분에 따른 점화지연시간의 변동으로 그 부상높이가 크게 영향을 받았다. 그리고 수소에 의한 저온 자발화 영역에서 자발화된 부상화염은 제트속도의 증가에 따라 부상높이가 감소하다가 증가하는 독특한 현상이 발생하였다. 점화지연시간에 의한 자발화된 층류 부상화염의 안정화 메커니즘을 기반으로, 그 부상높이의 거동은 점화 과정에서 발생하는 열손실의 영향뿐만 아니라 연료제트의 운동량과 질량의 선호 확산에 의하여 영향을 받을 수 있다는 것을 확인하였다.