• Fire Science and Engineering
• /
• v.29 no.6
• /
• pp.1-5
• /
• 2015

In this study, the combustion characteristics of Hinoki Cypress Louver were measured after performing pressure impregnation with aqueous solution of boric acid, borax, and ammonium phosphate. The characteristics measured include ignition time, critical heat flux, and mass loss rate by incident hear flux (25, 30 and $50kW/m^2$). The samples used for the test were $100{\times}100{\times}10mm$, and the 5 min variation for each incident heat flux was measured 3 times. The results show that the ignition time for incident heat flux of $25kW/m^2$ showed a delay effect of 17.4 to 21.3% except for Type C-H. There was no significant difference at 35 and $50kW/m^2$ in the average mass loss rate in Types A-H and D-H, which had lower rates than Type N-H, which was predicted to be higher than that of Type N-H ($10.7kW/m^2$) by 38.22 to 60.46%. It is thus expected that at the time of initial primary fire, there would be a delay effect against fire spread.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.1
• /
• pp.30-38
• /
• 2019

In recent years, researches on various communication methods have been conducted, particularly on OFDM (Orthogonal Frequency Division Multiplexing) and CDMA (Code Division Multiple Access) methods, as the use of underwater communication increases. While OFDM is, in general, advantageous in that it is resistant to Doppler in the water and it enables a high-speed communication, CDMA is resistant to frequency selective fading in the water and it can reduce energy consumption. Therefore, in this paper, we performed experiments in the shallow water in Western Sea of Korea to analyze the performance of OFDM and CDMA communication systems in the underwater channel environment. The maximum delay spread and Doppler spread were drawn by using the data obtained from the real sea area in order to analyze the underwater channel environment characteristics of the shallow water in Western Sea of Korea. The communication performances of OFDM and CDMA are shown as coded BER (Bit Error Rate) according to the variation of the maximum delay spread and the Doppler spread, respectively. The result of the analysis show that the OFDM method has more resistant performances to the underwater channel environment changes than the CDMA method.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.3
• /
• pp.75-88
• /
• 2009

This paper presents a video quality assessment method based on quality degradation factors of real-time multimedia streaming services. The video quality degradation is caused by video source compression and network states. In this paper, we propose a blocky metric on an image domain to measure quality degradation by video compression. In this paper, the proposed boundary strength index for the blocky metric is defined by ratio of the variation of two pixel values adjacent to $8{\times}8$ block boundary and the average variation at several pixels adjacent to the two boundary pixels. On the other hand, unnatural image movement caused by network performance deterioration such as jitter and delay factors can be observed. In this paper, a temporal-Jerkiness measurement method is proposed by computing statistics of luminance differences between consecutive frames and play-time intervals between frames. The proposed final Perceptual Video Quality Metric (PVQM) is proposed by consolidating both blocking strength and temporal-jerkiness. To evaluate performance of the proposed algorithm, the accuracy of the proposed algorithm is compared with Difference of Mean Opinion Score (DMOS) based on human visual system.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.14 no.1
• /
• pp.11-18
• /
• 2012

Daily temperature data produced by harmonic analysis of monthly climate summary have been used as an input to plant phenology model. This study was carried out to evaluate the performance of the harmonic based daily temperature data in prediction of major phenological developments and to apply the results in improving decision support for agricultural production in relation to the climate change scenarios. Daily maximum and minimum temperature data for a climatological normal year (Jan. 1 to Dec. 31, 1971-2000) were produced by harmonic analysis of the monthly climate means for Seoul weather station. The data were used as inputs to a thermal time - based phenology model to predict dormancy, budburst, and flowering of Japanese cherry in Seoul. Daily temperature measurements at Seoul station from 1971 to 2000 were used to run the same model and the results were compared with the harmonic data case. Leaving no information on annual variation aside, the harmonic based simulation showed 25 days earlier release from endodormancy, 57 days longer period for maximum cold tolerance, delayed budburst and flowering by 14 and 13 days, respectively, compared with the simulation based on the observed data. As an alternative to the harmonic data, 30 years daily temperature data were generated by a stochastic process (SIMMETEO + WGEN) using climatic summary of Seoul station for 1971-2000. When these data were used to simulate major phenology of Japanese cherry for 30 years, deviations from the results using observed data were much less than the harmonic data case: 6 days earlier dormancy release, 10 days reduction in maximum cold tolerance period, only 3 and 2 days delay in budburst and flowering, respectively. Inter-annual variation in phenological developments was also in accordance with the observed data. If stochastically generated temperature data could be used in agroclimatic mapping and zoning, more reliable and practical aids will be available to climate change adaptation policy or decision makers.

• Elastomers and Composites
• /
• v.44 no.2
• /
• pp.150-155
• /
• 2009

This study examined the effects of the concentration variation of the silyl hydride (Si-H) functional group in polymethylhydrogen siloxane cross-linker and the vinyl-functional group in silicone prepolymer on the physical properties of the dental polyvinylsiloxane impression materials (PVS). When the SiH/Vinyl ratio was 1.6 (Group $\underline{C6}$ containing ${\underline{C}}ross$-linker $\underline{6}$ parts), the setting rate was too slow even though their tensile strength was the highest within the tested groups. When the SiH/Vinyl ratio was 3.2 (Group C12), the setting rate was too fast to allow appropriate working time even though their mechanical properties were good. The C14 group showed rather lower tensile strength compared to the groups having lower cross-linker contents. Notably, too much incorporation of cross-linker, like C16 group, induced delay of the setting, by which the mechanical and manipulation properties were detrimentally affected.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.149-158
• /
• 2005

This paper proposes a congestion avoidance algorithm which provides stable throughput and transmission rate regardless of buffer size by limiting the TCP congestion window in fixed bandwidth networks. Additive Increase, Multiplicative Decrease (AIMD) is the most commonly used congestion control algorithm. But, the AIMD-based TCP congestion control method causes unnecessary packet losses and retransmissions from the congestion window increment for available bandwidth verification when used in fixed bandwidth networks. In addition, the saw tooth variation of TCP throughput is inappropriate to be adopted for the applications that require low bandwidth variation. We present an algorithm in which congestion window can be limited under appropriate circumstances to avoid congestion losses while still addressing fairness issues. The maximum congestion window is determined from delay information to avoid queueing at the bottleneck node, hence stabilizes the throughput and the transmission rate of the connection without buffer and window control process. Simulations have performed to verify compatibility, steady state throughput, steady state packet loss count, and the variance of congestion window. The proposed algorithm can be easily adopted to the sender and is easy to deploy avoiding changes in network routers and user programs. The proposed algorithm can be applied to enhance the performance of the high-speed access network which is one of the fixed bandwidth networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1B
• /
• pp.29-40
• /
• 2004

In this paper, we propose a new early congestion detection and notification technique called QR-AQM. Unlike RED and it's variation, QR-AQM measures the total traffic rate from TCP sessions, predicts future network congestion, and determine the packet marking probability based on the measured traffic rate. By incorporating the traffic rate in the decision process of the packet marking probability, QR-AQM is capable of foreseeing future network congestion as well as terminating congestion resolution procedure in much more timely fashion than RED. As a result, simulation results show that QR-AQM maintains the buffer level within a fairly narrow range around a target buffer level that may be selected arbitrarily as a control parameter. Consequently, compared to RED and its variations, QR-AQM is expected to significantly reduce the jitter and delay variance of packets traveling through the buffer while achieving nearly identical link utilization.

• Toxicological Research
• /
• v.19 no.3
• /
• pp.227-234
• /
• 2003

2-Bromopropane (2-BP), a halogenated propane analogue, is a substitute for chlorofluorocarbones (CFCs) which have a great potential to destroy the ozone layer and to warm the earth's environment. The present study was undertaken to evaluate the potential adverse effects of 2-BP on pregnant dams and embryo-fetal development after maternal exposure during the gestational days (GD) 6 through 17 in ICR mice. The test chemical was administered subcutaneously to pregnant mice at dose levels of 0, 313, 625 or 1,250 mg/kg/day. All dams were subjected to caesarean section on GD 18 and their fetuses were examined for external, visceral and skeletal abnormalities. In the 1,250 mg/kg group, maternal toxicity included an increase in the incidence of abnormal clinical signs and a decrease in the maternal body weight, body weight gain, and corrected body weight. Developmental toxicity included a decrease in the fetal body weight, a reduction in the placental weight, an increase in the fetal skeletal variation and ossification delay. There were no adverse effects on either pregnant dams or embryo-fetal development in the 313 and 625 mg/kg groups. These results suggest that a 12-day subcutaneous dose of 2-BP is embryotoxic at a maternally toxic dose (i.e., 1,250 mg/kg/day) in ICR mice. In the present experimental condition, the no-observed-adverse-effect level of 2-BP is considered to be 625 mg/kg/day for dams and embryo-fetuses, respectively.

• Journal of Advanced Navigation Technology
• /
• v.9 no.1
• /
• pp.71-78
• /
• 2005

Nowadays, the demand of HPI(High-speed Portable Internet) has been gradually increased to support the various services of high speed wire line internet such as xDS. HPI can support high speed internet in anyplace, anytime. For successful development of HPI, the performance should be evaluated according to the cell size and/or the number of users and cell design should be carried out based on these criteria. The previous cellular systems using CDMA technique focus on the establishment of link based on power control but HPI systems consider the QoS (Quality of Service) and its performance based on the scheduling technique. The results from the system level simulation show that the throughput is sensitive to the cell size and the number of users has little impact on it. Moreover, the variation of service delay is more sensitive to the number of users but less to the cell size.

• Journal of IKEEE
• /
• v.18 no.3
• /
• pp.376-382
• /
• 2014

In this paper, we propose a advanced attitude PID controller and sensor fusion method robust to the vibration of the quadcopter unmanned air vehicle using four BLDC motors. When the gyro sensor and acceleration sensor are fused, a complementary filter is designed to ignore the vibrations generated by the motors and to complement the drawbacks. As a result, we obtain accurate results than using each sensor. Also, it is possible to obtain a low delay results in robust to vibration than the low-pass filter or moving average filter, which is generally used for quadcopter. And we improved D controller, which have being used for attitude control of quadcopter, to quadcopter using gyro sensor. it was confirmed that the attitude is stabilized and error is reduced By using gyro sensor output instead of variation of estimated angle in D control.